Monitoring temperature and position in owner-driver fleets

Temperature Measurement

September 2016 Temperature Measurement

Curafin Management Company runs owner-driver programmes countrywide and some of its clients require temperature monitoring of the cargo they transport. AWE Telemetry Systems has proposed the following solution:

• GENET GSM/GPS tracking device.

• 1 x I/O to monitor the return air temperature of the cooling unit fitted in the vehicles.

• 1 x I/O to control the remote immobilisation of the vehicle via the GSM Network.

• Real-time alerts of temperature set-point violations.

• Monthly exception reporting of temperature set-point violations.

Temperature and positional data are relayed in near real-time via GPRS to the AWE Telemetry Systems cloud servers. Out of range temperature readings trigger exception notifications that can be delivered via email or SMS. On-device temperature monitoring also allows for SMS alerts to be sent directly from the installed device.

This is useful because when signal level is low GPRS may not be available and an SMS can be sent at a lower signal level. In the AWE Telemetry Systems portal, each delivery trip can be plotted online and a per-trip temperature plot can be generated for proof of compliance reporting. Trip and temperature data are also made available via an HTTP-based RESTful API.

For more information contact Jason Tarr, AWE Telemetry Systems, +27 (0)73 171 2539, [email protected], www.awetelemetry.com

Share this article:

How wet steam undermines boiler efficiency
Endress+Hauser South Africa Temperature Measurement
Endress+Hauser understands the daily challenges and demands placed on energy and utility managers across the spectrum of steam generation, distribution and consumption activities. Its global team is committed to working with its partners to overcome these complexities, and particularly those that aim for a safe, economic and sustainable sitsce of steam energy production and delivery.

Read more...

Dramatically reducing greenhouse emissions
Temperature Measurement
Online teaser: There is considerable potential for reducing CO₂ emissions in the mill process by optimising the heat source for drying. The most promising approach to achieving a carbon neutral process in a hot gas generator is the combustion of green hydrogen.

Read more...

Infrared camera for condition monitoring and early fire detection
Instrotech Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.

Read more...

Paint curing applications in the automotive industry
R&C Instrumentation Temperature Measurement
For successful paint cure, irrespective of the paint chemistry being used, there is a critical need to measure and control the temperature of the car body as it travels through the oven. Today, paint ovens are controlled in a sophisticated fashion via thermocouples located in each zone to give constant feedback on the ambient temperature.

Read more...

Universal temperature transmitter with drift detection
WIKA Instruments Temperature Measurement
The new model T38 digital temperature transmitter from WIKA enables extremely flexible and stable temperature measurement. The instrument offers a maximum of sensor connection combinations, and a new type of drift detection.

Read more...

Temperature monitoring in the metal casting process
Instrotech Temperature Measurement
During metal casting, the liquid material is poured into a mould, and after solidification becomes a solid body. Both too-high and too-low casting temperatures can lead to quality defects. The compact Optris PI 05M infrared thermal imaging camera from Instrotech can monitor the casting process.

Read more...

Pyrometer range with enhanced features
Temperature Measurement
AMETEK Land has relaunched its market-leading SPOT pyrometer range with enhanced features and benefits for a wide range of industrial applications. The new SPOT+ family offers a wide range of temperature measurement from 50 to 3500°C, and a choice of different wavelengths for applications including metals, glass, cement and lime kilns, and foundries.

Read more...

Temperature Measurement

Monitoring temperature and position in owner-driver fleets

Further reading:

Published by Technews