IS & Ex


Safety light curtains

April 2017 IS & Ex

In all applications with dangerous areas requiring finger, hand and operator protection, the small and powerful safety light curtains and light grids from ifm are the first choice. The main differences between the versions from the OY series are the resolution and the protected area height. Various functions such as range and restart are configured directly on the unit, so no PC is required. A t-slot on the back allows simple and reliable mounting using the supplied mounting material. The various accessories make low-cost and efficient use easier.

The OY type curtain comes in a very small housing 28 mm x 30 mm in size and can be installed without dead band. Selectable ranges are available from up to 20 m for light curtains and up to 60 m for light grids with easy tried-and-tested M12 connection.

Applications include:

Hand and finger protection: For light curtains of type OYxxxS, an effective protection is reached by the small distances between light beams starting with 14 mm. Typical applications are presses, pick-and-place machines or handling machines. For hygienic areas, versions with protection rating IP69K are required.

Blanking: This suppresses individual light beams or up to three neighbouring light beams. Floating blanking also allows different beams to be suppressed.

Muting: The temporary automatic muting function allows feeding of products to the dangerous area.

Safety in cleaning processes with steam and high pressure cleaners is achieved by the enclosure of the safety light grid in a protective IP69K tube with integrated heating protection against fogging.

For more information contact ifm electronic SA, 086 143 6772, info.za@ifm.com, www.ifm.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cathodic protection system for hazardous environments
Omniflex Remote Monitoring Specialists IS & Ex
When NSW Ports in Australia embarked on a two-year programme to rehabilitate the structures and combat corrosion levels at its Bulk Liquid Berth 1, it commissioned Melbourne-based consultancy Infracorr to deliver a bespoke cathodic protection) system. To deliver the system safely, Infraccor engaged cathodic protection specialist Omniflex to support the hazardous area and remote monitoring aspects of the CP system design.

Read more...
ifm South Africa celebrates new warehouse
ifm - South Africa News
ifm South Africa recently celebrated the launch of its new warehouse.

Read more...
Smart alternative for float switches
ifm - South Africa Sensors & Transducers
With the LI level sensor, you can reliably detect leakages and point levels on a permanent basis. The capacitive measuring system has no moving parts. Malfunction or maintenance issues due to deposits on the mechanical parts are therefore eliminated.

Read more...
Versatile cylinder monitoring
ifm - South Africa Pneumatics & Hydraulics
This IO-Link cylinder sensor from ifm, with two configurable hardware outputs, will upgrade your machine in no time.

Read more...
Always keeping an eye on the measured values
ifm - South Africa Electrical Power & Protection
Despite growing digitalisation, there are still many situations where analogue measured values such as the level in a tank or the temperature of a climatised room must be directly readable in the control cabinet or at the control desk. The current loop display is designed for precisely this purpose.

Read more...
Powerful and versatile IIoT controller
ifm - South Africa PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.

Read more...
Leading the way in PDS technology
IS & Ex
Booyco Electronics, an original equipment manufacturer specialising in mine safety equipment, has witnessed a surge in demand for its proximity detection systems (PDS) and collision prevention systems (CPS) since the Mine Health and Safety regulation focusing on trackless mobile machinery was promulgated. These systems offer crucial vehicle-to-pedestrian and vehicle-to-vehicle detection capabilities.

Read more...
Ensuring lone worker safety
IS & Ex
The Conextivity Group’s startup – Wearin’ – has developed a solution connecting the lone worker with the control centre. This was commissioned by concrete producer, Pro Beton to ensure the safety of its teams of machine operators and cleaners working on production sites during the day, night, and weekends.

Read more...
Powerful and versatile IIoT controller
ifm - South Africa PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.

Read more...
New generation of innovative photoelectric distance sensors
ifm - South Africa Sensors & Transducers
Thanks to innovative photonic mixer device (PMD) technology, the OGD photoelectric distance sensor from ifm detects objects with extreme precision up to a range of 2 metres.

Read more...