BeanAir’s BeanDevice TH is a wireless temperature/humidity sensor for application in medical laboratories, technical building management, process monitoring, meteorology and the transport industry.
The BeanDevice TH integrates an embedded data-logger, which can be used to log data when a wireless sensor network cannot be easily deployed on site. All data acquisition is stored on an embedded flash and then transmitted to the BeanGateway when a wireless sensor network is established.
An example application in technical building management is as follows:
1. The device is wall-mounted as a standalone unit without needing to connect to the BeanGateway.
2. Once connected, each temperature/humidity measurement is recorded on the embedded flash.
3. When needed, a technician working on the site can send a request for a log transmission and log sending commences. If all the logs are successfully transmitted to the Bean-Gateway, the flash memory is erased and new logs will be recorded.
Remote configuration and monitoring is possible in three modes (low duty cycle data acquisition mode, alarm mode and survey mode). The data-logger feature is compatible with all these data acquisition modes.
The temperature sensor (PT1000) and humidity sensor (capacitive technology) has a measurement range of between -25 to +85°C and a humidity range of 0-100% RH. It boasts ultra-low power consumption technology (<13 μA in idle mode) and has a maximum radio range of 1 km (LOS). It can record up to 1 000 000 data acquisition records (with events dating) and features plug-and-play installation, obviating the set-up calibration on the temperature/humidity sensor. The temperature probe is watertight ensuring installation flexibility and measurement stability.
Groundwater level measurement using LoRa module Instrotech
Level Measurement & Control
Monitoring groundwater levels across large industrial sites is critical. Salzgitter Digital Solution was tasked with developing a fully automated and digital monitoring system using Long Range Wide Area Network technology.
Read more...Infrared solutions for glass manufacturing challenges Instrotech
Temperature Measurement
In the glass industry, infrared temperature monitoring is crucial for maintaining product quality and process efficiency. Instrotech has infrared sensors and cameras which provide non-contact temperature measurements, making them ideal for these high-temperature environments.
Read more...Senix sensors provide flood warnings Instrotech
Flow Measurement & Control
To create the world’s most sophisticated flood monitoring and forecasting system, the US State of Iowa’s Flood Centre (IFC) uses more than 200 Senix ToughSonic 30 and ToughSonic 50 ultrasonic sensors to measure water levels in streams across the state.
Read more...Sensors measure palm oil tank level Instrotech
Level Measurement & Control
The Senix ToughSonic 30 accurately measures and monitors the level of palm oil in large tanks approximately nine metres in height.
Read more...How one manufacturer gained live inventory control Rockwell Automation
Data Acquisition & Telemetry
A metal forming company that provides laser blanking, press brake forming, welding and powder coating to OEMs recognised the need for a more advanced ERP system after relying on the same solution for over 15 years.
Read more...The critical role of temperature measurement in flame hardening Instrotech
Temperature Measurement
Flame hardening is a heat treatment process widely used on parts made from mild steels, alloy steels, medium carbon steels and cast iron. Accurate temperature measurement is not just important, but critical for the success of flame hardening.
Read more...Noncontact infrared temperature control in aluminium rolling process Instrotech
Temperature Measurement
The aluminium rolling process is critical to the aluminium manufacturing industry, where precise temperature measurement is essential for ensuring high-quality product output and protecting equipment. The Optris long-wavelength camera can accurately measure strip temperatures in cold rolling and coiling applications.
Read more...Rotary atomisers for efficient paint spraying Instrotech
Sensors & Transducers
Painting the bodywork is an integral component of vehicle manufacturing. Keller supplied intrinsically safe pressure transmitters and intrinsically safe temperature sensors to a client producing paint robots for the car industry.
Read more...Quality process control instrumentation Instrotech
Temperature Measurement
Instrotech is a leading provider of high-quality process control instrumentation and industrial automation solutions that are designed to optimise efficiency, reliability and safety across industries.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version