Valves, Actuators & Pump Control


Schubert & Salzer boost efficiency at BMW

August 2014 Valves, Actuators & Pump Control

In low pressure die casting, e.g. light metal engine blocks, the casting machines are filled by pressurising the furnaces. This requires highly precise pressure control along defined pressure curves in order to be able to produce a high quality casting and, for example, to prevent the metal pillars from moving around in the mould. In each case, BMW replaced the pressure control previously used for this purpose in its Landshut light metal foundry with a single sliding gate valve from Schubert & Salzer Control Systems. The outstanding control quality and the rapid reactive ability of the sliding gate valves have allowed the pressure head curves to be followed in a precisely reproducible manner.

In addition, they offer the possibility of compensating for process influences when furnaces of different sizes are used.

In the low pressure die casting process, the casting furnace is pressurised so that the molten metal flows up a riser tube into the casting machines. To ensure that the complete shape of the part is filled uniformly, it is absolutely essential to have a controlled rise in pressure. The pressure profile is crucial for quality in the casting process.

Sensitively adjustable pressure control is needed in order to reproduce these pressure curves time after time. It not only prevents pressure fluctuations, but also facilitates different mould filling speeds to optimise the filling of castings with different cross sections. BMW has all-round know-how in this area and is achieving a high degree of success in working with precisely defined casting pressure curves for the different versions of the component parts. Previously, a so-called valve organ with 13 digitally actuated valves of different sizes had been used to follow the pressure curve. While this pressure control was precise, there was a problem in that it was not immediately evident when a valve failed. The critical issue here was that the pressure curve was no longer being followed according to the reference data and the operator was not in a position to detect this. Therefore, a valve failure of this type could only be picked up by defects in the finished casting.

Josef Gibis, who has worked at BMW for 25 years and is currently the person responsible in Landshut for process development and design in the area of light metal foundry work, could not rest with this constraint. He searched for a valve solution that offered more process reliability. This would have to:

* Display a high level of quality with a rapid control response.

* Detect faults itself and flag them immediately.

* Be low on maintenance.

* Offer a good price-performance relationship.

The company HISTA Elektroanlagenbau Neutraubling, charged with the job of upgrading the foundry operations and developing new software for the comprehensive control processes, proposed that the 8021 sliding gate valve from Schubert & Salzer Control Systems, used already in other facilities, should be used here.

Flow-related advantages and variable Kvs values

The sliding gate valve offers a simple opportunity to modify the valve operating characteristics, which is the Kvs values as a function of the valve opening, almost infinitely. This can be done simply and in almost any conceivable number of ways by an appropriate configuration of the shape of the slit in the sliding discs.

After just two short project discussions on site, Schubert & Salzer‘s specialists calculated a Kvs value of 1,7 for BMW‘s foundry in Landshut. However, since different sizes of furnaces ranging from 1000 to 2500 kg serve a casting facility interchangeably, making it imperative that any process effects would have to be compensated, the sliding gate valve was selected at a Kvs value of 5 on an equal characteristic. As a result, not only does the sliding gate valve make it possible to follow the pressure curves precisely but it also has sufficient capacity with a larger opening to react to leakages, yet still be able to meter to the finest degree possible.

Outstanding rangeability and excellent control quality

The very good response behaviour in particular of the sliding gate valve is crucial for the excellent control quality. Short positioning paths, low moving masses and small actuation forces are the most important parameters for short reaction times with optimal resolution of the stroke position. The sliding gate valve offers all of these features in one package.

The typical stroke between open and closed is a mere 6 to 9 mm.

Sliding gate valves are an economically very efficient solution for a multitude of applications. Since they are available in different materials and in combination with all conventional positioners, they can be used in virtually all industrial areas and applications. Sliding gate valves are manufactured:

* In sizes DN 15 to DN 250.

* For pressures up to PN 100.

* For media temperatures between -200 and 530°C.

Sliding gate valves involved in process technology

The sliding gate valve is actuated at BMW by Schubert & Salzer‘s 8049 digital positioner. This highly accurate, electronic control circuit system was developed for the exact positioning of control valves. Using the configuration software DeviceConfig V7, a vast range of possibilities are available in setting the parameters of the positioner, such as:

* Setpoint signal range.

