Harsh process conditions have historically prevented the use of mechanical consistency transmitters in Kamyr continuous digester blow lines. The mechanical design of existing transmitters has not been robust enough to survive the unusually high flow rates enforced with uncooked chips and knots, high chemical concentrations with pH exceeding 13, temperatures above flash point as well as rocks and debris.
Traditionally the operators have made some estimation of the consistency by monitoring the current of the scraper motor, or by measuring the differential pressure at the outlet device at the bottom of the digester. While neither measurement has been adequate for the control of cold blow flow, they were used as an indication.
The KC/3 for severe process conditions
ABB Oy, KPM has developed a new consistency transmitter which finally meets the challenge. This blade type transmitter, called KC/3, is made of a solid titanium body without any seals, O-rings or gaskets. This leak-proof design can safely be installed in very severe process conditions, including blow lines and blow tank outlets.
Stora Enso in Oulu, Finland installed a KC/3 in its pulp mill blow line. The installation was straightforward as all required hardware was included in delivery. The special protective deflectors designed for blow line applications with detailed installation and welding instructions are part of the delivery.
The benefits
Occasionally the production rate can drop due to disturbances in flow internal to the digester e.g. chip column movement can stop because of channelling in the washing zone. This will immediately cause serious quality problems. Chips are over cooked, strength properties suffer, and, of course, production rate drops as a result of lower blow consistency.
Having a reliable consistency measurement in the blow line, the operator is warned immediately about a disturbance and can react swiftly. He could, for example, temporarily reduce the flow in washing circulation or change the locations of the wash liquid feed.
During normal run, the differential pressure at the bottom, scraper current and consistency track each other fairly well. The pressure difference does not see the consistency drop but on the contrary indicates higher numbers. Shortly thereafter, the scraper current of the diffusion washer proves that consistency really has dropped. In addition to prompt and reliable information of process disturbances, the production rate calculation becomes more accurate.
This helps to track and control the grade changes to the screening and washing stages. Reliable and exceptionally strong the KC/3 when installed in a blow line provides an important measurement to assist the operators with digester control.
Smart alternative for float switches ifm - South Africa
Sensors & Transducers
With the LI level sensor, you can reliably detect leakages and point levels on a permanent basis. The capacitive measuring system has no moving parts. Malfunction or maintenance issues due to deposits on the mechanical parts are therefore eliminated.
Read more...Telco sensors in the pulp and paper industry Gail Norton Instrumentation
Sensors & Transducers
The pulp and paper industry poses a major problem for most photoelectric sensors. The high level of contamination in these dusty, dirty and grimy environments makes it impossible for most competing sensors to operate and sense reliably and efficiently.
Read more...Precision acoustic imagers Comtest
Sensors & Transducers
To help users identify and localise ‘mechanical areas of interest’ within short timeframes, Comtest has added a unique new feature to Fluke’s ii910 precision acoustic imagers.
Read more...Efficiency and precision with IO-Link sensors RS South Africa
Sensors & Transducers
RS South Africa has its own brand known as RS PRO, which offers a choice of over 88 000 products across all industries and technologies. The guaranteed quality and breadth of this range make RS PRO the smart choice for your business.
Read more...Smart alternative for float switches ifm - South Africa
Sensors & Transducers
With the LI level sensor, you can reliably detect leakages and point levels on a permanent basis. The capacitive measuring system has no moving parts. Malfunction or maintenance issues due to deposits on the mechanical parts are therefore eliminated.
Read more...Optical fork sensor series Gail Norton Instrumentation
Sensors & Transducers
The OFS series consists of self-contained optical fork sensors that are housed in a durable, U-shaped aluminum housing, which operates in through-beam mode.
Read more...In-line process transmitter to optimise sterile processes WIKA Instruments
Sensors & Transducers
The new model DMSU22SA in-line process transmitter from WIKA helps to optimise sterile processes in the pharmaceutical and food industries, with less energy consumption, less cleaning effort ,and more safety.
Read more...Automated clean-in-place Endress+Hauser South Africa
Sensors & Transducers
A clean-in-place (CIP) process is integral to a food and beverage producer’s responsibility to deliver safe, high-quality products to consumers. However, as industries worldwide shift focus towards sustainability, CIP procedures face new challenges.
Read more...Signal conditioning is the protective armour between plant and field Omniflex Remote Monitoring Specialists
Sensors & Transducers
Measurement and control of physical properties are the foundation of all critical industrial technologies. Ian Loudon, international sales and marketing manager at remote monitoring specialist, Omniflex explains the challenges of industrial signal conditioning and the importance of safety engineering.
Read more...Precise detection of complex rotational movements Beckhoff Automation
Sensors & Transducers
The EP3751-0260 EtherCAT Box module by Beckhoff connects an acceleration sensor with an inertial measurement unit - a gyroscope. This provides accurate detection of acceleration and rotational motion in addition to shock, vibration and tilt measurement, both as preprocessed values and as raw sensor data.
printer friendly version