Motion Control & Drives


Enhanced compressor efficiency with frequency converters

February 2016 Motion Control & Drives

Tectra Automation recently supplied Bosch Rexroth frequency converters to two Gauteng companies aiming to reduce their energy consumption and operational expenditure through more efficient, on-demand motor performance.

With electric motors the single biggest consumers of power within industrial automation, more and more companies are implementing measures to overcome the costly peaks in consumption that can increase the electrical cost of that unit by up to seven times its operating current.

One such company is a packaging manufacturer in Johannesburg. Tectra Automation supplied a 160 kW Type Fe frequency converter in November 2014, to drive the company’s 75 kW air compressor in an open loop.

“Analysing the pre- and post-installation readings, indicated that the plant had shed over 100 kVA of its power load during normal operation after we had installed the frequency converters,” explains Georg Venter, product manager, Tectra Automation.

This was a relatively straightforward installation that merely drove the motor connected to a pressure switch. A second company, a steel producer in Kliprivier, acquired an additional pneumatic component to drive its 30 kW air compressor.

“We supplied a pressure transducer in a closed loop circuit that will provide even greater efficiency in the way the motor is used. It responds to the requirements of the accumulator proportionally, relative to the pressure inside,” explains Venter. “The pressure transducer, from our range of Aventics pneumatic components, is part of our turnkey drive solutions for air compressors.”

Tectra Automation deliberately oversized the electrical panel it had built for this customer, as the company plans to fit a second VSD for their second compressor at a future date.

In addition to curtailing the sudden power spikes associated with overcoming motor inertia, the frequency converters also reduce the mechanical stress exerted within the system, thus prolonging the life of the affected mechanical components.

Bosch Rexroth frequency converters Type FE for motors from 750 W to 160 kW, provide a simple, accurate and reliable three-phase drive control solution for AC motors.

For more information contact Georg Venter, Tectra Automation, +27 (0)11 974 9400, georg.venter@tectra.co.za, www.tectra.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Why artificial intelligence matters in robotic technology
Motion Control & Drives
Andrew Crackett, managing director of Yaskawa Southern Africa, gives his insight into the role of AI in robotics technology, with its advantages and challenges, and makes predictions for the future.

Read more...
ISO fluid cleanliness codes for hydraulic and lubrication systems
Motion Control & Drives
When setting target ISO fluid cleanliness codes for hydraulic and lubrication systems, it is important to keep in mind the objectives that need to be achieved.

Read more...
Automating precision tasks
igus Motion Control & Drives
A new low-cost modular robotics kit from motion plastics manufacturer, igus, makes automation extremely easy and affordable for manufacturing companies in South Africa.

Read more...
Ball screws for electric injection moulding machines
Motion Control & Drives
NSK is introducing an advanced high-speed, heat-resistant version of its ball screws for high-load drive applications. This innovative new product is ideal for electric injection moulding machines tasked with manufacturing high-cycle, thin-wall products in short cycle times.

Read more...
The world’s greatest model railway
Horne Technologies Motion Control & Drives
Located in Hamburg’s traditional warehouse district, Speicherstadt features the largest model railway in the world, and is one of the most exciting tourist attractions in Germany.

Read more...
High strength bolting solutions
Bearing Man Group t/a BMG Motion Control & Drives
BMG’s Nord-Lock Expander System pivot pin components offer dependable solutions that combat the challenges of lug wear in the marine and shipping sector.

Read more...
Ocean-floor seismometer
Horne Technologies Motion Control & Drives
Geophysicists depend on seismometers to monitor earthquakes generated by the motion of tectonic plates. In order to function, the instruments need to be levelled prior to operation. To achieve this, Canadian seismic specialist, Nanometrics combines sophisticated gimbals and microprocessors with ultra-reliable, efficient stepper motors from Faulhaber.

Read more...
Power transmission solutions for tough industries
Bearing Man Group t/a BMG Motion Control & Drives
BMG’s Regal Rexnord Falk product range, which encompasses industrial gear units, low-speed backstops, couplings, bearings, and chain conveying solutions, is designed to minimise ownership costs and maximise the productivity of capital equipment investments.

Read more...
New powerful servo drives for precision applications
Motion Control & Drives
Motion control specialist, Aerotech is launching two new digital PWM drives. The slimline single and multi-axis servo motor drives are designed for use with Aerotech’s Automation1 platform, and offer a lower price compared to Aerotech’s higher performance drives.

Read more...
It’s all in the bearings
Bearing Man Group t/a BMG Motion Control & Drives
Bearings are key components for the efficient and reliable operation of any equipment that involves rotating shafts or accurate movement. BMG Bearings Division offers a comprehensive range of bearings throughout southern Africa, including ball, roller, and linear bearings.

Read more...