News


Record-seeking sailboat uses Fischer Connectors for sensor data transmission

February 2022 News

The carbon-fibre SP80 boat looks like a Formula 1 car combined with a fighter jet, designed specially to glide on the water, featuring a super-ventilating triangular hydrofoil and towed by a huge kite wing. “Several projects are in the running to break the long-standing world sailing speed record,” says Mayeul van den Broek, CEO of the SP80 startup based in Renens near Lausanne, Switzerland and created in 2019 by a team of engineers and students from the Swiss Federal Institute of Technology in Lausanne (EPFL).

The boat is setting out to reach a speed of 80 knots (148,16 km/h) powered only by the wind and thereby break the long-standing world sailing speed record of 65,45 knots (121,21 km/h) set in 2012.


“This technological adventure is fascinating, as we’re confronted with extremely challenging physical laws. That’s why our international team of nearly 50 people, some of whom are now finalising the innovative design of our boat which is being built in Persico Marine’s shipyard in Italy, is anxious to get the very best in terms of data transmission performance and reliability. These technical requirements are crucial when it comes to interconnecting the various sensors with which our boat and its pilot will be equipped during the launch and the boat’s enhancement runs scheduled for the end of the year and the record-breaking event scheduled for next year.”

The data collected by the multiple sensors and loggers monitoring the boat’s structure and the pilot’s performance will be transferred through the connectors, associated cables and electronic solutions of Fischer Connectors, the Swiss-headquartered supplier of high-performance connectivity solutions that are world-renowned for their ruggedness and resistance to demanding operating conditions such as marine and underwater, defence and security, medical and test and measurement.

“The technology partnership with Fischer Connectors is a logical step forward in our record-breaking ambition,” explains van den Broek. “The innovations we’re putting in place to enhance our boat’s aerodynamics above water and minimise the friction of its hull and foil under water need to be monitored during the boat’s development phase as well as during the speed run itself. To ensure the efficient transfer of these monitoring data, we need a solutions provider that has not only expertise in signal integrity and data transmission and management, but also an holistic approach to electronic systems in order to provide the end-to-end connectivity solutions required for our sensing system.”

During the design phase, sensors are used to improve and control the robustness of the high-performance materials (carbon, titanium and stainless steel) of the boat’s structure. Thanks to the design of the super-ventilated foil, stability is optimised and the impact of cavitation – a phenomenon in which water starts boiling around foils at extreme velocities, slowing the boat down – is avoided. During the speed run, data are collected from the various electronic modules and control sensors directly integrated into the boat and from the monitoring-sensor communications between the pilot and the technical crew on shore, including biometric data transferred through sensors worn on the pilot’s body, such as vital signs and security parameters.

“The SP80 project is exciting and inspiring,” says Fischer Connectors’ CEO Jonathan Brossard, “as it combines innovation and performance to push the boundaries of physical laws thanks to unique solutions and daring concepts. One member of the SP80 R&D; team is part of our own R&D; centre, making the exchange of expertise all the more efficient and easier. We look forward to discovering the technological breakthroughs on which the SP80 team is working and which Fischer Connectors is proud to support.”

The final design of the boat for the record will be revealed to the public in spring (European) 2022. The launching of the boat will take place at the end of 2022, while the first tests are scheduled in the south of France for the spring or autumn of 2023 – the two periods of the year that offer the best weather conditions for sailing.




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Helping mines get results from water improvements
News
South African mines operate under constrained, water-scarce conditions where every investment must be justified. Xylem’s Chetan Mistry explains how the right water technology partner helps mines prioritise high-value water systems across the mining lifecycle.

Read more...
From solar to water, onsite plants are the next big industrial resilience shift
News
South African industrial operators who secured their energy supply with onsite solar generation now face the same imperative with water. Robert Erasmus of Sanitech argues that onsite water treatment is the next essential pillar of business continuity.

Read more...
From the editor's desk: Pushing engineering to the limit
Technews Publishing News
Among the many things robots can do, it’s a lot of fun to follow how fast they are. They go from the Boston Dynamics cheetah, which first reached a record-breaking speed of 45,5 km/h, to the robot Charlie ...

Read more...
Schneider Electric concludes Innovation Summit Middle East and Africa
Schneider Electric South Africa News
Schneider Electric's Innovation Summit Middle East and Africa, held in Abu Dhabi with more than 2500 attendees, explored the convergence of energy, AI and industrial software, launched an Industrial AI study and announced the NEST Accelerator Programme for energy and industrial tech startups.

Read more...
VEGA brings measurement expertise beyond mining to Electra Mining Africa 2026
VEGA Controls SA News
VEGA used its Electra Mining Africa 2026 stand to demonstrate that its level and pressure measurement instruments extend well beyond mining, covering water, food and beverage, pharmaceuticals, chemicals, and oil and gas applications across the continent.

Read more...
Sustainable solutions for sugar
Bearing Man Group t/a BMG News
BMG received a Special Commendation Exhibition Stand Award at the South African Sugar Technologists’ Association Congress, where it showcased an integrated turnkey drive solution designed to simplify the upgrading of ageing crushing-mill drive systems.

Read more...
Measure, Manage, Maintain: The operating model behind SA’s water resilience
Siemens South Africa News
South Africa’s growing water crisis is putting pressure on infrastructure, municipalities and the economy. Siemens highlights how digital technologies, smarter operations and safe water reuse could help shift the country from crisis response towards a more resilient and sustainable water future.

Read more...
VEGA brings measurement expertise beyond mining to Electra Mining Africa 2026
VEGA Controls SA News
VEGA used its Electra Mining Africa 2026 stand to demonstrate that its level and pressure measurement instruments extend well beyond mining, covering water, food and beverage, pharmaceuticals, chemicals, and oil and gas applications across the continent.

Read more...
Schneider Electric concludes Innovation Summit Middle East and Africa
Schneider Electric South Africa News
Schneider Electric’s Innovation Summit Middle East and Africa, held in Abu Dhabi with more than 2500 attendees, explored the convergence of energy, AI and industrial software, launched an Industrial AI study and announced the NEST Accelerator Programme.

Read more...
RX Africa and Messe Muenchen India join forces to strengthen business platforms in Africa
RX Africa News
Messe Muenchen India has announced a strategic partnership with RX Africa to strengthen the scale, reach and market impact of its premier co-located trade fairs, analytica Lab Africa and IFAT Africa, ahead of their 2027 editions.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved