Level Measurement & Control


Kobold’s potentiometric measuring technique for viscous media

May 2015 Level Measurement & Control

Kobold Instrumentation has introduced the Kobold LNP continuous level probe based on the potentiometric measuring technique for viscous, sticky media. The instrument can be used for continuous level measurement even in low conductivity liquids.

The Kobold level probes LNP serve for continuous level measurement of liquids with negligible conductivity. Levels in vessels containing viscous, pasty or sticky media can be measured accurately using this new potentiometric method of measurement. It is most suitable for use in small vessels and for measuring fill heights greater than 200 mm.

The probe consists of a head mounted transmitter that makes an electrically isolated 4-20 mA analog output signal available. The probe can be mounted from the top or bottom and the output signal is automatically positionally accurate. Single stem probes can be used in metallic vessels where the tank wall is parallel to the stem. The devices with the weld-in sleeve form a hygienic measuring point which is cavity free and ideally suited for CIP/SIP cleaning.

The measuring principle – a defined potentiometer in the form of a stem is immersed in the medium. Thus a measuring bridge is created to the side of the tank or to the ground stem. The resistance of the measuring bridge changes in proportion to the level. In opp­osition with the classic potentiometer, the contact with the liquid is not at a certain point, but along the entire length of the immersed probe. Additional features include:

• Stem length: 200-2000 mm.

• Accuracy: 1% of stem length.

• P max: 10 bar; t max: 50°C (short-time 150°C).

• Food compatible materials stainless steel and PEEK.

• 8-digit LED-chain trend display.

• 7-point linearity function for volume calibration.

For more information contact Pieter Deysel, Instrotech, +27 (0)10 595 1831, sales@instrotech.co.za, www.instrotech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cloud-based inventory management software
Endress+Hauser South Africa Level Measurement & Control
Netilion is an award-winning cloud-based IIoT ecosystem designed for industrial processes. It connects the physical and digital worlds to send valuable information from the field straight to your phone, tablet or other device.

Read more...
Level sensing, conveyor control and grid resistors
DRH Components Editor's Choice Level Measurement & Control
DRH Components is a specialist electric component and systems supplier with a focus on the control of electric motors. As part of its wide variety of products, the company markets the entire Bindicator range. Bindicator manufactures sensors for dry bulk and liquid level measurement.

Read more...
Wind turbines with smart sensors
Instrotech Motion Control & Drives
The wind’s usable kinetic energy increases with the wind speed. Wind turbines, therefore, use kinetic energy to generate torque and then rotational movement. The rotor, consisting of three rotor blades, ...

Read more...
Infrared camera for condition monitoring and early fire detection
Instrotech Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.

Read more...
Pressure monitoring for oil and water tempering machines
Instrotech Pressure Measurement & Control
Temperature plays a significant role in many manufacturing processes. In such cases, a tempering machine is used to maintain the manufacturing process at the desired temperature. Keller supplied PR-21Y piezoresistive pressure transmitters to a client specialising in developing and producing oil and water tempering machines.

Read more...
Level measurement under extreme plant processing conditions
VEGA Controls SA Level Measurement & Control
Level measurement in LNG and LPG processes is about answering the simple question: “How much product is in the tank?” However, obtaining an exact value is not easy. The products are often under pressure, cryogenic, and highly explosive. Sensors from Vega have been operating successfully in all stages of the LNG/LPG process for many years.

Read more...
Temperature monitoring in the metal casting process
Instrotech Temperature Measurement
During metal casting, the liquid material is poured into a mould, and after solidification becomes a solid body. Both too-high and too-low casting temperatures can lead to quality defects. The compact Optris PI 05M infrared thermal imaging camera from Instrotech can monitor the casting process.

Read more...
Grounding of hydrostatic level sensors
WIKA Instruments Level Measurement & Control
Hydrostatic level sensors are very often installed in outdoor applications, primarily in the water and wastewater industries. A good connection to ground is essential when installing hydrostatic level sensors, since no grounding or poor grounding can result in destruction or damage to the level sensor.

Read more...
Interference-resistant pressure transmitters
Instrotech Pressure Measurement & Control
Instrotech offers a pressure transmitter from Keller for temperature compensation and protection from electromagnetic fields (EMC) in the recently approved 21Y Series.

Read more...
Cone penetration testing
Instrotech Pressure Measurement & Control
Everyone has walked along a wet beach at some time and noticed how the damp sand wobbles like jelly when stepped on several times. This may be fun on a beach, but it’s no joke at a construction site or in an earthquake. Houses and streets built on drained swampland or unconsolidated soil or sediment can sink in certain situations, after which they must be condemned for use.

Read more...