The safe input module allows safety-related components without integrated AS-interface to be connected to the AS-i Safety at Work system, allowing 2-channel inductive sensors with electronic OSSD outputs (e.g. GG712S) or light grids up to performance level d to EN 13849-1 to be connected to a single AS-i address using a 4- wire standard connection cable.
The quick-connection technology provides a high degree of installation reliability and flexibility, as the AS-i flat cable can be inserted from three different directions. LEDs indicate the status of the inputs and outputs and the communication.
The module meets the requirements up to SIL2 according to EN 62061 and PLd to EN 13849-1. In the event of a fault, the integrated communication monitoring switches the signal outputs off. The safe sensors and the outputs are completely powered by AS-i. The modules can be addressed either without voltage before mounting or when mounted and wired via the addressing socket. Only the AC1154 addressing unit plus the E70213 addressing cable are required.
HMI with maximum performance in the smallest of spaces ifm - South Africa
SCADA/HMI
Whenever clear communication, precision and performance in the smallest of spaces are required, the most compact member of ifm’s ecomatDisplay family is the perfect choice. The 11 cm HMI makes no compromises when it comes to human-machine interaction.
Read more...Smart alternative for float switches ifm - South Africa
Sensors & Transducers
With the LI level sensor, you can reliably detect leakages and point levels on a permanent basis. The capacitive measuring system has no moving parts. Malfunction or maintenance issues due to deposits on the mechanical parts are therefore eliminated.
Read more...Cathodic protection system for hazardous environments Omniflex Remote Monitoring Specialists
IS & Ex
When NSW Ports in Australia embarked on a two-year programme to rehabilitate the structures and combat corrosion levels at its Bulk Liquid Berth 1, it commissioned Melbourne-based consultancy Infracorr to deliver a bespoke cathodic protection) system. To deliver the system safely, Infraccor engaged cathodic protection specialist Omniflex to support the hazardous area and remote monitoring aspects of the CP system design.
Read more...Smart alternative for float switches ifm - South Africa
Sensors & Transducers
With the LI level sensor, you can reliably detect leakages and point levels on a permanent basis. The capacitive measuring system has no moving parts. Malfunction or maintenance issues due to deposits on the mechanical parts are therefore eliminated.
Read more...Versatile cylinder monitoring ifm - South Africa
Pneumatics & Hydraulics
This IO-Link cylinder sensor from ifm, with two configurable hardware outputs, will upgrade your machine in no time.
Read more...Always keeping an eye on the measured values ifm - South Africa
Electrical Power & Protection
Despite growing digitalisation, there are still many situations where analogue measured values such as the level in a tank or the temperature of a climatised room must be directly readable in the control cabinet or at the control desk. The current loop display is designed for precisely this purpose.
Read more...Powerful and versatile IIoT controller ifm - South Africa
PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.
Read more...Leading the way in PDS technology
IS & Ex
Booyco Electronics, an original equipment manufacturer specialising in mine safety equipment, has witnessed a surge in demand for its proximity detection systems (PDS) and collision prevention systems (CPS) since the Mine Health and Safety regulation focusing on trackless mobile machinery was promulgated. These systems offer crucial vehicle-to-pedestrian and vehicle-to-vehicle detection capabilities.
Read more...Ensuring lone worker safety
IS & Ex
The Conextivity Group’s startup – Wearin’ – has developed a solution connecting the lone worker with the control centre. This was commissioned by concrete producer, Pro Beton to ensure the safety of its teams of machine operators and cleaners working on production sites during the day, night, and weekends.
printer friendly version