IS & Ex


AST’s Pyroshield fire protection

July 2018 IS & Ex

Next year will be the twentieth year since Alien Systems & Technologies (AST) was incorporated in South Africa. During that time the company has developed an array of products that have successfully saved its customers from the ravages of fire, whilst expanding its business into Europe, Australia, Far East, Africa and the Americas.

A case in point has been two recent incidents at large corporates where fire broke out. In April, a large multinational insurance company in Sandton’s CBD experienced a fire in its server room. A UPS flashed and quickly escalated into a full fire. The smoke detection system operated and then AST’s Pyroshield gaseous fire extinguishing system kicked in. The fire was quickly extinguished and the event was reduced to a minor incident.

Without Pyroshield protection for the server room, the IT backbone of the business could have been wiped out.

A few weeks later, another fire broke out in a computer room in Isando at an international logistics and shipping company. Once again AST’s Pyroshield system was activated and extinguished the fire, reducing the consequences of the outbreak to minimal.

These are just two recent incidents where AST’s award winning Pyroshield system has saved customers many millions of rands in recapitalising infrastructure and minimising operational losses.

AST’s Pyrogen Aerosol fire extinguishing system has operated countless times on mines over the last 17 years. Most recently, a substation would have burnt down at a Portland Cement facility. The cost in production losses would have amounted to many millions. Such is the efficacy of the Pyrogen solution in extinguishing fires that there is virtually no mine in South Africa that does not have Pyrogen installed somewhere to protect its electrical reticulation systems.

AST also designs and supplies the Cirrus Hybrid aspirating fire and smoke detector. Such devices are installed where normal point type smoke detectors are impractical, such as in high bay warehouses or in areas where high airflows from cooling systems are present. This device actively samples the air for the earliest signs of an impending fire threat and is able to discount false alarms that plague optical only detectors, for example from dust.

During the construction of a large blue chip data centre in Johannesburg, a fire broke out during the night when a heater bank was left on after load testing the air cooling system. The Cirrus Hybrid detection system, although not properly commissioned, still detected the fire and sounded the fire alarms. A security guard was able to extinguish the fire. This system ultimately saved the project and ensured that the client could deliver the data centre for cloud hosting purposes on time.

There was a fire on a very large, several hundred million rand printing press in Jet Park. The client’s insurance company recommended AST for an effective solution since the existing system did not work adequately. The fire was extinguished, but only after severe damage. AST responded with an automatic fire detection and CO2 extinguishing solution in an extremely volatile environment with ink bath stations that have flammable solvents with low flash points. There were two further fires on the machine since the AST system was installed three years ago and each time the system was activated and extinguished the fire without any significant damage to the machine. Downtime was limited to a day or two in each case. This is in comparison to the six months loss in production after the first fire due to the poorly designed and ineffective competitor solution. The client is required to deliver on multimillion rand contracts by using this particular press and cannot afford not to have this machine running.

With a vast range of products and solutions, ECSA registered engineers on its design team, and a history built on success, AST is able to deliver virtually a wide range of turnkey and integrated systems for all kinds of client needs. Applications include conveyor belt systems, data centres, building fire detection and alarm systems, hospital fire detection and alarm systems, mining machines such as stacker/reclaimers, printing press machines, hydraulic lubricating oil packs, intrinsically safe systems, sensitive document stores, prestigious buildings, museums and warehouses.

Built on knowledge, research, development and engineering principles, AST is looking forward to celebrating its forthcoming twentieth year with its ongoing commitment to deliver high quality products and integrated turnkey systems and to save its clients from the destructive effects and life-threatening power of fire.

For more information contact Grant Wilkinson, Alien Systems & Technologies, +27 (0)11 949 1157, sales@astafrica.com, www.astafrica.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cathodic protection system for hazardous environments
Omniflex Remote Monitoring Specialists IS & Ex
When NSW Ports in Australia embarked on a two-year programme to rehabilitate the structures and combat corrosion levels at its Bulk Liquid Berth 1, it commissioned Melbourne-based consultancy Infracorr to deliver a bespoke cathodic protection) system. To deliver the system safely, Infraccor engaged cathodic protection specialist Omniflex to support the hazardous area and remote monitoring aspects of the CP system design.

Read more...
Leading the way in PDS technology
IS & Ex
Booyco Electronics, an original equipment manufacturer specialising in mine safety equipment, has witnessed a surge in demand for its proximity detection systems (PDS) and collision prevention systems (CPS) since the Mine Health and Safety regulation focusing on trackless mobile machinery was promulgated. These systems offer crucial vehicle-to-pedestrian and vehicle-to-vehicle detection capabilities.

Read more...
Ensuring lone worker safety
IS & Ex
The Conextivity Group’s startup – Wearin’ – has developed a solution connecting the lone worker with the control centre. This was commissioned by concrete producer, Pro Beton to ensure the safety of its teams of machine operators and cleaners working on production sites during the day, night, and weekends.

Read more...
Safety breakthrough in live testing of large equipment
IS & Ex
While essential to effective maintenance, the live testing of mining vehicles and equipment can be hazardous and time consuming; but this has all changed with the SafeGauge range of digital testing systems. Developed in Australia, SafeGauge is now distributed in South Africa by Booyco Electronics, known for its leading role in promoting safety on mines through its proximity detection systems.

Read more...
Explosion-protected control units
Pepperl+Fuchs IS & Ex
The new range of control units from Pepperl+Fuchs offers a clever solution for switching and controlling circuits in hazardous areas that are designated ATEX/IECEx Zones 1/21 and 2/22.

Read more...
The importance of understanding SIL ratings
Omniflex Remote Monitoring Specialists IS & Ex
Major industrial accidents around the world, like the Bhopal chemical plant disaster, have occurred due to insufficient and poorly designed safety systems. Gary Bradshaw, director of alarm and safety system specialist Omniflex, explains how SIL ratings work and the dangers of the misconceptions that exist around them.

Read more...
The importance of understanding SIL ratings
Omniflex Remote Monitoring Specialists IS & Ex
Major industrial accidents around the world, like the Bhopal chemical plant disaster, have occurred due to insufficient and poorly designed safety systems. Gary Bradshaw, director of alarm and safety system specialist Omniflex, explains how SIL ratings work and the dangers of the misconceptions that exist around them.

Read more...
Mobile workers 4.0
Pepperl+Fuchs IS & Ex
Intrinsically safe smart devices enable lone mobile workers to work seamlessly throughout the plant with the help of digital support. The significant increase in production efficiency and reliability is noticeable.

Read more...
Functional safety over EtherCAT
Eagle Africa Technology IS & Ex
HMS Networks has released a new version of the Ixxat SafeT100 module, allowing users to implement safe I/Os for FSoE (Functional Safety over EtherCAT), which was previously available only for PROFIsafe and CIP Safety.

Read more...
Overcurrent protection for explosion-protected areas
Phoenix Contact IS & Ex
The customisable Caparoc circuit breaker system from Phoenix Contact now also offers modules for explosion-protected areas, thereby extending the range of possible applications.

Read more...