Electrical Power & Protection


Harnessing the potential of green hydrogen

June 2024 Electrical Power & Protection

A new Danfoss Impact paper reveals that with hydrogen production set to account for more than half of today’s electricity demand by 2050, energy efficiency in its production is paramount. Decisive steps must be taken to scale its production without putting an unmanageable strain on renewable energy production or financial resources.

Danfoss calls for a nuanced approach to green hydrogen because it will play a critical role in the transition away from fossil fuels. However, more focus needs to be put on how we use and produce green hydrogen in the most efficient way. Crucially, hydrogen production should be recognised as a limited resource that must be strategically allocated to sectors that are difficult to decarbonise such as heavy industry, and long-distance transport.

“The potential of hydrogen as a clean energy carrier is immense,” said Mika Kulju, president of Danfoss Power Electronics and Drives. “But it must be produced efficiently to minimise costs, and we need to deploy it judiciously. To maximise its impact, green hydrogen should be channelled into sectors where alternatives to fossil fuels are limited, ensuring the greatest reduction in greenhouse gas emissions.”

With green hydrogen production requiring immense amounts of electricity, energy efficiency in its production is vital to its sustainability. While current green hydrogen conversion processes incur an energy loss of approximately 30%, existing technology can minimise this loss. For instance, efficient converters converting alternating current to direct current for electrolysers can increase overall production efficiency by roughly 1%. Though seemingly small, a saving of 1% of the electricity demand in 2050 for hydrogen is enough to power London for almost four years.

Hydrogen holds significant promise in the climate strategies of many countries, with substantial funding programmes underway globally. However, rapid action is necessary. To realise the goals set by the Paris Agreement, global electrolysis capacity must reach more than 550 GW by 2030. Green hydrogen production can grow massively by 2030, but cost challenges are hampering deployment.


In its latest Renewables report, the International Energy Agency (IEA) said that hydrogen-dedicated renewable energy capacity is expected to grow by 45 GW between 2022 and 2028, some 35% lower than forecast a year ago due to slow progress on real-world implementation.

“Hydrogen is no silver bullet, but we need to speed up cost-efficient, green hydrogen production because there is no doubt that hydrogen will play a crucial part in the green transition,” said Kulju.

Recovering excess heat from electrolysis is another vital energy efficiency measure. Hydrogen production creates incredible amounts of excess heat. In the EU alone, about 114 TWh can already be recovered by 2030, enough to cover Germany’s current domestic heating more than two times.

“The potential of recovering excess heat from electrolysis is so enormous that it would be a severe policy mistake not to consider it when planning future energy infrastructure. This is also why it’s so critical to set the right regulatory and economic framework for an efficient large-scale rollout of hydrogen,” added Kulju.

The new Danfoss Impact paper, ‘Green hydrogen: A critical balancing act’, presents a balanced approach to hydrogen, where efficiency and affordability play a key role.

Key takeaways of the report are:

• By 2050, hydrogen production will require more than half of today’s total electricity demand.

• Green hydrogen should be considered a limited resource and prioritised for sectors that are otherwise hard to decarbonise.

• Hydrogen currently remains concentrated in traditional applications, but a rapid upscaling in hard-to-abate sectors like heavy industry and long-distance transport is necessary.

• Green hydrogen must be produced efficiently by minimising the cost, energy loss and energy demand of its production.

Conversion of electricity to hydrogen currently creates an energy loss of roughly 30%, but there are technologies available today to reduce this loss.

To view the full Danfoss impact paper visit www.instrumentation.co.za/ex/danfoss1.pdf




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Critical power distribution for modern infrastructure
Electrical Power & Protection
Legrand has expanded its critical power portfolio with integrated solutions designed for reliable, efficient, safe and flexible power distribution in many applications, including data centres and industrial sites.

Read more...
How to use a voltage tester
Comtest Electrical Power & Protection
Voltage testers are valuable tools for professionals who work with electrical systems.This application note will guide you on how to use a voltage tester effectively, and which Fluke voltage testers can assist in a variety of settings.

Read more...
Film capacitors for noise suppression
Electrical Power & Protection
Würth Elektronik has expanded its portfolio of components for the mains input. The new series of WCAP-FTY2 film capacitors is optimised for use in noise suppression and complies with X1 or Y2 safety classes in accordance with IEC 60384-14.

Read more...
Emissions pressures are not just hot air
Electrical Power & Protection
Dennis Williams, commercial director of AES says that the South African government aims to push towards global standards in emissions, but it might be difficult for our industries to carry the financial burden. This is where AES fits in.

Read more...
ABB achieves zero operational emissions
ABB South Africa Electrical Power & Protection
ABB’s factory in Oiartzun, Spain, has reached a major sustainability milestone.

Read more...
Energy cannot be destroyed, it can only be transferred
Schneider Electric South Africa Electrical Power & Protection
Industry produces significant amounts of waste. Unfortunately, a lot of this waste is simply disposed of, usually impacting the environment. What if these byproducts could be transformed into a source of energy?

Read more...
Dual head safety pull switches with expanded cable span
Electrical Power & Protection
Referro Systems has added the latest Dual Head range of Allen-Bradley’s safety pull switches to its portfolio. It is ideal for protecting long stretches of equipment where quick access to a safety pull switch and emergency stop is vital.

Read more...
Producing solar hydrogen without platinum
Electrical Power & Protection
A research team led by Chalmers University of Technology, Sweden, has presented a new way to produce hydrogen gas without the scarce and expensive metal platinum.

Read more...
Energy-efficient perimeter cooling system for small, medium and edge applications
Electrical Power & Protection
Vertiv has enhanced the Vertiv CoolPhase Perimeter PAM air-cooled range with new ratings of cooling systems and Vertiv CoolPhase Condenser.

Read more...
High-quality DC/DC brick-type converters
Vepac Electronics Electrical Power & Protection
PowerGood’s high-quality DC/DC brick-type converters are engineered for exceptional reliability, making them the ideal power conversion solution for demanding, high-end applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved