News


The unseen crisis in our taps

October 2025 News

South Africa’s water crisis is no longer looming. It is already here. Ageing infrastructure, rising pollution levels and increasing demand are converging to create a national emergency. Clean, safe water is critical not just for public health, but for economic development and social stability.

Infrastructure and quality in crisis

Many South Africans still believe tap water is safe to drink. Yet, according to the Department of Water and Sanitation’s 2023 Blue Drop Report, only 14% of the country’s water supply systems consistently meet good quality standards. This means that nearly one in two municipalities supply water that could pose a serious health risk. The picture is equally troubling on the wastewater side, with the Green Drop Report revealing that 64% of wastewater treatment plants are classified as high or critical risk. Untreated effluent is entering rivers and dams, contaminating vital water sources and placing more pressure on drinking water systems.

Some provinces are worse off than others. In Mpumalanga and the Northern Cape, over 60% of audited water systems fail microbiological and chemical compliance tests. This means a glass of water from the tap in these areas could carry an acute health risk, as many municipalities simply do not have the capacity to meet rising demand. This is especially the case in fast-growing areas like the North Coast of KwaZulu-Natal and parts of Gauteng.


Robert Erasmus, managing director at Sanitech.

Why decentralised treatment is becoming essential

As infrastructure crumbles and population patterns shift, decentralised water treatment is emerging as a vital solution. In areas where municipal systems cannot support new developments, private developers are already being forced to build their own water and wastewater treatment plants. These systems can range from small-scale units for individual homes to plants that service thousands of households.

Decentralised treatment is not only a response to infrastructure gaps; it is also a form of risk management. Businesses and homeowners increasingly need to treat water on site to ensure safety, especially in regions where municipal quality is unreliable. Post-meter solutions such as filtration, UV treatment or chemical dosing can help remove contaminants that pose a health risk.

At the same time, innovation in wastewater recycling and greywater reuse is gaining momentum. For many companies, this is not just about necessity. It is also an Environmental, Social and Governance (ESG) consideration. Reducing water consumption and recycling waste streams are increasingly seen as part of responsible business practice.

Skills matter as much as systems

Technology and infrastructure alone are not enough. South Africa’s water crisis is also a human capacity issue. According to the Blue Drop Report, over 50% of plants lack properly skilled technical operators. This shortfall in expertise is one of the primary reasons many facilities are failing to meet basic water quality standards.

The technical management score across all provinces sits at just 35,8%. Four out of nine provinces are rated as critical in this area. Simply put, the country’s water systems are underperforming not only because they are old, but because they are often poorly managed.

Upskilling plant operators and improving technical management must become a national priority. Without this, new systems and upgrades will not deliver the results needed to protect communities and businesses.

An urgent call to action

While long-term infrastructure investment is essential, there are practical, scalable interventions that can make an immediate difference:

• Invest in decentralised plants to supplement or replace failing municipal systems in high-risk areas.

• Support post-meter treatment so that homes and workplaces can access clean water, even when municipal systems fall short.

• Streamline water-use approvals to fast-track projects in areas facing immediate supply challenges.

• Improve operator training and technical oversight to lift compliance and performance.

• Encourage public-private partnerships to unlock funding and drive innovation.

Policy must also play a critical role. Here, red tape must be reduced to allow faster implementation of solutions. Particularly, water-use licences and infrastructure approvals should not take months when communities are already at risk.

South Africa’s water systems are moving in the wrong direction. The latest reports show a decline in performance with more municipalities falling into a critical condition. Turning this around will require urgency, collaboration and a shared commitment to safeguarding the country’s water future.

For more information contact Robert Erasmus, Sanitech, [email protected], www.sanitech.co.za




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Powering Africa’s industrial Leap at the 2026 Manufacturing Indaba
News
The 2026 Manufacturing Indaba is set to bring together stakeholders to explore how reliable energy can unlock Africa’s industrial future

Read more...
Siemens andDucati extend partnership to advance innovation in MotoGP
News
Siemens Digital Industries Software has renewed its technical partnership agreement with Ducati, and detailed how the Siemens Xcelerator platform has been instrumental in helping the company to create increasingly powerful, safe and sustainable motorcycles.

Read more...
Your chance to make a difference by supporting UKZN’s SMART Lab research
News
UKZN’s SMART Lab is at the forefront of tackling international challenges through innovative, multidisciplinary solutions, and focuses on research that makes a tangible difference to society. Companies affiliated with the SAIMC now have an opportunity to make a meaningful impact through sponsorships.

Read more...
Hitachi Energy named world’s leading supplier of grid automation products and services
News
Hitachi Energy has been recognised as the global market share leader in grid automation for electric power transmission and distribution utilities by ARC Advisory Group.

Read more...
Latest evolution in DesignSpark PCB design software
RS South Africa News
RS South Africa has announced the local availability of DesignSpark PCB version 13, the latest evolution of its award-winning PCB design software.

Read more...
SKF earns top CDP ratings, reinforcing climate leadership
SKF South Africa News
SKF has been awarded an A score in the 2024 CDP Supplier Engagement Assessment, placing the company among the global leaders in supplier climate action and transparency.

Read more...
South African project to tackle e-waste
News
Every year millions of electrical and electronic devices and appliances are thrown away. This e-waste can become a threat to both health and the environment if they are not disposed of and recycled properly. Limpopo recently launched its E-Waste for Youth Employment in Limpopo Province project in order to change this narrative.

Read more...
Hans Beckhoff receives German Mechanical Engineering Award
Beckhoff Automation News
Hans Beckhoff has received the 2025 German Mechanical Engineering Award. This prestigious award honours entrepreneurs who have set standards in machine and system engineering, driven innovation, and taken on social responsibility.

Read more...
Safe solar light for 150 000 people across Africa
RS South Africa News
RS Group has announced a partnership with international development charity, SolarAid to deliver clean, safe solar lights to 150 000 people living in rural communities across Africa without access to electricity.

Read more...
Regalvanising is a cornerstone of the circular economy
News
Steel can be regalvanised three to four times, effectively doubling the lifespan of key infrastructure for 30% of the replacement cost. That is why the Hot Dip Galvanisers Association of South Africa sees regalvanising as a cornerstone of the circular economy.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved