Because filtration is the only effective defence against wear and tear when contaminants are present, it is critical that effective filter components are used to ensure dependable performance, high efficiency and extended service life of machinery and vehicles. “Without a structured control and contamination prevention programme, premature equipment failure is likely to occur, resulting in unnecessary downtime and costly replacement of parts,” explains BMG product specialist, Hanli Schutte. “BMG Fluid Technology’s filtration solutions comprise a wide range of fluid power components and systems, supported by the team’s broad technical capabilities, to ensure fluids − including oil, fuel and lubricant oil − operate within the required cleanliness standards.”
BMG’s premium filtration partner, Filtration Group, manufactures advanced filters that ensure that the fluid in the circuit of the process meets the required cleanliness class. Design and materials used for the construction of filter housings and elements exceed industry standards and through the latest technologies, like PulseShield and e-protect, the dirt holding capacity of filter systems is increased to ensure full functionality, even in the most challenging environments and applications.
Filtration Group’s product portfolio comprises desiccant breathers, which are designed to replace conventional dust caps or breathers of equipment like hydraulic units, where there are high humidity and temperature fluctuations. With this highly efficient filtration system, contaminated air passes through layered filter media, which blocks particles from entering the breather. A bed of silica gel absorbs any moisture in the air to keep equipment dry. This technology prevents problems associated with condensation, ageing of hydraulic oils, degradation of additives, and corrosion.
Within a hydraulic system there are typically four locations where filters are required: suction line, return line, pressure line, and reservoir breathers. Suction filters are designed to remove large particles that accumulate within the hydraulic fluid reservoir, while safety filters can be positioned inside the reservoir or outside the reservoir on the suction side of the pump. The objective of return line filters is to remove contaminants from the hydraulic fluid before it is returned to the reservoir. Pressure line filters – also known as point of use filters − remove fine particles before application and can withstand high operating pressures and temperatures. Breathers on reservoirs protect the hydraulic system from environmental contaminants like dust and moisture. An important feature of Filtration Group filter elements is that they are fully compatible with housings of other filter manufacturers and increase the efficiency of the installed filtration system.
Through the acquisition of OMSA in 2013, BMG extended its services into the filtration sector. BMG’s OMSA ECOspin-on elements enable fast and convenient protection for the offloading and dispensing of bulk fuel. This range includes fuel and water separating filter elements for 6 micron and 3 micron particle removal. These filters are used extensively in BMG’s custom-designed offloading and dispensing filtration systems.
In addition to the design and manufacture of new bulk fuel systems for oil and lubrication purification, BMG’s technically skilled team offers a refurbishment service for existing systems. Typical applications are in machine tools, mining, power generation, sugar, pulp and paper, cement, marine, and hydraulic industrial equipment.
These systems are designed and manufactured to exact customer specifications and generally include all mechanical, electrical and pneumatics as required. Bulk fuel systems can be designed as permanent in-line or off-line systems, as well as portable systems that can be used in multiple applications.
In order to provide customers with continuous contaminate-free fuels and lubrication solutions, BMG’s Field Services department offers services that include the inspection, service and maintenance of bulk fuel and hydraulic systems. Oil analysis is conducted by BMG’s qualified tribologist, to ensure the required cleanliness of oils and fuel.
BMG’s fluid technology services include solutions for fuel and industrial filtration systems, hydraulics and pneumatics, lubrication, hydraulic hose and fittings, and instrumentation, pumps and industrial valves. Through its specialist skills and dependable stockholding of components, BMG is able to meet high demand from customers for dependable filtrations services throughout the African continent.
Smarter motor technology for high-performance industrial automation Adroit Technologies
Motion Control & Drives
Adroit Technologies is bringing Mitsubishi Electric’s EM-A series permanent magnet motors to Africa, offering servo-like speed and position control at a lower cost by combining patented sensorless control with the FR-E800 inverter to eliminate encoders while achieving IE5 efficiency.
Read more...A smarter approach to simplifying motion architecture
Motion Control & Drives
n motion system design, the wiring and drive placement between motor and drive are often decided by default, yet they shape a machine’s cost, footprint and adaptability. Kollmorgen sets out how single-cable and decentralised architectures simplify the cabinet.
Read more...Robotic case packer achieves 99% uptime Rockwell Automation
Motion Control & Drives
DCC Automation designed a new robotic case packer for a nutrition supplement manufacturer using delta robots and a unified Rockwell Automation control platform, cutting changeover time from 45 minutes to 5 minutes, and achieving 99 to 99,5% uptime against the previous 10% per-shift downtime.
Read more...Electrically operated, energy-efficient double diaphragm pumps Bearing Man Group t/a BMG
Pneumatics & Hydraulics
BMG has introduced the EVO series 210 electric double diaphragm pump range from ARO, offering lower energy consumption and quieter operation than air-operated alternatives, with access from one side for both diaphragms, and optional electronic leak detection for critical applications.
Read more...igus puts 3D-printed wear materials to the test igus
Motion Control & Drives
A new igus white paper compares its tribological iglidur 3D-printing materials directly with conventional POM, reporting lower wear, more stable friction and up to ten times longer service life in gear testing for customised, low-volume and replacement components.
Read more...SEW-EURODRIVE’s expanded local engineering capability SEW-EURODRIVE
Editor's Choice Motion Control & Drives
At Electra Mining Africa, SEW-EURODRIVE demonstrated how its expanded local engineering capability, digital technologies and lifecycle support strategy help customers improve reliability, energy efficiency and total cost of ownership across the full life of their drive assets.
Read more...Latest Danfoss automation drive Bearing Man Group t/a BMG
Motion Control & Drives
BMG has launched the Danfoss iC7-Automation enclosed variable speed drive range in South Africa, backed by significant local stockholding of 400 V models up to 710 kW, approved warranty workshops, and DrivePro digital asset management support.
Read more...Severe-duty workhorses powering mining
Motion Control & Drives
Mining machines such as rock crushers, pumps and conveyors need motors that combine high torque with robust enclosures, seals and cooling. WEG Africa explains how severe-duty motors deliver more than a decade of reliable performance in harsh conditions while meeting modern energy-efficiency standards.
Read more...BMG integrates conveyor drive technology to improve mining reliability and availability Bearing Man Group t/a BMG
Editor's Choice
BMG supplies engineered turnkey drive packages for belt conveyors and feeders in mining and bulk materials handling, bringing the motor, drive, couplings, gearbox, lubrication and condition monitoring together as one integrated system to protect conveyor availability.
Read more...Looking beyond the spec sheet when choosing motion architecture
Motion Control & Drives
When machine builders focus only on torque, speed and price, engineering time, integration effort and long-term maintainability get overlooked. Kollmorgen explains how thinking at the system level, not the component level, leads to better motion architecture choices.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version