South African companies are gearing up for the new Minimum Energy Performance Standards (MEPS), part of a global trend towards energy-efficient electric motors. Starting in June 2025, the regulation will require most three-phase, low-voltage electric motors in South Africa to eventually switch to IE3 (International Efficiency) motors, which are more efficient than IE1 and IE2-rated motors.
This switch brings efficiency and cost benefits to businesses, suppliers and original equipment manufacturers. Leading industrial and energy component manufacturer, WEG Africa recently hosted a media briefing at its training centre in Johannesburg, to unpack the motivations, benefits and requirements for MEPS.
A financial win for businesses
According to the International Energy Agency (IEA), electric motor-driven systems consume more than 40% of global electricity, which new regulations can reduce by at least 5%. Electric motors can consume energy equivalent to their acquisition costs in the first few weeks of operation.
The difference in energy efficiency between IE1 and IE3 motors is four to eight percent. When comparing cumulative running costs, IE3 savings typically return investments within one to five years. Premium IE3 motors that run continuously can recoup their costs in months. IE3 motors also radically improve a company’s environmental impact and market competitiveness, as well as offset rising energy costs.
Exceptions and responsibilities
The new IE3 efficiency standard, officially the Compulsory Specification VC 9113, will be mandatory from June 2025. The specification applies to a broad range of three-phase, low-voltage electric motors, specifically motors with two, four, six or eight poles with a rated power output ranging from 0,75 to 375 kW. It includes motors with non-standard mechanical dimensions and geared motors. It excludes certain categories, such as single-speed motors with ten or more poles, multi-speed motors, motors that use mechanical commutators, and motors designed to operate entirely while immersed in a liquid.
Businesses can continue to run operational IE1 and IE2 motors, replacing these upon failure. Existing IE1 and IE2 motor stock can still be sold until May 2026. WEG Africa has already established local IE3 motor assembly lines.
In most cases, OEMs and equipment suppliers must certify their motors. End-user businesses can request to see a supplier’s letter of authority for the motors, issued by the National Regulator for Compulsory Specifications (NRCS).
Steps to align with the MEPS transition
The affected category of motors is very common, and includes industrial applications, mining, agriculture, cold chain systems and HVAC units. The MEPS transition will impact many different businesses.
Here are some steps to prepare for the transition and gain its benefits:
• Conduct a thorough electric motor inventory audit to identify accurately all motors that fall within the scope of the MEPS regulations.
• Talk to equipment suppliers to understand the impact on equipment used in operations and how the supplier will address MEPS requirements.
• Develop a comprehensive, long-term strategy for replacing older motors, prioritising those that operate for extended periods to maximise potential energy savings.
• Update procurement policies and technical specifications to mandate explicitly that all applicable new electric motor purchases must meet the IE3 efficiency.
• Train relevant staff members (including procurement, maintenance and operations) on the new MEPS regulations and compliance.
• Undertake a cost-benefit analysis for replacing older, less efficient motors even before they fail, taking into account the potential for significant energy savings and the projected increases in the cost of electricity.
Equipment suppliers and end-user businesses can also engage with WEG Africa to learn more about the new standard.
Premium slewing rings from SKF SKF South Africa
Motion Control & Drives
SKF’s slewing bearing portfolio spans standard and customised designs across a wide range of types and sizes, backed by advanced monitoring, remanufacturing services and application engineering expertise for demanding industrial applications.
Read more...World’s first fully electric hydrogen fuel cell aircraft engine
Motion Control & Drives
Airbus and MTU Aero Engines are establishing a joint venture to industrialise hydrogen-electric propulsion systems for commercial aviation, combining liquid hydrogen expertise with fuel cell development to support the ZEROe programme’s 2035 target.
Read more...Monopile handling innovations boost offshore wind farm
Motion Control & Drives
Mammoet’s XXL monopile transport system and new MTC 1600 terminal crane are helping offshore wind developers safely marshal and install ever larger monopile foundations, as demonstrated on Van Oord’s Baltic Power project.
Read more...Automation without the mega factory Yaskawa Southern Africa
Motion Control & Drives
Mid-sized South African manufacturers are turning to targeted, low-risk automation to solve specific bottlenecks rather than chasing full factory transformation, helped by retrofit-friendly robotics and advanced simulation software.
Read more...Duplex worm gears for precision backlash adjustment
Motion Control & Drives
KHK USA has introduced duplex worm gears that allow precise backlash adjustment through simple axial movement of the worm shaft, eliminating the need for gearbox housing alterations during assembly or maintenance.
Read more...Osterwalder launches multi-plate, fully electric powder press
Motion Control & Drives
Osterwalder Technology has launched the MPneo 480, a 480 kN fully electric multi-plate powder press with up to six cross-pressing modules. Designed for hard metals, ceramics and advanced engineered materials, the press supports complex geometries and offers optional
Read more...Ground helical racks for superior precision and durability
Motion Control & Drives
KHK USA has announced its ground helical rack series, engineered for smooth operation, high torque transmission and long-lasting performance in precision motion systems. The racks are designed for demanding environments such as machine tools, high-speed automation equipment and precision positioning systems.
Read more...SpinDrive launches Magma X100 active magnetic bearing controller
Motion Control & Drives
SpinDrive has launched the Magma X100, a new active magnetic bearing controller platform for applications up to 150 kW. The platform brings oil-free, frictionless bearing technology to mobile machinery, semiconductor equipment and other high-speed rotating equipment at a cost comparable to conventional bearing solutions.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version