Flow Measurement & Control


Mini oval wheel flowmeter for tight spaces

May 2018 Flow Measurement & Control

Kobold has on offer the DOE oval wheel flowmeter for low and highly viscous liquids. Featuring a full stainless steel body, and temperature measurement for fuel consumption, the DOE offers different pulse output options including one to measure pulsating flow from e.g. peristaltic pumps. It measures liquids of different viscosities, up to 1000 cP, with an accuracy of 1% of reading under reference conditions.

Principle of operation

Oval gear flowmeters are categorised as positive displacement flow technology. When liquid flows through this type of meter, two oval geared rotors measure a constant volume per rotation within a precisely machined measuring chamber. With each rotation, a constant volume of liquid is measured. The rotation of the oval gears is sensed via magnets embedded within the rotors. These magnets transmit a high resolution pulse output. The output signal can be processed externally via a remote display controller or PLC, or via a variety of output/display options available as accessories attached to the flowmeters.

The positive displacement flow technology allows for precise flow measurement of most clean liquids regardless of the media conductivity. Other liquid properties also have a minimal effect on the performance of this type of meter. Flow profile conditioning is not required as with alternative flow technology options making oval gear installations simple to install in tight spaces and at an economical price.

The DOE finds application for all viscous, non-abrasive clean liquids like petroleum, diesel, oil, grease, pastes, chemicals, inks and water. It is also able to measure the fuel consumption of small aircraft, motor boats and mobile power generators. Stainless steel flowmeters are suited to most products and chemicals, whereas the aluminium meters are suitable for fuels, fuel oils and lubricating liquids. Due to an optional measurement of temperature using PT100, even high accuracy fuel consumption measurements are possible. An overview of the instruments main features includes:

• Measuring range: 0,5 l/h - 40 l/min.

• Temperature: max. 100°C.

• Pressure: max. 64 bar.

• Characteristics: Pulse output, integrated Pt100 (fuel consumption measurement).

For more information contact Instrotech, +27 (0)10 595 1831, sales@instrotech.co.za, www.instrotech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Optimisation of alkaline electrolysers
Samson Controls Flow Measurement & Control
his application study relates to the use of a smart meter valve in alkaline electrolysers, and is based on proven experience with one of the biggest hydrogen electrolyser producers in the world. The project proves that the smart meter valve’s added functionality creates an ideal setup in alkaline electrolysers for reducing cost and improving functionality and system performance.

Read more...
Preventing spills and improving operational efficiency
Flow Measurement & Control
In an industry where every spill carries a hefty price tag, Point Energy Partners found that the manual and low-tech systems at their saltwater disposal sites were a significant problem.

Read more...
Wind turbines with smart sensors
Instrotech Motion Control & Drives
The wind’s usable kinetic energy increases with the wind speed. Wind turbines, therefore, use kinetic energy to generate torque and then rotational movement. The rotor, consisting of three rotor blades, ...

Read more...
Infrared camera for condition monitoring and early fire detection
Instrotech Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.

Read more...
Ultracompact mass flow meters with advanced transmitters
Emerson Automation Solutions Flow Measurement & Control
Emerson has introduced the Micro Motion G-Series line of Coriolis mass flow and density meters, the most compact dual-tube Coriolis mass flow meters on the market. They offer the same level of quality and reliability as standard designs, but in a much smaller and lighter form factor.

Read more...
Accurate flowmeter for oil & gas
Endress+Hauser South Africa Flow Measurement & Control
Promass Q, the high-tech Coriolis flowmeter from Endress+Hauser, is now also available for larger pipe sizes with maximum flow rates between 850 and 2400 tph.

Read more...
Pressure monitoring for oil and water tempering machines
Instrotech Pressure Measurement & Control
Temperature plays a significant role in many manufacturing processes. In such cases, a tempering machine is used to maintain the manufacturing process at the desired temperature. Keller supplied PR-21Y piezoresistive pressure transmitters to a client specialising in developing and producing oil and water tempering machines.

Read more...
Optimising CIP processes with precision instrumentation
Endress+Hauser South Africa Flow Measurement & Control
Many food and beverage manufacturers encounter challenges with CIP processes that take too long. Have you considered exploring potential solutions to address these issues?

Read more...
How predictive maintenance will help tackle water scarcity
ABB South Africa Flow Measurement & Control
The water industry is facing increasing pressure to optimise treatment processes and address the impending global water crisis. ABB’s global product line manager, Krishna Prashanth suggests how the integration of smart instrumentation and predictive maintenance can ensure the highest quality treatment of water.

Read more...
Flowmeters with faster and more reliable data transmission
ABB South Africa Flow Measurement & Control
ABB has launched the CoriolisMaster and ProcessMaster flowmeters, which can be powered over the same Ethernet cable used for data transmission, eliminating the need for separate cabling.

Read more...