Memocal CERTO multifunction calibrator

December 2013 Maintenance, Test & Measurement, Calibration

The Memocal CERTO (Documenting Process Calibrator) is a hand tool for calibration maintenance and troubleshooting of virtually all the control process instrumentation.

The calibrator can be also be used as a multichannel datalogger for electrical and temperature signals. The graphic mode allows users to display the trend and the replay function allows an electrical signal to be generated using the stored data. The DataCal PC software allows data storage in a hard-disk.

The instrument can be used as a temporary signal converter replacement. Any input signal (electric or pressure) can be converted into a 4–20 mA output. The galvanic insulation between the input and output channels also allows the use of this feature on the process. The unit can store and recall up to 10 complete instrument configurations.

Transmitter calibration

The Memocal CERTO can be configured to manage the check and the calibration of any pressure and temperature transmitter. The wide display lets users display the input and output values and to select the right units for the transmitter under test. The measuring circuit is also able to power the loop for a direct connection with the transmitter under test.

Software

The software has been designed to be used in industries where there are both laboratory and maintenance requirements. Its Windows software is designed to plan, manage and document all the calibrations and the certifications of the process instrumentation. Other features include:

* Automatic procedure run.

* Built-in communication with documenting calibrators.

* Traceable and editable calibration documents.

* Database backup ability.

* Simultaneous certification of more than one temperature sensor.

For more information contact ERO Electronic, +27 (0)11 869 1101, sales@eroelectronic.co.za, www.eroelectronic.edx.co.za

Further reading:

Collect data three times faster
SKF South Africa Maintenance, Test & Measurement, Calibration
SKF has extended its renowned Microlog Analyzer family of data collection devices with the addition of the Microlog Analyzer dBX. Currently SKF’s most powerful diagnostic tool, this cutting-edge device redefines diagnostic capabilities, enabling users to take measurements three times faster than its predecessor.

Read more...

---

The criticality of maintenance in the water and wastewater segment
Schneider Electric South Africa Maintenance, Test & Measurement, Calibration
In a time of water shedding, climate change and ageing infrastructure, the importance of maintenance and support in the water and wastewater segment cannot be overstated.

Read more...

---

How dry ice blasting is revolutionising the mining industry
Maintenance, Test & Measurement, Calibration
Dry ice blasting has emerged as a game-changing technology for the mining industry, offering a range of advantages that are reshaping traditional cleaning methods.

Read more...

---

Quality test tools save costs at pulp and paper mill
Comtest Editor's Choice Maintenance, Test & Measurement, Calibration
A case study on how preventive maintenance and a few good test tools avoided unnecessary motor replacements at a pulp and paper company.

Read more...

---

The logical solution to oil and gas industry corrosion
Maintenance, Test & Measurement, Calibration
The consequences of corrosion in the oil and gas industry can be astronomical. The simple culprit is metal reacting with oxygen and moisture, degrading it back to its natural state.

Read more...

---

Lube tip: foaming is affected by oil level
Wearcheck Maintenance, Test & Measurement, Calibration
In a circulating system, it is crucial to check the oil level before introducing anti-foam agents to address a foaming problem.

Read more...

---

Microfine filtration boosts fuel quality and reduces equipment failure
Maintenance, Test & Measurement, Calibration
The path to contamination-free fuels relies on a combined effort from refiners to transporters, storage depots, handlers and end users. Prior to use, fuels can be polished with multi-pass microfine filtration systems such as those exclusively manufactured by ISO-Reliability Partners.

Read more...

---

Supporting capital investment in machinery
Maintenance, Test & Measurement, Calibration
Industrial and mining operations are under increased financial pressure in the current economic and social climate in South Africa. This means that when businesses make capital investments in new equipment, they need to be sure that the machinery will function optimally for as long as possible.

Read more...

---

High-accuracy automated pressure calibrator
Maintenance, Test & Measurement, Calibration
The Additel 762 Automated Pressure Calibrator is unlike any other pressure calibrator on the market. This revolutionary product is a complete turnkey solution for automation of pressure calibration work ...

Read more...

---

Handheld pressure calibrator
Maintenance, Test & Measurement, Calibration
The 273Ex from Additel is an intrinsically safe handheld multifunctional pressure calibrator with an intuitive colour touchscreen interface. The unit features built-in quick test tasks and optional HART ...

Read more...

---