A regional substation was tasked with improving the substation’s performance and reducing maintenance problems, but without replacing several key serial IEDs already in operation. Since the many RTUs, HMIs, switches, and IEDs installed in the substation were from different vendors and some used proprietary protocols, several different drivers had to be installed to allow the power scada system to manage the entire substation. A key part of the solution was to upgrade or replace the existing scada system, RTUs, HMIs, and switches to support the IEC 61850 MMS protocol and thereby achieve unified MMS monitoring and vendor-independent maintenance. In order to keep the existing serial IEDs connected to the system, RTUs were considered for connecting the legacy Modbus and DNP3 IEDs to the substation’s network.
System requirements
• Use IEC 61850 communication for power scada supervision.
• High-port density of serial connections to network the existing Modbus, DNP3 and proprietary legacy IEDs to the substation network.
• Robust reliability to withstand harsh EMI conditions.
Moxa’s solution
Instead of using RTUs, the system integrator found that Moxa’s NPort S9650I was a perfect solution for connecting the ageing, legacy IEDs to the substation’s IEC 61850 network. Since the NPort S9650I serial device servers support the IEC 61850 MMS protocol, they can be monitored by the power scada system. The NPort S9650I provides up to 16 serial ports to connect existing Modbus and DNP3 IEDs, and uses the MMS protocol to communicate with both the power scada and RTUs to report the status of legacy IEDs, such as turning a modem on or off, keeping track of TX/RX counts, etc.
The NPort S9650I supports both the IEEE 1588 protocol and IRIG-B time synchronisation, making it possible to construct a timeline of events for troubleshooting purposes. The NPort S9650I can obtain the precise time from the IEEE 1588 protocol (via an Ethernet port) or IRIG-B time server (via a BNC connector) and then send the signals over the serial connections to synchronise the serial IEDs with the rest of the network.
After the substation’s Ethernet equipment was upgraded to a total MMS solution, the power scada system could use the unified MMS interface to monitor all of the various Ethernet devices, regardless of brand. In fact, the NPort S9650I’s serial-to-Ethernet capability and support of the MMS protocol allowed the substation’s power scada system to monitor the status of all the substation’s legacy serial IEDs in addition to the Ethernet-based devices.
EtherCAT interoperability removes industrial networking barriers
Fieldbus & Industrial Networking
Selecting the right communication technology is one of the most important decisions engineers make, and interoperability helps with that decision. Key development tools and standards ensure interoperability among many EtherCAT devices and manufacturers.
Read more...Condition monitoring to go Turck Banner Southern Africa
Fieldbus & Industrial Networking
Anyone who wants to efficiently monitor the climate in control cabinets will find a comprehensive range of control cabinet monitors for the DIN rail in Turck Banner’s cabinet condition monitoring family.
Read more...Affordable building management system product range
Fieldbus & Industrial Networking
Schneider Electric has unveiled its EasyLogic Building Management System range, designed for basic building architectures, to the local marketplace. This is a complete and cost-effective range of field controllers and sensors that are both easy to install and scalable.
Read more...Flexible EtherCAT communication interface for DALI-2 Beckhoff Automation
Fieldbus & Industrial Networking
The EL6821 EtherCAT Terminal from Beckhoff allows up to 64 DALI/DALI-2 slaves and 64 DALI-2 input devices to be connected. The TwinCAT 3 System Manager makes it easy to configure and parameterise DALI devices flexibly.
Read more...EtherCAT-based control technology for building automation Beckhoff Automation
Fieldbus & Industrial Networking
Modern non-residential buildings place many high demands on building automation. This can be optimally implemented with EtherCAT-based control technology from Beckhoff, which provides an efficient central automation architecture thanks to ultra-fast data communication.
Read more...PC-based control for university studies Beckhoff Automation
Fieldbus & Industrial Networking
The IDEA box developed at Heilbronn University of Applied Sciences is designed to introduce students to the topic of Industry 4.0 in a simple and practical way. At the core of the corresponding demo case is PC-based control from Beckhoff.
Read more...Boosting cybersecurity in substation automation systems RJ Connect
Electrical Power & Protection
A significant surge in distributed energy resources (DERs) and energy storage systems, along with the upward trend in unmanned substations, have made power grids a lot more complex. To address these instabilities in power grids, digital substations increasingly play an important role in power transmission.
Read more...A new standard in high-speed Ethernet communication
Fieldbus & Industrial Networking
The TXMC897 module from TEWS Technologies supports a range of Ethernet standards and speeds, making it suitable for diverse applications, including the defence, industrial, and IIoT markets.
Read more...Safeguarding an energy storage system for renewable energy RJ Connect
Electrical Power & Protection
Following the trend toward decarbonising the global economy, a grid-level energy storage system (ESS) builder is expanding its ESS capacity for renewable energy. Its mission is to provide a reliable and affordable ESS, as this is key for grid operators to be able to balance power demand and supply during peak and off-peak times.
Read more...Data-driven battery production Turck Banner Southern Africa
Fieldbus & Industrial Networking
The availability of high-performance batteries at moderate prices is one of the most important factors for the success of electromobility. As a long-standing automation partner to the automotive industry, Turck Banner supports the major battery manufacturers with its know-how.
printer friendly version