Reliable flame detection

June 2014 Analytical Instrumentation & Environmental Monitoring

Durag’s D-LX 200 compact flame monitor is a failsafe, self-monitoring device that meets the highest international safety standards and regulations for continuous operation. Its dual channel design eliminates the need to interrupt the photoelectric current, with no need for electrical and mechanical shutters. The D-LX 200 is available with safety integrity Level 3 (SIL 3) certification.

The compact flame monitor is designed for continuous operation in large power stations, heating plants, chemical processes, incineration plants, rotary kilns and cement plants. The system reliably detects flames from all fuels, particularly gas, oil, coal and wood, as well as various combustion processes. The high sensitivity and ambient temperature ranges enable the flame monitor to be used in the most diverse environments. The flame radiation is converted into an electrical flame signal by a highly sensitive photodiode. Different photodiodes allow for effective conversion of the flame radiation from various fuels and burner types (UAF, UA and IG versions). D-LX 200 has an ambient temperature range from -40 to 85°C and separate thresholds for flame intensity and flicker frequency. Two ranges are available with selectable parameters. It is possible to switch between these ranges externally so that the flame monitor can easily be adjusted to different combustion conditions.

Communication is via Modbus RTU (RS-485) or IrDA. The settings and flame signal are directly visible via LEDs and switch settings. All D-LX 200 types are available as models for use with fibre-optic systems (D-LX 720) and the connection flange is compatible with Durag’s D-LE 603 or D-LX 100 flame monitors.

For more information contact Mike Andrews, OEN Enterprises, +27 (0)11 675 4447, mike@oenenterprises.co.za, www.oenenterprises.co.za

Further reading:

Ensuring occupational health and safety in mining
Analytical Instrumentation & Environmental Monitoring
Probe Integrated Mining Technologies (Probe IMT) has partnered with M3SH Technology to offer state-of-the-art environmental monitoring solutions that address these dual requirements.

Read more...

---

Sustainability of surface water
Endress+Hauser South Africa Analytical Instrumentation & Environmental Monitoring
The sustainability of surface water is critical for South Africa’s economic development, social well-being and environmental health. Endress+Hauser has a full range of liquid analysis sensors and transmitters to measure important parameters and has an excellent global track record in water and wastewater process plants and various surface and industrial water monitoring sites.

Read more...

---

Keeping an eye on invisible radiation
Omniflex Remote Monitoring Specialists Analytical Instrumentation & Environmental Monitoring
At its peak in 1994, the energy generation capacity of the UK’s nuclear power stations was 12,7 GW across 16 plants. In 2024, the capacity has fallen to around 5 GW, and the number of stations is down to nine. However, this is far from the end of the story as spent nuclear fuel remains radioactive for centuries, and requires rigorous safety processes to safeguard against leaks.

Read more...

---

Effective dust control in sugar processing
Analytical Instrumentation & Environmental Monitoring
BLT WORLD specialists work in conjunction with the global ScrapeTec team to offer dependable solutions for specific problems at the transfer points of conveyor systems in many industries where dust and material spillage are concerns, including the sugar sector.

Read more...

---

A benchmark for lubricant reliability in mining
Analytical Instrumentation & Environmental Monitoring
According to Craig FitzGerald from ISO-Reliability Partners, mines can save R500 000 or more on their yearly mill cleaning costs, while electricity consumption can be reduced by up to 12%, and lubricant consumption lowered up by up to 60% when using Bel-Ray Clear Gear lubricant.

Read more...

---

Safeguarding precision in industrial radiometric measurements
Mecosa Analytical Instrumentation & Environmental Monitoring
In the complex landscape of industrial plant operations, precision is paramount, especially when it comes to weld inspections to test for structural integrity of pipes. Berthold has the ideal answer to this challenge – X-Ray Interference Protection.

Read more...

---

New indoor air quality monitor
RS South Africa Analytical Instrumentation & Environmental Monitoring
RS South Africa has available a new indoor air quality (IAQ) monitor that provides continuous, easy-to-read, and accurate real-time monitoring of air quality in indoor environments.

Read more...

---

A quick guide to disinfection
Endress+Hauser South Africa Analytical Instrumentation & Environmental Monitoring
The distribution system in a drinking water network provides a reliable supply of high-quality water to consumers. Endress+Hauser’s range of robust, low-maintenance sensors are ideal for monitoring disinfectant levels in the water.

Read more...

---

Multi-parameter measuring system for water quality monitoring
KROHNE Analytical Instrumentation & Environmental Monitoring
Monitoring different parameters in water treatment processes can lead to a situation where different measuring points are scattered across the plant.

Read more...

---

Optimising energy consumption in the chemical industry
Anton Paar Analytical Instrumentation & Environmental Monitoring
To optimise energy consumption and save valuable resources on chemical process plants, operators have to continuously measure parameters such as concentration, raw density, sound velocity and refractive index. With Anton Paar’s wide product range, the process application team has many options for cutting-edge laboratory measurement technologies, and can develop tailor-made mathematical models for every application.

Read more...

---