The new encoders from ifm electronic offer a real alternative to traditional photoelectric encoders. This is a result of their magnetic operating principle, in combination with unique signal evaluation supported by powerful microcontrollers. With extended, intelligent functions, they are flexible enough to suit a range of applications in the field of motion control. Unique features include the display, operating keys and user-friendly parameter setting and diagnostics via IO-Link.
Firstly, they can be used as incremental encoders. The resolution between 2 and 10 000 pulses/revolution can be freely set. The units can also be used as counters. The direction of counting (up/down) and the switch points can also be selected. The third operating mode is used for rotational speed monitoring. The user sets a rotational speed range. The outputs switch when the current value is above or below the limit values, allowing the encoders to operate automatically as rotational speed or standstill monitoring systems.
All functions and parameters can be set on the unit via pushbuttons and LED display. During operation the current pulse, count or rotational speed values are displayed according to the set mode. Red or green LEDs immediately indicate if the machine is in the acceptable range or if limit values have been exceeded. Furthermore, the display can be rotated electronically by 180°, allowing flexible installation positions. Parameters can be set directly on the encoder or through a user-friendly IO-Link. The high shock and vibration resistance enables use in harsh environments. The cable entry or the rotatable M12 connection for connector units can be used both radially and axially. The selection of the suitable encoder is reduced to the matching flange and shaft. Everything else can be freely configured by the user. ifm also offers a basic encoder version for use when the pushbuttons and display are not required. This version can also be set completely via IO-Link.
Precision acoustic imagers Comtest
Sensors & Transducers
To help users identify and localise ‘mechanical areas of interest’ within short timeframes, Comtest has added a unique new feature to Fluke’s ii910 precision acoustic imagers.
Read more...Efficiency and precision with IO-Link sensors RS South Africa
Sensors & Transducers
RS South Africa has its own brand known as RS PRO, which offers a choice of over 88 000 products across all industries and technologies. The guaranteed quality and breadth of this range make RS PRO the smart choice for your business.
Read more...Smart alternative for float switches ifm - South Africa
Sensors & Transducers
With the LI level sensor, you can reliably detect leakages and point levels on a permanent basis. The capacitive measuring system has no moving parts. Malfunction or maintenance issues due to deposits on the mechanical parts are therefore eliminated.
Read more...Versatile cylinder monitoring ifm - South Africa
Pneumatics & Hydraulics
This IO-Link cylinder sensor from ifm, with two configurable hardware outputs, will upgrade your machine in no time.
Read more...Optical fork sensor series Gail Norton Instrumentation
Sensors & Transducers
The OFS series consists of self-contained optical fork sensors that are housed in a durable, U-shaped aluminum housing, which operates in through-beam mode.
Read more...Always keeping an eye on the measured values ifm - South Africa
Electrical Power & Protection
Despite growing digitalisation, there are still many situations where analogue measured values such as the level in a tank or the temperature of a climatised room must be directly readable in the control cabinet or at the control desk. The current loop display is designed for precisely this purpose.
Read more...Powerful and versatile IIoT controller ifm - South Africa
PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.
Read more...In-line process transmitter to optimise sterile processes WIKA Instruments
Sensors & Transducers
The new model DMSU22SA in-line process transmitter from WIKA helps to optimise sterile processes in the pharmaceutical and food industries, with less energy consumption, less cleaning effort ,and more safety.
Read more...Automated clean-in-place Endress+Hauser South Africa
Sensors & Transducers
A clean-in-place (CIP) process is integral to a food and beverage producer’s responsibility to deliver safe, high-quality products to consumers. However, as industries worldwide shift focus towards sustainability, CIP procedures face new challenges.