Valves, Actuators & Pump Control


Ticona solves tricky situation with ball sector valve

May 2017 Valves, Actuators & Pump Control

When an expensive control valve breaks down after three months only, a remedy is needed badly. But resin producer Ticona had to live with this situation for a considerable time due to its extraordinary production process. Thinking outside the box was the way out. Using an ‘exotic’ ball sector valve not only solved the problem, but also saved money.

The control valve was ready for scrapping after only three months, not some cheap plug valve made from low-quality steel, but rather a valve made from high-quality Hastelloy C. This situation could not be tolerated for long, but the harsh conditions in fibre enforced plastic production at Ticona meant that abrasion and corrosion occurred on the body, tapered seat or plug after only a short time, leading to total failure. Lift valves of the type used until the 1980s could not be considered because of the emissions regulations in ‘TA-Luft’. Thomas Labahn, the person responsible for plant planning and EMC at Ticona, took a look at the problem. This explains why he was very interested in a ball sector valve that he saw during a plant tour of the valve manufacturer Schubert & Salzer. “As soon as they explained the control valve to me, a light went on in my head,” is how Labahn describes his Eureka moment.

Ticona conducted a parallel test of a ball sector valve from Schubert & Salzer and one from another manufacturer. The latter valve lasted precisely three weeks before seizing up. The Schubert & Salzer valve on the other hand, lasted the distance. “The very first attempt was a major success. The valve lasted nearly 10 months, almost three times as long as before,” explains Labahn. The trick: the valve is made from standard material (stainless steel) and only has hard chrome-plated (stellited) ball sector surfaces. This is the reason why it is significantly less expensive than the previous valve made from Hastelloy. Furthermore, the damaged valve can be repaired and even costs a good deal less to buy than does the original plug valve. Considering the numerous control functions in which these valves are used at Ticona, under extremely challenging conditions, the saving potential is quite considerable.

A small actuator is sufficient

After 10 months in operation, only the holder of the seat ring had come loose, and the manufacturer is already working on a solution to this problem with an improved variant. “The media flows through the ball sector element in a totally different way than in the plug valve,” explains Labahn. “In future, completely stellated valves are expected to offer even greater improvements.”

Other important aspects in favour of using ball sector valves are their comparably light weight and relatively low actuator thrusts. The friction against the stuffing box seal in plug valves means they have a very high break-loose torque and this explains why they need powerful actuators. The torque with the ball sector valve, on the other hand, is relatively low and the actuators can be correspondingly smaller.

Furthermore, the valve does not get blocked because the entire pipe cross section is left unobstructed when the ball sector is fully open. The fibre enforced plastics manufacturer is also happy when it comes to the control response: “In our case, the control accuracy that has been achieved is comparable to that of the plug valve we used to use,” concludes Labahn.

Principle of the ball sector valve

The ball sector valve consists of a hemispherical shell – the ball sector – that is held securely in the valve body using two large bearing stems. Part of the hemispherical shell is used for isolating, while the other has a hole with a diameter corresponding to about 80% of the nominal size of the valve. The ball sector is turned through about 90o from fully open to closed. The shape of the opening cross section changes from completely round to elliptical in this case. This practically round shape for the flow opening reduces the risk of blockage when small control settings are made.

For more information contact Rowan Blomquist, Macsteel Fluid Control, +27 (0)11 383 4000, rowan.blomquist@macfluid.co.za, www.macsteel.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact valve position indicator
Emerson Automation Solutions Valves, Actuators & Pump Control
Emerson’s new TopWorx DVR Switchbox is an entry-level addition to the DV Series of valve position indicators. It combines a durable resin enclosure, compact size, and a patented cam design that provides a reliable valve position feedback for water and wastewater systems, food and beverage production lines, and industrial utilities.

Read more...
Case History 191: The weakest link.
Michael Brown Control Engineering Valves, Actuators & Pump Control
Which is the weakest link in a control loop? The answer, without any doubt is that, in most cases, the final control element is the weakest link.

Read more...
High-flow solenoid valve
Emerson Automation Solutions Valves, Actuators & Pump Control
Emerson has introduced the new ASCO Series 327C solenoid valve, which features a direct-acting, high-flow design that provides superior flow-to-power ratio. It permits high flows at minimum power levels, making it ideal for use in power plants, refineries, and chemical processing facilities.

Read more...
Selection of two-port valves: an open and shut case
SMC Corporation South Africa Valves, Actuators & Pump Control
Little consideration is generally given to two-port valves because they are often perceived as simple devices that only open and close to control downstream fluid supply. Although this is mechanically true, choosing the optimal two-port valve for your application can make a big difference, saving space, weight and energy consumption.

Read more...
Emerson software optimises maintenance
Emerson Automation Solutions Valves, Actuators & Pump Control
Emerson has announced the Plantweb Insight Valve Health Application, a powerful software tool that combines Fisher control valve expertise with advanced analytic algorithms. The new app makes it possible for users to visualise an entire connected fleet of valves, while prioritising actions based on the health index of each valve.

Read more...
New-generation vacuum pumps
Valves, Actuators & Pump Control
Busch Vacuum Solutions has introduced the new MINK MM dry claw vacuum pumps. This new generation stands out for its minimal operating costs, low energy consumption and reduced CO2 footprint through reduced raw material requirements.

Read more...
Noise solutions for valves
Valves, Actuators & Pump Control
Emerson has announced its innovative new Fisher Whisper Trim technology for use in both rotary and globe valves. This next generation of technology addresses noise issues by using additive manufacturing to create trim designs with increased capabilities.

Read more...
Valves for severe service
Valve & Automation Editor's Choice Valves, Actuators & Pump Control
Valve specialist, Valve & Automation supplies total valve and control solutions to a wide range of key process industries across southern Africa. Chemicals and pulp and paper are top of its list of industries with demanding process conditions.

Read more...
Pinch valves for efficient flow control
Bearing Man Group t/a BMG Valves, Actuators & Pump Control
Included in BMG’s extensive portfolio of industrial slurry valves is a range of pinch valves, which have been developed to control the flow of liquids, powders, solids and abrasives in many industries.

Read more...
Valmet to deliver valve solutions to Sibanye-Stillwater’s lithium refinery
Valves, Actuators & Pump Control
Valmet will deliver a comprehensive package of critical valves and valve automation solutions to a lithium project run by Sibanye-Stillwater’s subsidiary, Keliber Oy in Kokkola, Finland.

Read more...