classic | mobile
 

Search...

SA Instrumentation & Control Buyers' Guide

Technews Industry Guide - IIoT

Technews Industry Guide - Maintenance, Reliability & Asset Optimisation

 

Inductive sensors for intelligent position monitoring
February 2017, Sensors & Transducers


ifm’s new inductive sensors with IO-Link incorporate several functions in one unit. They can be used as switching sensors with adjustable switch point or measuring systems with a measured value transmitted via IO-Link. The output signal can be set to NC or NO as well as PNP or NPN. This allows reduction of the multitude of types, reducing the cost of stock.

Highest precision

The sensors are extremely precise and can detect even minute changes. Even brake shoe wear, spindle monitoring for deformation or tension of a saw blade are reliably detected. If the target leaves the detection zone or comes too close to the sensing face, a warning may be given. All data acquired can be transmitted and recorded via IO-Link.

For more information contact ifm electronic ZA, 086 143 6772, info.za@ifm.com, www.ifm.com


Credit(s)
Supplied By: ifm Electronic RSA
Tel: +27 12 450 0400
Fax: +27 12 450 0412
Email: info.za@ifm.com
www: www.ifm.com
Share via email     Share via LinkedIn   Print this page

Further reading:

  • Omron combats counterfeiting in pharmaceutical applications
    February 2017, Omron Electronics, Sensors & Transducers
    Omron’s expertise in machine automation and vision systems means it is ideally placed to advise and assist in implementing serialisation systems to reduce counterfeiting and improve consumer information ...
  • Accurate water activity measurement in food
    February 2017, Labotec, Sensors & Transducers
    Free water in food products can be jointly responsible for the growth of undesirable organisms, such as bacteria or fungi, as well as chemical or biochemical reactions that react to form polymeric products, ...
  • Telco Sensors solve packaging problem
    February 2017, Gail Norton Instrumentation, Sensors & Transducers
    Telco Sensors provide the packaging industry with photoelectric/infrared sensor solutions for challenging applications. The company’s sensor solution experience and problem solving spans various fields ...
  • Leuze’s new contrast sensor
    February 2017, Countapulse Controls, Sensors & Transducers
    A new contrast sensor that combines product usability with high performance has been added to the Leuze sensing solution product line-up. Ideally suited to packaging processes, the innovative sensor will ...
  • Fibre optic sheet break detector
    February 2017, UIC Instrumentation, Sensors & Transducers
    Kajaani Process Measurements’ KB2 fibre optic sheet break detector is designed to handle all kinds of break detection applications. With RGB-colour based sensing it can detect different colours and then ...
  • Temperature measuring amplifiers with ultra high channel density
    February 2017, RET Automation Controls, Sensors & Transducers
    Turck has added the IMX12-TI temperature measuring amplifier to its IMX interface technology series. With a width of only 12,5 mm and a high channel density, the devices save valuable space in the cabinet. ...
  • Jumo sensors with IO-Link
    February 2017, ASSTech Process Electronics + Instrumentation , Sensors & Transducers
    Jumo has introduced two new sensors with an IO-Link interface – the dTRANS p35 pressure sensor and the dTRANS T1000 temperature sensor. Both have a wide application range, from tool machines to the food ...
  • Capacitive sensors with IO-Link
    January 2017, RET Automation Controls, Sensors & Transducers
    Turck has introduced its BCT capacitive sensors with an IO-Link interface. IO-Link makes it easy to set the parameters of the capacitive switch in applications such as level control. The internal process ...
  • LVIT technology offers flexibility in factory automation
    January 2017, Sensors & Transducers
    LVITs (linear variable inductive transducers) are relatively low-cost, contactless position sensing devices, which utilise eddy currents induced in the surface of a conductive movable element that is ...
  • Electronic circuit breakers with IO-Link
    January 2017, ifm Electronic RSA, Electrical Power & Protection
    As opposed to the 230 V primary side, circuit protection in the secondary circuit is often neglected. Another issue is that in the event of a failure of the 24 VDC voltage supply, standard mechanical ...
  • Weld nut sensor detects M5 nuts
    January 2017, RET Automation Controls, Sensors & Transducers
    Turck has added variants with a 4 mm sensor probe to its range of weld nut sensors. This makes the detection of missing M5 nuts before welding even simpler. Turck has also improved the abrasion resistance ...
  • Precision detection with laser sensors
    January 2017, Countapulse Controls, Sensors & Transducers
    The need to detect small parts and accurately position these has increased in demand as many products become ever smaller. Countapulse Controls offers a range of laser sensors that are capable of reliably ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    classic | mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.