IS & Ex


Leading the PDS and CPS evolution in coal mining

June 2023 IS & Ex

With a strong understanding of the coal mining industry, proximity detection system (PDS) and collision prevention system (CPS) specialist Booyco Electronics continues to steer the evolution of PDS and CPS solutions that meet specific requirements for both surface and underground collieries.

“In line with the mining industry’s quest for zero harm, a stringent safety culture has held a much more prominent role in safety management in coal mines. One of the enabling factors has been the advent and increased uptake of PDS and CPS solutions, an industry where Booyco Electronics has had a leading role since its inception in 2006,” says chief sales officer, Graeme Jardine.

He explains that from the outset Booyco Electronics had a good grasp of the safety challenges faced by the coal mining industry, which informed the development of its PDS and CPS solutions. “With a solid background in coal mining, Anton Lourens, founder and CEO of the company, had a first-hand understanding of the requirements of both surface and underground coal operations,” says Jardine. “Consequently, right from the start we could develop fitting solutions from an informed position.”

Some 16 years later, coal mining remains a critical commodity area for Booyco Electronics, constituting about 25% of the company’s PDS and CPS installed base, with a formidable client base ranging from large coal mining groups to junior miners.

Informed by changing industry requirements, Booyco has evolved its offering from its first-generation technology, the Collision Warning System (CWS), to the new generation Booyco CXS system.

Based on the technology available at the time, the Booyco CWS found favour within the coal mining sector because of its reliability. Leveraging Very Low Frequency (VLF) technology, the Booyco CWS set the benchmark in the early days, especially in the underground mining environment. Use of VLF technology enabled sensors on pedestrians and on trackless mining machines (TMMs) to communicate through rock walls for optimal safety.

Fast forward to 2022, and the latest generation Booyco CXS consolidates the learning of the past 16 years, leveraging technology to achieve new levels of safety in both underground and surface mining environments. It is a best-of-breed system providing a comprehensive and integrated response to Level 7, Level 8 and Level 9 requirements, as stipulated by Earth Moving Equipment Safety Round Table (EMESRT).

“Over the years, the technology has evolved from simply a PDS solution to incorporating many other functions, such as tracking and data management. In addition to the safety capabilities, our solutions are now able to provide customers with the bigger operational picture, which includes information such as machine standing time, idling times, and cycles times,” says Jardine.

A key differentiator is the intrinsically safe nature of the Booyco Electronics solution, which bodes well for the coal mining environment. Due to the presence of flammable gases, coal mines – especially underground operations – are susceptible to explosions. One spark and a split second are all that it takes for disaster to happen. The common industry alternative to an intrinsically safe solution is for suppliers to supply a flameproof enclosure to house the PDS, which tends to be expensive, heavy and impractical.

“Because they are intrinsically safe, our products are designed within specific system specification to allow them to be deployed in hazardous areas such as coal mining,” explains Jardine. “Typical benefits of this approach, compared to flameproof enclosures, include cost savings in installation and maintenance of the equipment.”

In addition, Booyco Electronics is one of a few companies that can offer PDS and CPS solutions for both surface and underground environments. “Some of our competitors focus on either underground or surface. By contrast, our solutions and system architecture are by design suited to all facets of coal mining, making us a one-stop provider for operations with both surface and underground environments,” he says.

Every product is as good as its support, stresses Jardine, who firmly believes that the relationship between the supplier and the customer is key to the success of any PDS installation. A key enabler is the company’s strong support footprint in the coal mining regions of South Africa. Its fully-fledged branch in Witbank supports the Mpumalanga coalfields, while the Richards Bay branch looks after the Vryheid/Newcastle coal mines. Each branch has a large aftermarket team of technically skilled and competent field staff, assisting customers to optimise uptime and productivity.

“We pride ourselves on the fact that of our 330 employees, 190 are technicians, which speaks to our commitment to provide unparalleled aftermarket support to customers. It also enforces our partnership approach to all our PDS installations because we have the technical means to ensure hassle-free operation for our customers,” he concludes.




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Fully Ex-certified access point solutions for wireless communication
Pepperl+Fuchs IS & Ex
Pepperl+Fuchs now offers a wireless access point solution that is fully certified in accordance with ATEX/IECEx standards, and forms the basis for end-to-end Wi-Fi communication in hazardous areas.

Read more...
Secure, digital communication in potentially explosive atmospheres
Pepperl+Fuchs IS & Ex
Consistently digitalised processes in the smart factory are a matter of course today, but not in potentially explosive atmospheres. The systems and devices used in these areas must have optimal protection mechanisms to ensure maximum safety.

Read more...
Functional and compatible intrinsically safe loop approvals
Extech Safety Systems IS & Ex
With all the focus on IS loop approval, it is easy to forget to check that the loop will function correctly to see whether the field device has sufficient power (voltage & current) to operate over the full process range.

Read more...
Upgrade your legacy alarm units
Omniflex Remote Monitoring Specialists IS & Ex
Darren Barratt, sales manager at alarm annunciator specialist Omniflex, explains the drawbacks of leaving outdated rack-based alarm annunciator systems in place, and why an upgrade might be simpler than you would expect.

Read more...
Cathodic protection system for hazardous environments
Omniflex Remote Monitoring Specialists IS & Ex
When NSW Ports in Australia embarked on a two-year programme to rehabilitate the structures and combat corrosion levels at its Bulk Liquid Berth 1, it commissioned Melbourne-based consultancy Infracorr to deliver a bespoke cathodic protection) system. To deliver the system safely, Infraccor engaged cathodic protection specialist Omniflex to support the hazardous area and remote monitoring aspects of the CP system design.

Read more...
Leading the way in PDS technology
IS & Ex
Booyco Electronics, an original equipment manufacturer specialising in mine safety equipment, has witnessed a surge in demand for its proximity detection systems (PDS) and collision prevention systems (CPS) since the Mine Health and Safety regulation focusing on trackless mobile machinery was promulgated. These systems offer crucial vehicle-to-pedestrian and vehicle-to-vehicle detection capabilities.

Read more...
Ensuring lone worker safety
IS & Ex
The Conextivity Group’s startup – Wearin’ – has developed a solution connecting the lone worker with the control centre. This was commissioned by concrete producer, Pro Beton to ensure the safety of its teams of machine operators and cleaners working on production sites during the day, night, and weekends.

Read more...
Safety breakthrough in live testing of large equipment
IS & Ex
While essential to effective maintenance, the live testing of mining vehicles and equipment can be hazardous and time consuming; but this has all changed with the SafeGauge range of digital testing systems. Developed in Australia, SafeGauge is now distributed in South Africa by Booyco Electronics, known for its leading role in promoting safety on mines through its proximity detection systems.

Read more...
Explosion-protected control units
Pepperl+Fuchs IS & Ex
The new range of control units from Pepperl+Fuchs offers a clever solution for switching and controlling circuits in hazardous areas that are designated ATEX/IECEx Zones 1/21 and 2/22.

Read more...
The importance of understanding SIL ratings
Omniflex Remote Monitoring Specialists IS & Ex
Major industrial accidents around the world, like the Bhopal chemical plant disaster, have occurred due to insufficient and poorly designed safety systems. Gary Bradshaw, director of alarm and safety system specialist Omniflex, explains how SIL ratings work and the dangers of the misconceptions that exist around them.

Read more...