TAG level switches are designed to detect the presence of materials that accrue in the surroundings of the electrode’s position. Materials can be fluids, powders, granules and conductive or non-conductive, grains, powders, plastics, oils or water. The electrode may be installed in free air or closed vessels, including metallic or non-metallic pipes or reservoirs.
Some of the principals on which the TAG units function are changes of RF current and voltage, loss of energy and changes of dielectric constant versus air.
RF is transferred from the feeler through the mass of the material to the ground point of the sensing unit. This causes RF energy losses. The variations of RF current are converted to a DC signal that is sent to the control box to activate the dry contact relay. The set will continue to function even when the feeler is completely covered by material.
The function of the sensing unit is not hampered by material sticking to it or influenced by the relative humidity of the environment. After initial fitment of TAG, no further adjustment is required of these fit-and-forget devices.
High-efficiency switching solutions
Operator Interfaces, Switches & Relays
Becker Mining South Africa has launched a new-generation energy distribution system that has been specially developed to enhance productivity and safety in the challenging conditions of local underground coal mines.
Read more...Telco sensors in the pulp and paper industry Gail Norton Instrumentation
Sensors & Transducers
The pulp and paper industry poses a major problem for most photoelectric sensors. The high level of contamination in these dusty, dirty and grimy environments makes it impossible for most competing sensors to operate and sense reliably and efficiently.
Read more...Optical fork sensor series Gail Norton Instrumentation
Sensors & Transducers
The OFS series consists of self-contained optical fork sensors that are housed in a durable, U-shaped aluminum housing, which operates in through-beam mode.
Read more...World-first solution for platinum miner ABB South Africa
Operator Interfaces, Switches & Relays
When a consulting engineering company approached ABB about a specific problem that its platinum mining client was experiencing at its smelter facility in the North West Province, it was an opportunity for the technology provider to showcase its innovation and adaptability in responding to specific customer requirements.
Read more...Robust industrial relays Vepac Electronics
Operator Interfaces, Switches & Relays
Industrial RT relays from Vepac are particularly robust and are used for high load control. RT modules can control up to three changeover contacts, with 10 A each. In addition, this product is equipped for safety reasons with manual operation, improved LEDs or free-wheeling diodes.
Read more...Telco sensors for accuracy and reliability Gail Norton Instrumentation
Sensors & Transducers
Photoelectric eyes have always needed perfect working conditions, but in the workplace, there is no such thing.
Read more...Sensors in conveyor belt monitoring Gail Norton Instrumentation
Sensors & Transducers
We all know how high the costs of damaged conveyors can be. Gail Norton Instrumentation Agencies has designed a unit that can effectively monitor conveyors and stop further damage.
Read more...Telco sensors for accuracy and reliability Gail Norton Instrumentation
Sensors & Transducers
Photoelectric eyes have always needed perfect working conditions, but in the workplace, there is no such thing.
Read more...Telco sensors in the pulp and paper industry Gail Norton Instrumentation
Sensors & Transducers
The pulp and paper industry poses a major problem for most photoelectric sensors. The high level of contamination in these dusty, dirty and grimy environments makes it impossible for most competing sensors to operate and sense reliably and efficiently.