IS & Ex


Don’t forget to test your fire protection systems before the holiday shutdown

November 2018 IS & Ex

As the year draws to a close, it is natural that people start looking forward to the holidays. It is therefore quite easy to neglect to consider the damaging effect a fire could have on businesses during the annual shutdown. In light of the recent and tragic deaths of fire fighters in Johannesburg, AST’s advice is to ensure that while attention turns to the festive season, business owners should ensure that their premises have the necessary fire protection measures in place.

Routine checks before the annual shutdown

Routine service checks must be completed prior to the holidays, which should include servicing of fire extinguishers, fire detection systems, sprinkler systems, automatic fire extinguishing systems, fire sealing and room integrity testing, and so forth.

Those businesses that currently do not have any form of fire protection may want to consider the losses they could potentially incur. AST can assist with most fire risk requirements through its knowledgeable and friendly sales team who are always ready to assist.

In addition to the above, it is also advisable to check all electrical systems and make sure they are properly isolated if necessary. Any process that can lead to an ignition must be disabled if not being used during the festive season, and all materials and equipment must be stored away.

In case anything goes wrong, make sure your insurance policies are in order and that your building is fully compliant with the requirements of the National Building Regulations and the relevant fire engineering standards. Should you have Pyroshield Gaseous Fire Extinguishing cylinders, be sure that they are up-to-date on all OHSA:PER (2009) requirements, such as mandatory 10-year hydrostatic pressure testing. By not doing so, you could fall foul of the law, and indeed may void insurance policies.

AST has a full team of fire system inspectors and fire systems designers who are able to perform inspections and ensure compliance. For hydrostatic pressure testing, they can assist with rapid transport and quick fill solutions at no cost.

If the company will be running a skeleton staff during the holidays, ensure that they have been trained to respond to a fire alarm and understand and are capable of following the necessary procedures. They must know where the nearest fire brigade is and how to reach them. These small details can prevent a business going up in smoke.

If the business is being shut down completely, make sure there is an automatic means of sensing a fire and remote signalling an alarm to someone. If not, AST can assist with this.

An early alert, followed with a fire-fighting response, can mean the difference between a minor incident and the loss of property, or even worse, lives. Performing these routine checks before you shut down for the holidays will help to ensure that you are not greeted by an unpleasant surprise when you return. https://www.facebook.com/astafrica/?ref=settings

For more information contact Grant Wilkinson, Alien Systems & Technologies, +27 11 949 1157, sales@astafrica.com, www.astafrica.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cathodic protection system for hazardous environments
Omniflex Remote Monitoring Specialists IS & Ex
When NSW Ports in Australia embarked on a two-year programme to rehabilitate the structures and combat corrosion levels at its Bulk Liquid Berth 1, it commissioned Melbourne-based consultancy Infracorr to deliver a bespoke cathodic protection) system. To deliver the system safely, Infraccor engaged cathodic protection specialist Omniflex to support the hazardous area and remote monitoring aspects of the CP system design.

Read more...
Leading the way in PDS technology
IS & Ex
Booyco Electronics, an original equipment manufacturer specialising in mine safety equipment, has witnessed a surge in demand for its proximity detection systems (PDS) and collision prevention systems (CPS) since the Mine Health and Safety regulation focusing on trackless mobile machinery was promulgated. These systems offer crucial vehicle-to-pedestrian and vehicle-to-vehicle detection capabilities.

Read more...
Ensuring lone worker safety
IS & Ex
The Conextivity Group’s startup – Wearin’ – has developed a solution connecting the lone worker with the control centre. This was commissioned by concrete producer, Pro Beton to ensure the safety of its teams of machine operators and cleaners working on production sites during the day, night, and weekends.

Read more...
Safety breakthrough in live testing of large equipment
IS & Ex
While essential to effective maintenance, the live testing of mining vehicles and equipment can be hazardous and time consuming; but this has all changed with the SafeGauge range of digital testing systems. Developed in Australia, SafeGauge is now distributed in South Africa by Booyco Electronics, known for its leading role in promoting safety on mines through its proximity detection systems.

Read more...
Explosion-protected control units
Pepperl+Fuchs IS & Ex
The new range of control units from Pepperl+Fuchs offers a clever solution for switching and controlling circuits in hazardous areas that are designated ATEX/IECEx Zones 1/21 and 2/22.

Read more...
The importance of understanding SIL ratings
Omniflex Remote Monitoring Specialists IS & Ex
Major industrial accidents around the world, like the Bhopal chemical plant disaster, have occurred due to insufficient and poorly designed safety systems. Gary Bradshaw, director of alarm and safety system specialist Omniflex, explains how SIL ratings work and the dangers of the misconceptions that exist around them.

Read more...
The importance of understanding SIL ratings
Omniflex Remote Monitoring Specialists IS & Ex
Major industrial accidents around the world, like the Bhopal chemical plant disaster, have occurred due to insufficient and poorly designed safety systems. Gary Bradshaw, director of alarm and safety system specialist Omniflex, explains how SIL ratings work and the dangers of the misconceptions that exist around them.

Read more...
Mobile workers 4.0
Pepperl+Fuchs IS & Ex
Intrinsically safe smart devices enable lone mobile workers to work seamlessly throughout the plant with the help of digital support. The significant increase in production efficiency and reliability is noticeable.

Read more...
Functional safety over EtherCAT
Eagle Africa Technology IS & Ex
HMS Networks has released a new version of the Ixxat SafeT100 module, allowing users to implement safe I/Os for FSoE (Functional Safety over EtherCAT), which was previously available only for PROFIsafe and CIP Safety.

Read more...
Overcurrent protection for explosion-protected areas
Phoenix Contact IS & Ex
The customisable Caparoc circuit breaker system from Phoenix Contact now also offers modules for explosion-protected areas, thereby extending the range of possible applications.

Read more...