September 2005Maintenance, Test & Measurement, Calibration
Some applications, especially in safety related fields, require a module in the fieldbus node to be exchanged without disturbing the existing wiring. For this purpose, Wago is adding I/O modules with pluggable field wiring to the Wago-I/O-System 750. A pre-wired connector that plugs into the I/O module fulfils this function. The new modules are only slightly higher, the width and the depth remain the same as the existing modules.
The separation of the function layer and wiring layer eliminates a source of errors during module exchange and an exchange can be accomplished much faster than with individual wiring. At the same time the connector allows a fieldbus node to be pre-wired. Since it is possible to combine I/O modules with or without pluggable field wiring the user has the opportunity to choose the optimum type of connection for every single I/O module even within one fieldbus node. The connector allows the use of cable ties, if required, which makes it easier to bundle the wires. Direct testing aids commissioning and maintenance.
Collect data three times faster SKF South Africa
Maintenance, Test & Measurement, Calibration
SKF has extended its renowned Microlog Analyzer family of data collection devices with the addition of the Microlog Analyzer dBX. Currently SKF’s most powerful diagnostic tool, this cutting-edge device redefines diagnostic capabilities, enabling users to take measurements three times faster than its predecessor.
Read more...The criticality of maintenance in the water and wastewater segment Schneider Electric South Africa
Maintenance, Test & Measurement, Calibration
In a time of water shedding, climate change and ageing infrastructure, the importance of maintenance and support in the water and wastewater segment cannot be overstated.
Read more...Quality test tools save costs at pulp and paper mill Comtest
Editor's Choice Maintenance, Test & Measurement, Calibration
A case study on how preventive maintenance and a few good test tools avoided unnecessary motor replacements at a pulp and paper company.
Read more...The logical solution to oil and gas industry corrosion
Maintenance, Test & Measurement, Calibration
The consequences of corrosion in the oil and gas industry can be astronomical. The simple culprit is metal reacting with oxygen and moisture, degrading it back to its natural state.
Read more...Lube tip: foaming is affected by oil level Wearcheck
Maintenance, Test & Measurement, Calibration
In a circulating system, it is crucial to check the oil level before introducing anti-foam agents to address a foaming problem.
Read more...Microfine filtration boosts fuel quality and reduces equipment failure
Maintenance, Test & Measurement, Calibration
The path to contamination-free fuels relies on a combined effort from refiners to transporters, storage depots, handlers and end users. Prior to use, fuels can be polished with multi-pass microfine filtration systems such as those exclusively manufactured by ISO-Reliability Partners.
Read more...Supporting capital investment in machinery
Maintenance, Test & Measurement, Calibration
Industrial and mining operations are under increased financial pressure in the current economic and social climate in South Africa. This means that when businesses make capital investments in new equipment, they need to be sure that the machinery will function optimally for as long as possible.
Read more...High-accuracy automated pressure calibrator
Maintenance, Test & Measurement, Calibration
The Additel 762 Automated Pressure Calibrator is unlike any other pressure calibrator on the market. This revolutionary product is a complete turnkey solution for automation of pressure calibration work ...
Read more...Handheld pressure calibrator
Maintenance, Test & Measurement, Calibration
The 273Ex from Additel is an intrinsically safe handheld multifunctional pressure calibrator with an intuitive colour touchscreen interface. The unit features built-in quick test tasks and optional HART ...
printer friendly version