Tofino Xenon for the energy sector
July 2016
Fieldbus & Industrial Networking
Belden has announced that the Tofino Xenon Industrial Security Appliance now supports two of the most widely used energy-specific communication protocols. This new solution reduces the time and resources required to protect energy power generation and transmission substations from cyber security threats.
The unit provides an advanced industrial solution that solves many of the most challenging energy-specific cyber and physical security challenges. The easy-to-deploy appliance protects against malicious and unauthorised access, improves scada system reliability, provides greater security control for ICS devices, and supports more industrial protocols than many other devices available. It meets security standards from the International Society of Automation’s (ISA) IEC-62443 program, as well as the North American Electric Reliability Corporation’s Critical Infrastructure Protection (NERC CIP) requirements, version five and the new version six standards. It also meets the Department of Homeland Security’s directive to isolate mission-critical systems so that unsafe network protocols are not allowed.
“Protecting the critical infrastructure that drives our nation’s substations and power generation systems requires an industrial-focused solution,” said Rekha Shenoy, vice president and general manager of cyber security for Belden. “Belden is uniquely positioned to deliver cyber security solutions designed to address the requirements of special purpose networks in the energy industry.”
According to the Department of Homeland Security, the cyber attacks against the energy sector are increasing. ICS-CERT has found that more of these attacks are making it through to the control layer of energy networks. Attacks against the control layer can allow attackers to compromise the reliability, availability and safety of mission-critical infrastructure. The North American Electric Reliability Corporation’s Critical Infrastructure Protection (NERC CIP) standard is being used to protect IT systems on energy sector networks. However, the power generation and transmission substations on special purpose networks require a purpose-built cyber security solution.
The Tofino Xenon Industrial Security Appliance is a versatile rugged device that ensures maximum data protection for production energy systems as part of a defence in-depth strategy. The appliance is ideal for control professionals because it is designed to be installed in a live network with:
• No pre-configuration.
• No network changes.
• No plant downtime.
In addition, the solution is easy for operations and maintenance staff to install and operate; no specialised information technology training is required.
This release of the Tofino Xenon Industrial Security Appliance is part of Belden’s cyber security initiative. The initiative brings together three trusted Belden brands – Tripwire, Tofino Security and GarrettCom – to form comprehensive industrial cyber security solutions. These solutions will eventually encompass all Belden brands and deliver solutions designed to protect all layers of industrial systems, including networks, controllers and endpoints.
For more information contact Fons de Leeuw, Profitek, +27 (0)12 345 6544, sales@profiteksa.com, www.profiteksa.com
Further reading:
EtherCAT interoperability removes industrial networking barriers
Fieldbus & Industrial Networking
Selecting the right communication technology is one of the most important decisions engineers make, and interoperability helps with that decision. Key development tools and standards ensure interoperability among many EtherCAT devices and manufacturers.
Read more...
Condition monitoring to go
Turck Banner Southern Africa
Fieldbus & Industrial Networking
Anyone who wants to efficiently monitor the climate in control cabinets will find a comprehensive range of control cabinet monitors for the DIN rail in Turck Banner’s cabinet condition monitoring family.
Read more...
Affordable building management system product range
Fieldbus & Industrial Networking
Schneider Electric has unveiled its EasyLogic Building Management System range, designed for basic building architectures, to the local marketplace. This is a complete and cost-effective range of field controllers and sensors that are both easy to install and scalable.
Read more...
Flexible EtherCAT communication interface for DALI-2
Beckhoff Automation
Fieldbus & Industrial Networking
The EL6821 EtherCAT Terminal from Beckhoff allows up to 64 DALI/DALI-2 slaves and 64 DALI-2 input devices to be connected. The TwinCAT 3 System Manager makes it easy to configure and parameterise DALI devices flexibly.
Read more...
EtherCAT-based control technology for building automation
Beckhoff Automation
Fieldbus & Industrial Networking
Modern non-residential buildings place many high demands on building automation. This can be optimally implemented with EtherCAT-based control technology from Beckhoff, which provides an efficient central automation architecture thanks to ultra-fast data communication.
Read more...
PC-based control for university studies
Beckhoff Automation
Fieldbus & Industrial Networking
The IDEA box developed at Heilbronn University of Applied Sciences is designed to introduce students to the topic of Industry 4.0 in a simple and practical way. At the core of the corresponding demo case is PC-based control from Beckhoff.
Read more...
A new standard in high-speed Ethernet communication
Fieldbus & Industrial Networking
The TXMC897 module from TEWS Technologies supports a range of Ethernet standards and speeds, making it suitable for diverse applications, including the defence, industrial, and IIoT markets.
Read more...
Data-driven battery production
Turck Banner Southern Africa
Fieldbus & Industrial Networking
The availability of high-performance batteries at moderate prices is one of the most important factors for the success of electromobility. As a long-standing automation partner to the automotive industry, Turck Banner supports the major battery manufacturers with its know-how.
Read more...
Bring critical temperature data to your condition monitoring system
Turck Banner Southern Africa
Fieldbus & Industrial Networking
Data conversion just got easier. Turck Banner converters are compact, simple add-ons that seamlessly fit into your factory applications. You can take various types of signals such as discrete, analogue and many others, and convert them to protocols like IO-link, PICK-IQ, PWM/PFM, and Modbus.
Read more...
Case History 190: Measurement problem ruins level control.
Michael Brown Control Engineering
Editor's Choice Fieldbus & Industrial Networking
The widely held belief in many plants that tuning will solve all base layer control problems is completely fallacious. Bad tuning is generally not the main reason for loops to perform badly. It is important when performing optimisation that all elements in a loop are considered, in addition to the control strategy, before even thinking of tuning.
Read more...
printer friendly version