Maintenance, Test & Measurement, Calibration


Adaptive shaft alignment with the new tool Fixturlaser EVO

July 2014 Maintenance, Test & Measurement, Calibration

Fixturlaser has developed a new shaft alignment tool, Fixturlaser EVO, which features a unique adaptive user interface. The tool’s simplicity in its handling is characteristic for all Fixturlaser tools; an alignment tool that can be handled by all maintenance professionals, and not only experts.

The Fixturlaser EVO is an all-digital shaft alignment tool with wireless, built-in Bluetooth in the sensor units. The units are also fitted with a 30 mm CCD detector that gives the user an unparalleled measurement accuracy and precision. The system offers a compact display unit with a 125 mm colour touch screen. It is slim and balanced, allowing it to be held in one hand, leaving the other free to touch the screen icons and rotate the sensors on the shafts.

The adaptive interface shows how much a misaligned machine requires for the vertical move by adding or removing shims at the machine’s feet. Proceeding with the measurement, it requires no re-measurements in between vertical and horizontal adjustment during the alignment process. The horizontal adjustment is promptly carried out with real values displayed during the entire process.

For more information contact Samantha Joubert, SKF South Africa, +27 (0)11 821 3602, samantha.joubert@skf.com, www.skf.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Ore sampling like never before
July 2020 , Maintenance, Test & Measurement, Calibration
With the general decline in ore grades in mining, FLSmidth’s market-leading expertise in mineral sampling and laboratory automation holds increasing value to mines. “The more you understand about ...

Read more...
Closed panel electrical inspection
July 2020, R&C Instrumentation , Maintenance, Test & Measurement, Calibration
When electrical distribution equipment fails, the results can be catastrophic to a company as workplace injuries and fatalities could occur. A company’s profit margin can be negatively impacted by unscheduled ...

Read more...
Speedy valve testing
June 2020, Comtest , Maintenance, Test & Measurement, Calibration
Control valve testing has often meant using complicated testers that require extensive training, the removal of the valve, and often one to two hours of test time on the bench. Comtest now offers Fluke’s ...

Read more...
Visual inspection made easy with SKF stroboscopes
June 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
A range of handheld, easy-to-use stroboscopes that enable the visual inspection of rotating equipment to be carried out in an economic and timely fashion has been unveiled by SKF. “All rotating equipment ...

Read more...
Essential monitoring solutions
June 2020, Extech Safety Systems , Maintenance, Test & Measurement, Calibration
Meteor Communications’ MCE-MRC-EX is powered by MeteorCloud, a one-stop end user application for complete data visualisation, outstation device control and reporting activities. The remote monitoring ...

Read more...
Taking sampling to new heights
June 2020 , Maintenance, Test & Measurement, Calibration
With the general decline in ore grades in mining, FLSmidth’s market-leading expertise in mineral sampling and laboratory automation holds increasing value to mines. “The more you understand about ...

Read more...
Wireless detection of erosion corrosion
June 2020, Emerson Automation Solutions , Maintenance, Test & Measurement, Calibration
While many forms of corrosion can be anticipated depending on the presence of corrosion causing factors such as H2S, water injection and oxygen in dry pipelines, erosion caused as a result of sand or ...

Read more...
Measure bearing vibration and temperature
June 2020, Comtest , Maintenance, Test & Measurement, Calibration
Vibration in rotating machinery is merely the back and forth movement, or oscillation, of a machine and components, such as drive motors, driven devices (pumps, compressors, etc.), and the bearings, shafts, ...

Read more...
Bently Nevada’s condition monitoring and protection system
June 2020 , Maintenance, Test & Measurement, Calibration
Why Orbit 60? Why Now? Bently Nevada prides itself on a history of machine protection and condition monitoring solutions. With over 60 years of innovation, over 100 000 rack monitoring systems, and ...

Read more...
C-Gap replaces current methods of CSS measurement
June 2020 , Maintenance, Test & Measurement, Calibration
Developed by Mintap, based in Perth, Western Australia, the Closed Side Setting (CSS) measurement device – the C-Gap – is now available through South African-based Control Systems Rustenburg. C-Gap offers ...

Read more...