NI integrates TSN into the CompactDAQ platform
August 2017
Fieldbus & Industrial Networking
National Instruments has announced the release of two new multislot Ethernet chassis. The cDAQ-9185 and cDAQ-9189 introduce new time-based synchronisation built on the latest Ethernet standards, furthering NI’s efforts in time-sensitive networking (TSN) and rugged CompactDAQ hardware for distributed measurements.
The nature of physical systems test is rapidly changing as measurement systems migrate from the control room closer to the device under test. While this shortens installation time, reduces the cost of sensor wiring and improves measurement accuracy, it creates challenges with synchronisation and systems management, especially using today’s industrial networking technologies. NI is actively working to help define TSN, the next evolution of the IEEE 802.1 Ethernet standard, to deliver distributed time synchronisation, low latency and convergence of time critical and general networking traffic. The cDAQ-9185 and cDAQ-9189 provide tight time synchronisation with TSN to simplify and improve scalability of synchronised, distributed systems.
Features and benefits include:
• Precise synchronised timing over the network, which eliminates the need for lengthy, physical timing cables and ensures tightly synchronised measurements for accurate analysis.
• Simple daisy chaining through an integrated network switch for quick setup and expansion in distributed applications.
• Reliable operation in harsh environments with -40 to 70°C operating temperature range, shock resistance up to 50 g and vibration resistance up to 5 g.
• Software abstraction through the NI-DAQmx driver that automatically synchronises multiple chassis for simple programming.
“These new chassis automatically synchronise measurement data using network-based time. This allows accurate synchronisation over long distances, which greatly simplifies customer setup and systems management of high-channel-count and distributed systems,” said Todd Walter, chief marketing manager of the DAQ and embedded lead user team at NI. “This new, innovative method of synchronisation combined with the signal processing libraries in LabVIEW system design software helps engineers quickly collect and analyse results, which drives faster test completion and higher efficiency.”
With NI’s investment in the latest technologies for synchronisation and communication, the new CompactDAQ chassis are equipped to meet the current and emerging needs of distributed test and measurement applications, delivering high-performance, rugged DAQ systems that can acquire data from highly distributed sensors.
For more information contact National Instruments, +27 (0)11 805 8197, [email protected], www.southafrica.ni.com
Further reading:
EtherCAT interoperability removes industrial networking barriers
Fieldbus & Industrial Networking
Selecting the right communication technology is one of the most important decisions engineers make, and interoperability helps with that decision. Key development tools and standards ensure interoperability among many EtherCAT devices and manufacturers.
Read more...
Condition monitoring to go
Turck Banner Southern Africa
Fieldbus & Industrial Networking
Anyone who wants to efficiently monitor the climate in control cabinets will find a comprehensive range of control cabinet monitors for the DIN rail in Turck Banner’s cabinet condition monitoring family.
Read more...
Affordable building management system product range
Fieldbus & Industrial Networking
Schneider Electric has unveiled its EasyLogic Building Management System range, designed for basic building architectures, to the local marketplace. This is a complete and cost-effective range of field controllers and sensors that are both easy to install and scalable.
Read more...
Flexible EtherCAT communication interface for DALI-2
Beckhoff Automation
Fieldbus & Industrial Networking
The EL6821 EtherCAT Terminal from Beckhoff allows up to 64 DALI/DALI-2 slaves and 64 DALI-2 input devices to be connected. The TwinCAT 3 System Manager makes it easy to configure and parameterise DALI devices flexibly.
Read more...
EtherCAT-based control technology for building automation
Beckhoff Automation
Fieldbus & Industrial Networking
Modern non-residential buildings place many high demands on building automation. This can be optimally implemented with EtherCAT-based control technology from Beckhoff, which provides an efficient central automation architecture thanks to ultra-fast data communication.
Read more...
PC-based control for university studies
Beckhoff Automation
Fieldbus & Industrial Networking
The IDEA box developed at Heilbronn University of Applied Sciences is designed to introduce students to the topic of Industry 4.0 in a simple and practical way. At the core of the corresponding demo case is PC-based control from Beckhoff.
Read more...
A new standard in high-speed Ethernet communication
Fieldbus & Industrial Networking
The TXMC897 module from TEWS Technologies supports a range of Ethernet standards and speeds, making it suitable for diverse applications, including the defence, industrial, and IIoT markets.
Read more...
Data-driven battery production
Turck Banner Southern Africa
Fieldbus & Industrial Networking
The availability of high-performance batteries at moderate prices is one of the most important factors for the success of electromobility. As a long-standing automation partner to the automotive industry, Turck Banner supports the major battery manufacturers with its know-how.
Read more...
Bring critical temperature data to your condition monitoring system
Turck Banner Southern Africa
Fieldbus & Industrial Networking
Data conversion just got easier. Turck Banner converters are compact, simple add-ons that seamlessly fit into your factory applications. You can take various types of signals such as discrete, analogue and many others, and convert them to protocols like IO-link, PICK-IQ, PWM/PFM, and Modbus.
Read more...
Case History 190: Measurement problem ruins level control.
Michael Brown Control Engineering
Editor's Choice Fieldbus & Industrial Networking
The widely held belief in many plants that tuning will solve all base layer control problems is completely fallacious. Bad tuning is generally not the main reason for loops to perform badly. It is important when performing optimisation that all elements in a loop are considered, in addition to the control strategy, before even thinking of tuning.
Read more...
printer friendly version