DSP, Micros & Memory


1000-core processor developed

13 July 2016 DSP, Micros & Memory Computer/Embedded Technology

A microchip containing 1000 independent programmable processors has been designed by a team at the University of California, Davis’ department of electrical and computer engineering. The energy-efficient ‘KiloCore’ chip has a maximum computation rate of 1,78 trillion instructions per second and contains 621 million transistors.

“To the best of our knowledge, it is the world’s first 1000-processor chip and it is the highest clock-rate processor ever designed in a university,” said Bevan Baas, professor of electrical and computer engineering, who led the team that designed the chip architecture. While other multiple-processor chips have been created, none exceed about 300 processors, according to an analysis by Baas’ team. Most were created for research purposes and few are sold commercially. The KiloCore chip was fabricated by IBM using its 32 nm CMOS technology.

Each processor core can run its own small program independently of the others, which is a fundamentally more flexible approach than so-called ‘single-instruction-multiple-data’ approaches utilised by processors such as GPUs (graphics processing units). The idea is to break an application up into many small pieces, each of which can run in parallel on different processors, enabling high throughput with lower energy use, Baas said.

Because each processor is independently clocked, it can shut itself down to further save energy when not needed, said graduate student Brent Bohnenstiehl, who developed the principal architecture. Cores operate at an average maximum clock frequency of 1,78 GHz, and they transfer data directly to each other rather than using a pooled memory area that can become a bottleneck for data.

The chip is the most energy-efficient ‘many-core’ processor ever reported, Baas said. For example, the 1000 processors can execute 115 billion instructions per second while dissipating only 0,7 Watts, low enough to be powered by a single AA battery. The KiloCore chip executes instructions more than 100 times more efficiently than a modern laptop processor.

Applications already developed for the chip include wireless coding/decoding, video processing, encryption, and others involving large amounts of parallel data such as scientific data applications and data centre record processing. The team has completed a compiler and automatic program mapping tools for use in programming the chip.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

General-purpose evaluation board
Altron Arrow DSP, Micros & Memory
Based on the 32-bit Arm Cortex-M7 S32K3 MCU in a 172 HDQFP package, the S32K3X4EVB-T172 offers dual cores configured in lockstep mode, ASIL D safety hardware, and HSE security engine.

Read more...
Unlock power efficiency with the new generation of ultra-low-power MCUs
DSP, Micros & Memory
STMicroelectronics has announced a one-hour webinar on its STM32U0, the company’s latest generation of entry-level, ultra-low-power MCUs.

Read more...
Using AMD HLS to supercharge your design performance
DSP, Micros & Memory
This workshop explores the power and capabilities of High-Level Synthesis (AMD Vitis HLS) to dramatically accelerate embedded software to hardware speeds.

Read more...
The 8-bit survival syndrome – Part 2
DSP, Micros & Memory
Just like the 4-bit pre-microcontroller, the 8-bit MCU has been finding ways to stick around. Their features and speeds have been improving, offering competitive reasons to work with them.

Read more...
Enhanced code protection for USB µC portfolio
Future Electronics DSP, Micros & Memory
To help easily incorporate USB power and communication functionality into embedded systems, Microchip Technology has launched the AVR DU family of microcontrollers.

Read more...
General-purpose MCU with RISC-V architecture
EBV Electrolink DSP, Micros & Memory
Renesas has released a general-purpose MCU to enhance its existing RISC-V portfolio, and this is its first MCU using a RISC-V core developed internally at the company.

Read more...
8-bit MCU with I3C support
Avnet Silica DSP, Micros & Memory
The PIC18-Q20 8-bit microcontrollers from Microchip easily interface with devices operating in multiple voltage domains, and the built-in I3C interface supports higher-speed and lower-power data transfers than I2C.

Read more...
An evolutionary step in customisable logic
Altron Arrow DSP, Micros & Memory
Microchip Technology is offering a tailored hardware solution with the launch of its PIC16F13145 family of microcontrollers, which are outfitted with a new Configurable Logic Block module.

Read more...
MCU for battery-powered applications
Altron Arrow DSP, Micros & Memory
Included in ST’s family of devices is the STM32U031, an ultra-low-power MCU featuring an ARM Cortex-M0+ 32-bit core running at up to 56 MHz.

Read more...
Serial SRAM up to 4 MB
EBV Electrolink DSP, Micros & Memory
The chips are designed to provide a lower-cost alternative to traditional parallel SRAM products, and include optional battery backup switchover circuitry in the SRAM memory to retain data on power loss.

Read more...