* Custom characteristics for a valve

* Hysteresis control.

* Operating direction.

* Configuration of the alarm output.

* Critical values for the maintenance alarms.

By using this positioner, the sliding gate valves are connected directly to the foundry control system and they issue messages concerning maintenance and diagnostic data as well as faults.

After the successful completion of the trial phase with the sliding gate valve in controlling casting pressures, BMW issued an order for the upgrading of one casting unit at the beginning of 2012. “We are looking for a valve that will fulfil our highest control requirements, that can be used for all sizes of furnaces and, as a result, offers additional scope in compensating for process effects,” says Gibis. “We are amazed at the precision with which these sliding gate valves fulfil these difficult control tasks.”

In view of these experiences, BMW recently issued an order to convert the pressure head control for nine further light metal casting units to sliding gate valves.

For more information contact Rowan Blomquist, Macsteel Fluid Control, +27 (0)31 581 7803, rowan.blomquist@macfluid.co.za, www.macsteel.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact valve position indicator
Emerson Automation Solutions Valves, Actuators & Pump Control
Emerson’s new TopWorx DVR Switchbox is an entry-level addition to the DV Series of valve position indicators. It combines a durable resin enclosure, compact size, and a patented cam design that provides a reliable valve position feedback for water and wastewater systems, food and beverage production lines, and industrial utilities.

Read more...
New pilot-operated relief valve
Emerson Automation Solutions Valves, Actuators & Pump Control
Emerson has introduced a pilot-operated relief valve for installation on pressurised bullet tanks used to store liquid propane and anhydrous ammonia. This type of pressure relief valve is typically installed on tanks fabricated by OEMs for end users, engineering firms, or contractor customers.

Read more...
Case History 191: The weakest link.
Michael Brown Control Engineering Valves, Actuators & Pump Control
Which is the weakest link in a control loop? The answer, without any doubt is that, in most cases, the final control element is the weakest link.

Read more...
High-flow solenoid valve
Emerson Automation Solutions Valves, Actuators & Pump Control
Emerson has introduced the new ASCO Series 327C solenoid valve, which features a direct-acting, high-flow design that provides superior flow-to-power ratio. It permits high flows at minimum power levels, making it ideal for use in power plants, refineries, and chemical processing facilities.

Read more...
Selection of two-port valves: an open and shut case
SMC Corporation South Africa Valves, Actuators & Pump Control
Little consideration is generally given to two-port valves because they are often perceived as simple devices that only open and close to control downstream fluid supply. Although this is mechanically true, choosing the optimal two-port valve for your application can make a big difference, saving space, weight and energy consumption.

Read more...
Emerson software optimises maintenance
Emerson Automation Solutions Valves, Actuators & Pump Control
Emerson has announced the Plantweb Insight Valve Health Application, a powerful software tool that combines Fisher control valve expertise with advanced analytic algorithms. The new app makes it possible for users to visualise an entire connected fleet of valves, while prioritising actions based on the health index of each valve.

Read more...
New-generation vacuum pumps
Valves, Actuators & Pump Control
Busch Vacuum Solutions has introduced the new MINK MM dry claw vacuum pumps. This new generation stands out for its minimal operating costs, low energy consumption and reduced CO2 footprint through reduced raw material requirements.

Read more...
Noise solutions for valves
Valves, Actuators & Pump Control
Emerson has announced its innovative new Fisher Whisper Trim technology for use in both rotary and globe valves. This next generation of technology addresses noise issues by using additive manufacturing to create trim designs with increased capabilities.

Read more...
Valves for severe service
Valve & Automation Editor's Choice Valves, Actuators & Pump Control
Valve specialist, Valve & Automation supplies total valve and control solutions to a wide range of key process industries across southern Africa. Chemicals and pulp and paper are top of its list of industries with demanding process conditions.

Read more...
Pinch valves for efficient flow control
Bearing Man Group t/a BMG Valves, Actuators & Pump Control
Included in BMG’s extensive portfolio of industrial slurry valves is a range of pinch valves, which have been developed to control the flow of liquids, powders, solids and abrasives in many industries.

Read more...