IT in Manufacturing

Innovation and intelligence for smart manufacturing

Technews Industry Guide: Industrial Internet of Things & Industry 4.0 IT in Manufacturing

Thanks to increased processing power and the availability of increasing volumes of data, the discussion about Artificial Intelligence (AI) is gaining momentum.

The current status

In the case of the advancements required for Industry 4.0, such as predictive maintenance and networked, efficient production, the use of adaptive algorithms offers enormous potential. Many manufacturing companies are realising that AI presents an opportunity to increase OEE and therefore combine reduced costs with increased productivity.

However, there is still something of a chasm between the desired status and the reality of the situation: many of the AI solutions advertised on the market, which are often cloud-based, have significant requirements in terms of infrastructure and IT. These solutions also work with an overwhelming amount of data that is laborious and time-consuming to prepare and process. The question of added value often remains somewhat murky as it is difficult to determine whether and how the investment in AI will provide a return.

The fact that system designs for the mechanical engineering sector are generally both complex and unique is another contributing factor. As a result, it is not a matter of simply transferring learnt experiences from other machinery as one might see for mass-produced products in the consumer goods industry. The majority of systems are generally so complex that it is not possible to map out the entire system mathematically (as a ‘white box’) and maintain costs at an acceptable level.

Omron’s solution

It is Omron’s view that a ‘black-box approach’ is more practical. Typically, the available data in most systems is undetermined for AI algorithms, and reliable operation can only be confirmed through testing, optimisation, and frequently, over-dimensioning.

Given these conditions, how does one go about designing and integrating AI that creates tangible added value in the production process? Instead of laboriously searching a huge volume of data for patterns, in addition to the processes that are currently running, Omron tackles things from the other direction. The required algorithms are integrated in the machine control system, thus creating the framework for real-time optimisation – at the machine, for the machine. In contrast to edge computing, where individual manufacturing lines or sites are analysed using limited processing power, the AI controller used by Omron, which features adaptive intelligence, is closer to the action and learns to distinguish normal patterns from abnormal ones for the individual machine.

The AI controller integrated in the Sysmac platform – a complete solution for factory automation featuring modules for control, motion and robotics, image processing and machine safety – is primarily used in the manufacturing process at the points where the customer is experiencing the greatest efficiency problems (bottlenecks). The processes gain intelligence based on previous findings and improvements that have been made and subsequently drive holistic optimisation of the entire manufacturing process.

Although OEE values of 80% and above have been achieved in isolated cases, in the automotive industry in particular, many of the systems currently in live usage have been generating figures of around 50%. If quality is improved and predictive maintenance is used to prevent machine downtimes, it is possible to make significant efficiency gains. The AI controller provides optimisation in exactly these areas. It is driven by practical requirements aimed at improving the OEE. It is important to note that an improvement of just a few percent can result in significant efficiency gains and cost reductions. With its new AI solution, currently in the testing phase with pilot customers, Omron hopes to drive added value and practical improvements, thus helping to create a smarter industry.


Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Get full value from factory floor data with data sciences
October 2021, Omron Electronics , IT in Manufacturing
Valuable information needs to be extracted from the data and presented to the right audience, at the right time and in the right way.

Collaboration in the automation ecosystem
October 2021, EPLAN Software & Services , IT in Manufacturing
Data created in the engineering process must be shared with everyone involved in the process.

Omron joins The Valuable 500
September 2021, Omron Electronics , News
The Valuable 500 aims to get leaders of multinational companies to bring about changes in business, society and the economy so that persons with disabilities can realise their true potential.

Siemens’ software for digital transformation of automotive design
September 2021, Siemens Digital Industries , IT in Manufacturing
Model-based development process and systems are used in Japan and globally to adapt to the biggest automotive transformation in 100 years.

Is track and trace through the factory a waste of time?
September 2021, Iritron , IT in Manufacturing
Modern track and trace solutions are purpose-built to introduce as little disruption to the existing production process as possible, while also being flexible enough to cater for plants that range from fully manual to fully automated.

Modularity for scalability
September 2021, RJ Connect , IT in Manufacturing
Businesses are looking for versatile solutions that are easy to maintain to ensure smooth operations while keeping costs down.

Saryx launches TMP
September 2021, Saryx Engineering Group , IT in Manufacturing
The digital transformation that has swept the world in the past few years has fundamentally altered most people’s approach to technology, with an increasing number seeking the ability to manage their ...

Secure boundaries enhance industrial cybersecurity
September 2021, RJ Connect , IT in Manufacturing
When enhancing cybersecurity, it is important to understand how industrial systems are exchanging data and how they connect to IT-level systems.

Siemens drives digital transformation at virtual Smart Mining forum
September 2021, Siemens Digital Industries , IT in Manufacturing
With its motto: ‘On the road to the digital future’, Siemens hosted its virtual Smart Mining forum from 3-5 August.

Deep-learning AI made accessible
September 2021, SICK Automation Southern Africa , IT in Manufacturing
SICK Automation has launched a set of deep-learning software and services called dStudio, making artificial intelligence (AI) more accessible to the southern African market. This software works with machine ...