July 2012Maintenance, Test & Measurement, Calibration
MTL Instruments has announced the release of the 9400 series intrinsically safe (IS) Ethernet range and the launch of an enhanced power supply, 9491-IS, which incorporates MTL’s patented Fast-Switch technology.
The deployment of Ethernet into process automation has long been hindered by the hazardous area classification in which the end device is often installed. Consequently the majority of industrial Ethernet installations have been in the factory automation environment. Additionally, in process automation it is preferred to use a single cable, providing power and communications to the end device. The 9400 Series delivers Intrinsically Safe ‘Power over Ethernet’ (PoEx), allowing live connection and disconnection of the end device in Zone 0 and Zone 1 hazardous areas, typically reducing the cost of installing the LAN in hazardous areas by 40%.
The 9400 series comprises a wireless LAN access point, managed Ethernet switch, copper to fibre media converter and serial gateway, all certified to be mounted in a Zone 1 hazardous area with connectivity into Zone 0. Additionally, Zone 2 mounting IS Ethernet isolator and associated IS power supply complete the product range. The 9491-IS power supply uses MTL’s patented Fast-Switch technology to allow live power connection/disconnection without the need for a gas clearance certificate.
The gateway gives legacy IS equipment Ethernet connectivity by allowing conventional serial communication port equipment to be connected to an Ethernet network. This enables easy integration of a wide range of IS serial measurement devices including analysers, weighing systems, dust monitors, displays, I/O etc. into today’s control systems.
The IS wireless LAN product is a multi-functional module that can be used as an 802.11a/b/g/h access point, wireless bridge or wireless repeater. This provides hazardous area infrastructure for the mobile operator using IS PDAs anywhere on the process plant. The IS-managed Ethernet switch allows the interconnection of intrinsically safe Ethernet networking components via its five ports. The Ethernet switch can also distribute power to compatible devices connected to each of its five ports, thus providing IS PoE via the RJ45 Cat5e cables. The fibre optic media converter allows an Ethernet network to be extended over a greater distance.
This technology has been proven in use in many mining applications and with the new ATEX and IECEx certification the 9400 series delivers the same benefits for all process industries. The 9460 series has South African IA certification as required by ARP0108:2007.
Infrared thermometers for electrical, industrial and HVAC applications Comtest
Maintenance, Test & Measurement, Calibration
: Comtest, distributor of Fluke test and measurement equipment, explains how handheld infrared thermometers are transforming maintenance in electrical, industrial and HVAC environments, with three measurement strategies and a wide range of practical applications.
Read more...Reverse-engineering legacy industrial gearbox parts
Maintenance, Test & Measurement, Calibration
WEG Africa’s turbine workshop uses 3D scanning technology to reverse-engineer components for legacy gearboxes, turbines and compressors, enabling equipment to run for decades after OEM support and spare parts have dried up.
Read more...Unlocking ICCP remote monitoring Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Cathodic protection keeps buried and submerged pipelines safe from corrosion, but verifying it traditionally means costly, hazardous manual site visits. Omniflex explains how a retrofit module brings remote monitoring to ageing transformer rectifiers without replacing functional infrastructure.
Read more...Microdieseling – the explosions you never hear
Maintenance, Test & Measurement, Calibration
Microdieseling is a pressure-induced thermal degradation mechanism in which entrained air bubbles are compressed so rapidly that the surrounding oil ignites, producing soot, varnish and sludge. WearCheck explains how it happens, why the damage varies, and how oil analysis detects it.
Read more...Electrostatic spark discharge – when static strikes back Wearcheck
Maintenance, Test & Measurement, Calibration
WearCheck technical manager, Steven Lumley explains how static electricity accumulates in modern low-conductivity lubricants, why compact system designs and fine filtration make ESD more likely, and how to recognise the degradation it leaves behind.
Read more...High-speed cameras for crash testing Horne Technologies
Maintenance, Test & Measurement, Calibration
Vision Research has expanded its Phantom C-series with two cameras optimised for crash and safety testing, offering 4 and 8 megapixel sensors rated to 170G, up to 1180 frames per second, and Phantom Academy application training planned for South Africa next year.
Read more...SKF extends remanufacturing expertise to bearing clearance modification SKF South Africa
Maintenance, Test & Measurement, Calibration
Using its clearance modification expertise, SKF helped a mining equipment OEM salvage spherical roller bearing inventory that would otherwise have been scrapped, confirming a new capability within its remanufacturing services and avoiding redundant procurement.
Read more...When maintenance-system compliance starts replacing plant reliability Wearcheck
Maintenance, Test & Measurement, Calibration
WearCheck ARC division manager, Annemie Willer argues that the greatest threat to effective maintenance is no longer a lack of technology, but the gradual replacement of technical judgement by CMMS compliance, leaving no one owning the machine.
Read more...Nitration: the acid you didn’t see coming Wearcheck
Maintenance, Test & Measurement, Calibration
Nitration is as destructive as oxidation in many engines but far less understood. WearCheck technical manager, Steven Lumley explains how nitrogen oxide gases degrade lubricants, why the process is difficult to detect, and what oil analysis can reveal before damage occurs.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version