Temperature Measurement


New Kimo humidity and ­temperature transmitter

September 2017 Temperature Measurement

The new Kimo TH 300 humidity and temperature transmitter has a range from 0–100% RH and from -40 to 180°C. Measuring functions available are relative and absolute humidity, temperature, humidity, dew point and enthalpy.

The device has a large digital display, ABS or ALU (IP65) housing with standard or remote probe in polycarbonate or stainless steel supplied in a wide variety of lengths.

Power supply options are 24 VAC/DC and 115 or 230 VAC. The transmitter can be used to measure in new or existing installations via analog outputs 4–20 mA and 0–10 V, and its numerical outputs RS-232 and RS-485 Modbus.

The measuring ranges, units, channels, outputs and alarms/relays can be configured via keypad or remote control software. Maintenance of the device is easy. The TH 300 probes are interchangeable and can be adjusted individually. They are automatically recognised by the transmitter, which allows quick and easy connection of the probes without stopping the process. The unit can be adjusted onsite via the RS-232 interface and a referenced portable instrument.

For more information contact Anastas Schnippenkotter, ASSTech Process Electronics & Instrumentation, +27 (0)11 708 9200, info@asstech.co.za, www.asstech.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High-precision data loggers for wire and thermocouple probes
Senseca Temperature Measurement
Senseca, formerly the GHM Group, has launched new handheld meter/data loggers for Pt100 four-wire probes and thermocouple probes. These are redesigned with enhanced features.

Read more...
How wet steam undermines boiler efficiency
Endress+Hauser South Africa Temperature Measurement
Endress+Hauser understands the daily challenges and demands placed on energy and utility managers across the spectrum of steam generation, distribution and consumption activities. Its global team is committed to working with its partners to overcome these complexities, and particularly those that aim for a safe, economic and sustainable sitsce of steam energy production and delivery.

Read more...
Dramatically reducing greenhouse emissions
Temperature Measurement
Online teaser: There is considerable potential for reducing CO2 emissions in the mill process by optimising the heat source for drying. The most promising approach to achieving a carbon neutral process in a hot gas generator is the combustion of green hydrogen.

Read more...
Infrared camera for condition monitoring and early fire detection
Instrotech Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.

Read more...
Paint curing applications in the automotive industry
R&C Instrumentation Temperature Measurement
For successful paint cure, irrespective of the paint chemistry being used, there is a critical need to measure and control the temperature of the car body as it travels through the oven. Today, paint ovens are controlled in a sophisticated fashion via thermocouples located in each zone to give constant feedback on the ambient temperature.

Read more...
Universal temperature transmitter with drift detection
WIKA Instruments Temperature Measurement
The new model T38 digital temperature transmitter from WIKA enables extremely flexible and stable temperature measurement. The instrument offers a maximum of sensor connection combinations, and a new type of drift detection.

Read more...
Temperature monitoring in the metal casting process
Instrotech Temperature Measurement
During metal casting, the liquid material is poured into a mould, and after solidification becomes a solid body. Both too-high and too-low casting temperatures can lead to quality defects. The compact Optris PI 05M infrared thermal imaging camera from Instrotech can monitor the casting process.

Read more...
Pyrometer range with enhanced features
Temperature Measurement
AMETEK Land has relaunched its market-leading SPOT pyrometer range with enhanced features and benefits for a wide range of industrial applications. The new SPOT+ family offers a wide range of temperature measurement from 50 to 3500°C, and a choice of different wavelengths for applications including metals, glass, cement and lime kilns, and foundries.

Read more...
Versatile thermal imaging camera
Vepac Electronics Temperature Measurement
The PeakTech 5610 B is a versatile thermal imaging camera with a range of -20 to 400°C, and a thermal resolution of 220x160 thermal pixels, which makes temperature differences easily recognisable for every user.

Read more...
Infrared measurement technology for scrap recycling
Instrotech Temperature Measurement
Instrotech offers fire protection with infrared cameras and IR measurement technology. One application is a shredding facility in a scrap recycling plant that operates unmanned for an extended period and has known risks for starting a fire.

Read more...