Editor's Choice


Nick Denbow’s European report: Leaps in technology: implants and liquid lenses

August 2018 Editor's Choice

Whilst pacemakers and other implants have become fairly commonplace in medical treatment systems, these still rely on battery technology, and have a limited life. When dealing with electrodes or sensor devices positioned carefully, sometimes deep in the body, a battery capsule is embedded under the skin, to enable future access for replacement. A new development project at MIT, to be more fully described at an August conference, describes a very small medical implant that can be powered and interrogated using radio frequency waves, even though it is deep within the body.

Medical devices that can be ingested or implanted in the body could offer new ways to diagnose, monitor, and treat diseases. In their study, the researchers tested a prototype about the size of a grain of rice, but they anticipate that it could be made smaller. Giovanni Traverso, a research affiliate at MIT’s Koch Institute for Integrative Cancer Research, is now working on a variety of ingestible systems that can be used to deliver drugs, monitor vital signs, and detect movement of the GI tract.

In the brain, implantable electrodes that deliver an electrical current are used for deep brain stimulation, which is often used to treat Parkinson’s disease or epilepsy. Wireless brain implants could also help deliver light to stimulate or inhibit neuron activity through opto-genetics.

In animal tests the researchers have shown that the radio waves can power devices located 10 cm deep in tissue, from a distance of 1 m. Until now, this has been difficult to achieve because radio waves tend to dissipate as they pass through the body. To overcome that, the researchers devised in vivo networking (IVN), a system that relies on an array of antennas that emit radio waves of slightly different frequencies. As the radio waves travel, they overlap and combine in different ways. At certain points, where the high points of the waves overlap, they can provide enough energy to power an implanted sensor.

Liquid lenses

The liquid lens is a very small lens device, now most commonly used in iPads and mobile phones. To a keen photographer, the picture quality produced from such a small lens is unbelievable. The liquid droplet forming the lens has its shape changed using an electronic control system, which is able to change focal length (to focus) and optical axis (for optical image stabilisation, ie to reduce camera shake effects) all within a few milliseconds.

The idea for this invention came from research on the phenomenon known as ‘electro-wetting’ by Professor Bruno Berge, in Lyon, France. The professor has been working on liquid interfaces since 1991 at the Ecole Normale Supérieure in Lyon. A drop of water affected by electro-wetting can function as a variable magnifying glass: so two clear, non-miscible liquids of the same density, one being electronically controlled water, can serve as a lens, depending on the curvature of the interface between them. In the finished lens, the two liquids are sealed and held in a metal casing that is typically smaller than 10 mm in diameter.

Berge first approached Canon with the invention, but attracted no funding. So with French state-funding plus some investment fund backing, Berge founded the company VariOptic in 2002. In 2007 they established a production line in China, and in 2009 the first industrial barcode reader with a VariOptic lens appeared on the market. Machine vision manufacturer Cognex was an early adopter of the technology, for barcode ID readers.

A new component now available from IDS (Imaging Development Systems) is a single board USB interface camera module, available for use with and control of liquid lenses, which IDS supply. These low-cost uEye LE industrial cameras with twist-proof USB connection and practical USB power delivery are suitable for logistics systems e.g. for package acceptance and sorting, for microscopy and traffic monitoring, as well as for installation in small medical or industrial devices.

As an avid aero-photographer, using long and heavy telephoto lenses, I am still waiting for a lightweight telephoto ‘liquid lens’ for my Canon camera. But I also use antique, 200 year old telescopes to spot aircraft – they are as good as modern optical devices, and better made. I did mention to Prof Berge, that one of my favourite telescopes, dating from the 1790s was made by Matthew Berge, his namesake!

Nick Denbow spent 30 years as a UK-based process instrumentation marketing manager, and then changed sides – becoming a freelance editor and starting Processingtalk.com. Avoiding retirement, he published the INSIDER automation newsletter for five years, and then acted as their European correspondent. He is now a freelance Automation and Control reporter and newsletter publisher, with a blog on www.nickdenbow.com





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Bringing Industry 4.0 to a castings foundry for heavy industries
Editor's Choice
Moving to Industry 4.0 takes time and determination, especially for an established company in a heavy industry. Castings foundry, POK in Mexico has moved toward Industry 4.0 in a series of steps over several years, changing from manual to automated systems for more available, immediate and reliable data.

Read more...
SMOM – the future is here now
Iritron Editor's Choice IT in Manufacturing
In his presentation at the recent MESA Africa conference, Neels van der Walt, business development manager at Iritron, revealed the all-encompassing concept of smart mining operations management (SMOM), and why it is inextricably linked to the future of worldwide mining operations.

Read more...
Navigating disruption in manufacturing
Editor's Choice IT in Manufacturing
When considering IT in manufacturing, the underlying assumption is twofold: first, a wave of valuable maturing technologies can be harnessed to create new business value, and second, the environment in which these technologies will be applied will be relatively predictable, with change following a manageable, evolutionary path. However, recent disruptions have shattered these assumptions.

Read more...
The fascination of movement
Editor's Choice Motion Control & Drives
A motor from Faulhaber provides gentle motion for the finest watches in the world.

Read more...
Complete system for transparent energy monitoring
Beckhoff Automation Editor's Choice Electrical Power & Protection
Transparent energy monitoring reduces both machine downtime and the necessity to oversize the corresponding components. Added to these advantages are simplified preventive maintenance, and increased production efficiency. The wide range of PC-based control technology from Beckhoff offers a solution that can be optimally adapted to individual applications.

Read more...
Iritron’s year of consolidation
Iritron Editor's Choice System Integration & Control Systems Design
Despite the multiple challenges faced by businesses in South Africa, the buoyancy of the technology sector worldwide has produced some green shoots for automation specialist, Iritron.

Read more...
Five edge opportunities for SIs to maximise revenue in 2024
Editor's Choice System Integration & Control Systems Design
System integrators continue to face the challenge of doing more with less – supporting complex operations, while meeting production schedules with limited resources, and innovating to increase efficiency, maximise safety and reduce risk.

Read more...
WEG Africa applauds energy standards for motor efficiency
WEG Africa Editor's Choice Electrical Power & Protection
In a country where most electric motors are not energy efficient, the announcement by South Africa’s government of its plans to introduce Minimum Energy Performance Standards is not a day too soon.

Read more...
World first planetary gearbox customisation
SEW-Eurodrive Editor's Choice Motion Control & Drives
When a mining operation in Mpumalanga found that one of its planetary gearboxes on a high-torque conveyor was failing, it called SEW-EURODRIVE for a solution. Leveraging the latest intelligent technology, the solution was a pioneering innovation providing a cost-effective replacement that will ensure reliable performance.

Read more...
Thermoforming machine automation
Beckhoff Automation Editor's Choice Motion Control & Drives
Hamer has joined forces with Beckhoff to develop a thermoforming machine for water-based cellulose pulp to produce fully recyclable and environmentally-friendly cellulose packaging.

Read more...