Sensors & Transducers


Use excess gain to choose an optical sensor

July 2018 Sensors & Transducers

Understanding excess gain in optical sensors – and how much your application requires – is an important part of choosing the right sensor technology. This article explains what excess gain is, how it is measured, and general guidelines for how much excess gain is needed for sensing applications in various industrial environments.

What is excess gain?

Excess gain is a measure of the minimum light energy needed for reliable sensor operation. The light signal that your sensor emits is factory-calibrated to a certain level of performance. However, contaminants in the sensing environment, such as dirt, dust, smoke and moisture can cause signal attenuation. Excess gain may be seen as the extra sensing energy available to overcome this attenuation.

Excess gain can be expressed as the following formula: excess gain = light energy falling on receiver element/sensor’s amplifier threshold (where threshold is defined as the level of sensing energy required by the sensor’s amplifier to cause the sensor’s output to switch ‘on’ or ‘off’).

Why excess gain is important for optical sensors

An excess gain curve, an important part of every photoelectric sensor specification, is plotted on an x/y axis. It shows the excess gain available for a particular sensor or sensing system, as a function of distance. Excess gain curves are plotted for conditions of perfectly clean air and maximum receiver gain.

Choose a sensor that will give you the optimal excess gain for your application

If the general conditions of a sensing area are known, the excess gain levels that follow may be used as guidelines for assuring that the sensor’s light energy will not be entirely lost to attenuation. These guidelines include a safety factor for subtle sensing variables such as gradual sensor misalignment and small changes in the sensing environment.

Clean air – 1.5x excess gain (EG)

For a perfectly clean operating environment, an excess gain of 1.5x (50% more energy than the minimum needed for operation) is suggested. Some environments that have ‘clean air’ are those found in the semiconductor or pharmaceutical industries. In these environments, no dirt builds up on the sensor lenses or retroreflectors.

Slightly dirty – 5x EG

An office or a clean factory might be characterised as a ‘slightly dirty’ environment. This means sensor lenses or retroreflectors may experience a slight build-up of dust, dirt, oil or moisture. Lenses are cleaned on a regular schedule. In a slightly dirty environment, the excess gain should be five times more than minimally required for sensor operation.

Moderately dirty – 10x EG

In a ‘moderately dirty’ environment, obvious contamination can be seen on lenses or retroreflectors. These environments are also likely to have periodic washdowns. Moderately dirty environments can be found in heavy industry, food processing, or the automotive industry. For such environments, Banner recommends an excess gain 10 times more than minimally required.

Very dirty – 50x EG

Some environments like those found in foundries, mining operations, tile ovens and outdoors are considered ‘very dirty’. This is because lenses and retroreflectors become heavily contaminated and are subject to minimal cleaning. There may be heavy fog, mist, dust, smoke or oil film in the environment. Banner recommends 50 times more excess gain in these types of environments. However, it is important to note that at excess gains above 50, sensors will begin to see through paper or other materials with a similar optical density.

For more information contact Brandon Topham, RET Automation Controls, +27 (0)11 453 2468, brandon.topham@retautomation.com, www.retautomation.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Condition monitoring to go
Turck Banner Southern Africa Fieldbus & Industrial Networking
Anyone who wants to efficiently monitor the climate in control cabinets will find a comprehensive range of control cabinet monitors for the DIN rail in Turck Banner’s cabinet condition monitoring family.

Read more...
Robust Ethernet cordset series of cables
Turck Banner Southern Africa Enclosures, Cabling & Connectors
Turck Banner offers a product range comprising a wealth of different connectors and cables, including over 115 000 connection technology solutions with differing degrees of complexity.

Read more...
Multicolour strip lights with superior environmental resistance
Turck Banner Southern Africa Electrical Power & Protection
Turck Banner’s industrial LED lighting products are high-quality and energy-efficient lights that provide years of maintenance-free operation, with no bulb or ballast changes required throughout the lifespan of the device.

Read more...
Precision acoustic imagers
Comtest Sensors & Transducers
To help users identify and localise ‘mechanical areas of interest’ within short timeframes, Comtest has added a unique new feature to Fluke’s ii910 precision acoustic imagers.

Read more...
Machine safety, diagnostics and data security
Turck Banner Southern Africa IT in Manufacturing
Personnel safety systems on machines are often seen as a necessary evil. To function correctly, a safety device is required to be self-checking, which adds more complexity and costs compared to a non-safety device.

Read more...
Efficiency and precision with IO-Link sensors
RS South Africa Sensors & Transducers
RS South Africa has its own brand known as RS PRO, which offers a choice of over 88 000 products across all industries and technologies. The guaranteed quality and breadth of this range make RS PRO the smart choice for your business.

Read more...
Smart alternative for float switches
ifm - South Africa Sensors & Transducers
With the LI level sensor, you can reliably detect leakages and point levels on a permanent basis. The capacitive measuring system has no moving parts. Malfunction or maintenance issues due to deposits on the mechanical parts are therefore eliminated.

Read more...
Optical fork sensor series
Gail Norton Instrumentation Sensors & Transducers
The OFS series consists of self-contained optical fork sensors that are housed in a durable, U-shaped aluminum housing, which operates in through-beam mode.

Read more...
Robust Ethernet series of cables and connectors for industrial protection
Turck Banner Southern Africa Enclosures, Cabling & Connectors
Turck Banner offers a product range comprising a wealth of different connectors and cables, including over 115 000 connection technology solutions with differing degrees of complexity.

Read more...
Turck Banner’s marketing communications manager
Turck Banner Southern Africa News
Turck Banner South Africa proudly announces a significant evolution in its marketing leadership. Hennie Blignaut, who has played a pivotal role as marketing manager, is transitioning into a consultancy role. Concurrently, Maxine Wingrove is assuming an expanded role, taking charge of the bulk of the marketing responsibilities.

Read more...