News


Back to 2025

Technews Industry Guide: Sustainable Manufacturing 2023 News

The best available scientific assessment of climate change is the recently released Intergovernmental Panel on Climate Change (IPCC) Sixth Assessment Report (AR6). It also makes for grim reading, detailing the devastating consequences of rising greenhouse gas emissions around the world, and the increasingly dangerous and irreversible risks should we fail to change course.

UN Secretary General, Antonio Guterres called this report a “Code Red for Humanity”. The target is clear. Global warming must be limited to 1,5°, and carbon dioxide emissions must be zero by 2050 and reduced by 30 to 50% by 2030. This transition toward a net-zero economy is of momentous proportions. The pace and extent of its unfolding has simply no precedent in history: it has to happen within a time frame twice shorter than in the past, and on a global scale.

The IPCC also offers hope, highlighting pathways to avoid these intensifying risks. It identifies readily available, and highly cost-effective actions that can be undertaken now to reduce emissions and scale up carbon removal. How this can realistically be achieved is the main question, and despite a flurry of scenarios to 2050, the momentum is yet to come. Nothing has really changed yet.

This report is a contribution to this question and proposes an alternative approach. History reveals that what drives energy transitions is actually the way this energy is used and consumed. Energy transitions happen because new energy resources bring about positive changes in consumption patterns, or because new consumption patterns emerge and call for innovations in energy use. Energy supply has always chased energy demand. The only way to realise a transformation of the energy system of such magnitude is to design a transition which makes sense for the consumer, hence driving adoption rather than resistance – at an accelerated pace.

Our conclusion is clear: the best way to get to net-zero by 2050 is to modernise the economy at a rapid pace, building on innovations and behavioural changes that will support the climate change agenda. Would anyone have imagined back in 1990 that half the global population would today walk in the streets with 100 000 times the computing capacity of the guiding system that landed Apollo 11 on the Moon in 1969? How does this inform us about what to expect for 2050, when we will live in a different world. In this report, 12 key transformations are reviewed and their impact on the energy system modelled. These key transformations are all largely inevitable, as they bring considerable benefits to consumers in terms of access to services, convenience and quality of life.

The only question is the pace and the extent of their unfolding by 2050. Two scenarios are modelled:

• The scenario ‘New Normal’ essentially looks at the natural unfolding of such transformations in consumption, without further policy changes, and considering business as usual market conditions.

• The scenario ‘Back to 2050’ explores the extent to which a climate and consumer-centric policy shift can help reach the target of cutting emissions by 30 to 50% by 2030, on a course to net-zero by 2050.

The key finding of this detailed modelling is that a pathway to 1,5° is more feasible than we think. In the New Normal, we find that the economy, as it modernises, becomes less carbon intensive and decarbonises faster than often anticipated, albeit not at the right pace. By 2050, emissions in this scenario drop 30% compared to current levels.

In the Back to 2050 scenario, accelerating modernisation through a consumer-centric policy shift will help reach a net-zero economy. Final energy demand in this scenario drops 20% in industry and over 30% in mobility. The energy system electrifies, with the share of electricity climbing from 18 to 60% . Total electricity demand increases three times, and 20% of it is delivered by distributed solutions. The share of electricity reaches 80% in buildings and industry, and 40% in mobility − a different world. In 2050, there are still 5500 million tons of annual residual emissions, which are compensated by carbon capture, utilisation and storage.

If done right, a net-zero economy is achievable by 2050. It requires us to embrace the future with clear resolve. We hope that we can help steer the conversation toward the consumer side of the energy system and provide new insights to those who are building practical pathways to our common goal.

To view the full report visit www.instrumentation.co.za/ex/schneider sustainability report.pdf


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

BMG achieves GBCSA Net Zero Waste Level 2 Certification
Bearing Man Group t/a BMG News
BMG has achieved Green Building Council South Africa Net Zero Waste Level 2 Certification after diverting more than 90% of operational waste from landfill, demonstrating how practical sustainability measures can deliver measurable environmental and commercial benefits.

Read more...
Overcoming the bottling industry’s fragmented visibility
Schneider Electric South Africa IT in Manufacturing Electrical Power & Protection
Beverage bottling facilities are among manufacturing’s most energy-intensive environments, yet many still operate without granular insight into where that energy goes. Rezolia Muller-Potluri of Schneider Electric explains how tiered metering architecture and advanced

Read more...
What you need is a nerve centre for your building
Schneider Electric South Africa SCADA/HMI
Schneider Electric’s Anoop Hariparsad explains how a building management system acts as a single nerve centre, cutting energy use and improving safety and guest experience.

Read more...
Pump spares and parts for Africa
News
KSB Pumps and Valves explains how its decentralised stockholding and local manufacturing keep spares and parts available across its installed base in Africa.

Read more...
Inspiration for times of change
Endress+Hauser South Africa News
More than 2000 customers, partners and experts gathered in Basel, Switzerland, for the Endress+Hauser Global Forum in April 2026. Under the theme of driving sustainable transformation together, the event combined keynote sessions on strategy, technology and the future of work with practical case studies from across the process industry.

Read more...
Local energy solutions rewiring resilience across Africa
News Fieldbus & Industrial Networking
Engineers across Africa are developing practical, scalable energy and mobility solutions supported by the Africa Prize for Engineering Innovation.

Read more...
New chiller line for high-density AI data centres
Schneider Electric South Africa IT in Manufacturing
Schneider Electric has launched the Uniflair XCA, a new series of air-cooled and free-cooling chillers designed for artificial intelligence-driven, high-density liquid-cooled data centres.

Read more...
The gender gap in SA’s engineering sector
News
South Africa’s engineering sector is facing a critical gender imbalance, with women making up just 16% of registered engineering professionals compared to 84% of men.

Read more...
Turning system integrators into trusted technology partners
Schneider Electric South Africa IT in Manufacturing System Integration & Control Systems Design
Schneider Electric’s Alliance Partner Programme is repositioning system integrators from hardware suppliers into lifecycle-value partners. Oriel Soupen explains the competency framework, certification model and real-world results that are already helping African system integrators win higher-value, longer-term engagements.

Read more...
Schneider Electric introduces next-generation BlokSeT switchboard
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has launched its next-generation BlokSeT low-voltage switchboard in West Africa, offering high reliability, predictive maintenance capability and digital integration for critical infrastructure and industrial applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved