Maintenance, Test & Measurement, Calibration

Thermal camera with IR-Fusion technology

August 2021 Maintenance, Test & Measurement, Calibration

Comtest has introduced the Fluke TiS60+ with Fluke IR-Fusion technology that allows users to see things that are invisible to the eye and reveal problems that cannot be detected with other tools. The unit establishes a baseline for equipment and is simple for the entire team to use to detect temperature differences from further away. The instrument further boosts team performance with an impressive image resolution of 320 x 240. The infrared images taken with the TiS60+ capture smaller temperature differences from further away. So, if users are new to thermal imaging, or if the camera is being used by a team with varying levels of thermal imaging experience, the TiS60+ offers easy-to-use fixed focus. Some of the key features of the TiS60+ are:

• 320 x 240 resolution for clarity and image details that are crucial for a good result.

• 9 cm LCD screen allows for easy in-field problem recognition.

• Fixed focus means the Fluke TiS60+ is easy to use, just point and shoot.

• Temperature: up to 400°C can be measured, which covers most application variations.

• One-handed image capture, review and save capabilities.

See the problem and the location in one image

IR-Fusion technology automatically captures a digital visible light image at the same time as an infrared image. The camera blends the two images together, pixel for pixel, in a single display. Users can then view the image in full infrared, full visible light, or at several degrees of blending in between. The location of an infrared target can be precisely identified even if the infrared contrast is low and there is very little structure in the infrared image.

Fluke’s TiS60+ thermal camera is compatible with Fluke Connect with its modern visual design and intuitive navigation, making it easy to work faster. Simplified workflow and reporting, as well as better report templates, are all part of Fluke Connect’s powerful, easy-to-use software.

For more information contact Comtest, +27 10 595 1821,,


Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Fluke’s intrinsically safe tools
September 2021, Comtest , IS & Ex
Fluke offers a growing number of intrinsically safe tools, which dampen the available energy at the output terminals and do not produce any static electricity.

Gas instrument maintenance made easy
September 2021, Comtest , Maintenance, Test & Measurement, Calibration
Comtest is offering iNet Exchange that allows customers to say goodbye to gas instrument maintenance and say hello to an always-ready instrument fleet.

Compressed air purity analyser
September 2021, Artic Driers International , Maintenance, Test & Measurement, Calibration
These SUTO-iTEC units ensure that c/air systems comply with the relevant ISO 8573 air standard.

Troubleshooting process loops in Ex areas
September 2021, Comtest , IS & Ex
Tracking down problems within a process loop can be a difficult challenge in the best of environments. Doing so in an area that has the potential for explosion takes the degree of difficulty to another level.

Remote monitoring for CP systems
August 2021, Omniflex Remote Monitoring Specialists , Maintenance, Test & Measurement, Calibration
PowerView iREF8 allows businesses to add remote monitoring to existing cathodic protection (CP) systems.

Online monitoring of haul trucks
August 2021, SKF South Africa , Maintenance, Test & Measurement, Calibration
IMx-16 Multilog online monitoring systems on two mobile mining haul trucks at a leading copper mine in Zambia predict critical component failures and allow for planned predictive maintenance procedures to be carried out.

Monitoring oil and gas pipelines
August 2021, RJ Connect , Maintenance, Test & Measurement, Calibration
Moxa’s MDS-G4020 series offers a modular platform that can be fitted with fibre interfaces to connect pipeline subsystems to a control centre over long distances.

Non-contact meter for voltage measurements
August 2021, Comtest , Maintenance, Test & Measurement, Calibration
The new Fluke 377 FC and 378 FC Non-Contact Voltage True-RMS AC/DC Clamp Meters can measure voltage and current simultaneously without touching a live wire.

Optimum efficiency at healthcare facilities
Technews Industry Guide: Sustainable Manufacturing 2021, Comtest , Maintenance, Test & Measurement, Calibration
Comtest solutions to help surpass safety standards with optimum efficiency.

Remove water from factory air
Technews Industry Guide: Sustainable Manufacturing 2021, SMC Corporation South Africa , Maintenance, Test & Measurement, Calibration
A leading cause of costly downtime and emergency maintenance is water vapour and the resulting condensed water that is trapped in factory compressed air.