Tag level switches are designed to detect the presence of different materials accrued in the surroundings of the electrode’s position. Materials can be any fluids, semi-fluids, powders and granules, conductive or non-conductive, grains, powders, plastic raw materials, oils and water. The electrode can be installed in free air or closed vessels. Vessels may be metallic or non-metallic pipes or reservoirs. Any material adhering to it does not affect the function of the sensing unit.
Some of the principals on which the Tag units function are changes of RF current and voltage, loss of energy and changes of dielectric constant versus air (disregarding capacity). RF is transferred from the feeler through the mass of the material to ground point of the sensing unit. This causes RF energy losses. The variations of RF current are transformed to DC and thus reach the control box. The amplifier in the control box activates the relay which incorporates dry contacts. The set will continue to work properly even if the feeler is totally covered by material.
After initial fitting of the unit, no further adjustment is required. The Tag level switches do not require maintenance and offer a truly fit-and-forget solution.
Meeting the challenges of tank obstructions interfering with radar
Level Measurement & Control
One of the most challenging applications for non-contacting radar level transmitters is measuring level in tanks with internal obstructions, such as agitators, heating coils, pipes, ladders or baffles. Rosemount non-contacting radar level transmitters from Emerson feature an advanced solution that enables accurate and reliable level measurements in tanks with obstructions.
Read more...Leaders in sensor technology Gail Norton Instrumentation
Sensors & Transducers
Photoelectric eyes have always needed perfect working conditions, but in the workplace there is no such thing. Steam, water, light and dirt interfere with most photoelectric eyes, but never with a Telco sensor.
Read more...A fresh approach to dairy processing VEGA Controls SA
Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.
Read more...Simple and efficient level measurement in the mining, minerals and metals industries Endress+Hauser South Africa
Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.
Read more...Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter
Read more...Powering sub-Saharan Africa’s energy future VEGA Controls SA
Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.
Read more...Telco sensors in the pulp and paper industry Gail Norton Instrumentation
Sensors & Transducers
The pulp and paper industry poses a major problem for most photoelectric sensors. The high level of contamination in these dusty, dirty and grimy environments makes it impossible for most competing sensors to operate and sense reliably and efficiently.
Read more...Level measurement of leachate from sewage sludge humification KROHNE
Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.
Read more...Groundbreaking measurement system Mecosa
Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.