Instrotech has announced the launch of Siko’s new range of optical distance sensors – the LT5000, LA60 and LA170 – whose technical specifications, like linearity and resolution are comparable with those of wire-actuated transducers.
As technology and handling of the optical distance sensors are different from the wire-actuated transducers, Siko forsees the possibility of using the new sensors for applications where the wire-actuated transducer can only be used with difficulty or possibly not at all. Although the measuring principle is optical and the casing made of plastic, the standard values in regards to environmental conditions are more than acceptable with a IP67 protection class and a operating temperature of -20 to 60°C.
Applications for the optical distance sensors include:
• Measuring distances for which Siko’s SG5 with 600 mm wire is too large.
• Position measuring eg, for warehouse applications where wire actuated transducers cannot be used due to mechanical wear resulting from continuous operation.
• For applications where wire-actuated transducers, so far, are only used as a compromise solution, as wire is too difficult to guide.
The LT5000 for large distances is a laser-based measuring system with a transit time technique. This means that a position value can be captured on almost any reflective surface, up to a maximum distance of up to five metres.
The LA60 and LA170 for the near zone, feature an optical measuring system with LED, based on the triangulation measuring principle, which means that within a range of 20-80 mm for the LA60 and 30-200 mm for the LA170, the reflected beam of light (depending on the angle of irradiation) gives the corresponding position value.
The LA60 and LA170 have all of the same features of the LT5000 and have a voltage output of 1-10 VDC, plus an additional two adjustable switching points.
Accessories and various options of mounting angles and cable connections are available.
Next-generation condition monitoring
Sensors & Transducers
The next generation Sitrans MS200 multisensor from Siemens is setting new standards in condition monitoring.
Read more...Telco sensors for blocked/empty chute detection
Sensors & Transducers
Telco sensors overcome the problems of contaminated environments through powerful high-performance infrared sensors that ensure penetration of harsh pollution and guarantee reliable detectio
Read more...Cleaning solutions for optical sensors Endress+Hauser South Africa
Sensors & Transducers
Achieving accurate and continuous process visibility requires reliable sensor performance, even in challenging media. Endress+Hauser’s CYR51 mechanical cleaning unit addresses these challenges by providing stable, automated cleaning of turbidity and UV-Vis absorption sensors.
Read more...Next-generation gas meter module
Sensors & Transducers
Sensirion has launched its new gas meter module combining a low-power consumption mode, future-ready compatibility and seamless integration, all within the same compact form factor.
Read more...Food safety – a matter of weight
Sensors & Transducers
Weighing systems play a key role in ensuring product quality in food production, complying with legal requirements and avoiding product recalls. The Minebea Intec MiNexx portfolio has been specially developed to meet these requirements.
Read more...Telco sensors in the paper and pulp industry Gail Norton Instrumentation
Sensors & Transducers
The paper and pulp industry poses a major problem for most photoelectric sensors. Telco Sensors has overcome this with its powerful and high-performance photoelectric sensors, ensuring penetration of thick and harsh pollution while guaranteeing reliable detection.
Read more...Leaders in sensor technology Gail Norton Instrumentation
Sensors & Transducers
A new addition to the Telco Sensors range is the adjustable Proximity sensor, with a range up to 5 metres.
Read more...Cutting-edge sensor technology Endress+Hauser South Africa
Sensors & Transducers
The advantage of Endress+Hauser’s Memosens technology is that digitised measured values and sensor information are transmitted via a non-contact connection from the sensor to the cable, and as a digital signal to the transmitter.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version