PLCs, DCSs & Controllers


Automated water treatment plants

April 2009 PLCs, DCSs & Controllers

The National Organization for Potable Water in Egypt contracts Bamag to construct three water treatment plants with a capacity of 800 litres per second.

The three plants are located at Shebin El Kom, El Baliana and Al Edwa, each featuring approximately 1200 I/O points. The aim was to automate process and system control using Beckhoff technology.

The first step of the potable water treatment process is clarification and filtering of the river water. Raw water to be treated is drawn from the Nile to the raw water sump pump, which serves as suction reservoir for the six raw water pumps contained in the pumping station. From here, raw water is passed into the flash mix chamber of the treatment plant. Clarified water is passed to the filter units via a clarified water channel and automatically controlled valves. All valves used for controlling the backwash procedure are controlled by a PLC. The filters are constant level type filters with the level controlled via a level sensor in each filter cell and a controller installed in the control desk of each filter.

Wash water pumps draw water from compartments in the wash water reservoir. Manual control is provided for the raw water chlorinators while automatic control is for the treated water chlorinators.

Automation objectives

Bamag’s aims for the automation of the control system included the following:

* Reliable system performance.

* Increasing plant productivity in terms of potable water quality and quantity.

* Safe operation regardless of operator mistakes.

* Maintaining the performance of each plant within the design limits without the need for deployment of expensive experts to respective sites.

* Cost-effective system support during the warranty period.

* General maintenance has to be simple so that it can be performed by the normal operating staff of the client.

* Minimum inventory of spare parts.

Due to the history of successful cooperation between Bamag and Industrial Control Systems, Cairo-based specialists for automation solutions and process control, ICS was awarded the contract for developing the control systems for the three water treatment plants. The control system was developed to be modular, expandable, cost-effective and rich in features, with an emphasis on reliability and minimum cost of system maintenance and support.

“After an elaborate task of evaluating and comparing systems offered by all major vendors, we came to the conclusion that they largely complied with our system requirements, but the initial cost and running costs were significantly higher when compared to the Beckhoff system,” Ahmad Sadek from ICS said. “The Beckhoff product range met all our criteria, and the CX Embedded PC and the Bus Couplers met our design objectives particularly well.”

The operating temperature and relative humidity were important factors for the decision to use Beckhoff products. At the three plant locations, two of which are in northern Egypt, temperatures during summer months can reach up to 50°C. Further benefits for the customer are the uniform design of the system components and their compatibility, which translates into minimum inventory of spare parts, and rapid training and familiarisation for the operating staff.

System control components

The control system consists of the PLC for automatic and manual functions, the control desks for manual operation and status feedback, and a mimic diagram for displaying the entire plant process flow diagram. Each part of the plant (sump pump for raw water, treated and sludge water, filtration system sump pump, chlorination and chemical dosing system) is equipped with a CX1000 that controls all functions. The filter system features 10 filters, each equipped with its own autonomous PLC (CX1000 with PROFIBUS interface) that controls the individual filter operations, both in automatic and in manual mode. The CX is networked via PROFIBUS with a master PLC that controls the backwash process according to the individual filter requirements. Due to the nature of the plant layout and the close interaction between events taking place at different parts of the plant, data have to be transferred from where they originate to where they are needed. In this way they become part of a complex protection or interlock scheme, leading to significant savings in cable runs, cost and time. Instead of using conventional hardwired control desks, the Beckhoff CP7831 and CP7832 Control Panels are utilised to function as the control desks.

PID soft controllers are used throughout the plant for level, pressure and flow control. The integration of the PID soft controllers into the Beckhoff system proved to be highly efficient. The entire plant is networked via Industrial Ethernet with a transfer speed of 100 Mbaud. The system achieves a response time of less than 10 milliseconds, ensuring a high degree of integrity. The traditional central mimic diagram was replaced with a large plasma display that provides real-time dynamic display of the central plant.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Complete system for transparent energy monitoring
Beckhoff Automation Editor's Choice Electrical Power & Protection
Transparent energy monitoring reduces both machine downtime and the necessity to oversize the corresponding components. Added to these advantages are simplified preventive maintenance, and increased production efficiency. The wide range of PC-based control technology from Beckhoff offers a solution that can be optimally adapted to individual applications.

Read more...
Powerful and versatile IIoT controller
ifm - South Africa PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.

Read more...
Condition monitoring in a forging press retrofit
Beckhoff Automation System Integration & Control Systems Design
Significantly increased vibration on machines can result in many forms of negative impacts such as reduced system performance or damage to the machine and foundation. Using the example of retrofitting a forging press with a maximum press force of 2000 tons, Wölfel Engineering explains how efficiently the process was tailored and implemented with PC-based control and measurement technology from Beckhoff.

Read more...
Thermoforming machine automation
Beckhoff Automation Editor's Choice Motion Control & Drives
Hamer has joined forces with Beckhoff to develop a thermoforming machine for water-based cellulose pulp to produce fully recyclable and environmentally-friendly cellulose packaging.

Read more...
ACTOM Industry to upgrade drive and control system
ACTOM Electrical Machines PLCs, DCSs & Controllers
ACTOM Industry secured an important contract to upgrade the drive and control system of a man-winder at a gold mine in Ghana.

Read more...
Powerful and versatile IIoT controller
ifm - South Africa PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.

Read more...
TwinCAT Chat integrates LLMs into the automation environment
Beckhoff Automation IT in Manufacturing
Large language models offer a number of benefits for both automation engineers and enterprise management. For automation engineers, LLMs have the potential to revolutionise the development process by automatically generating and completing code. From an enterprise management perspective, LLMs promote knowledge transfer within the organisation.

Read more...
Compact and integrated EtherCAT stepper motor drives
Beckhoff Automation Motion Control & Drives
The integrated ASI8100 stepper motor drive from Beckhoff’s range of compact drive technology products up to 48 V DC combines a stepper motor, stepper motor output stage and fieldbus connection in a space-saving design. As an EtherCAT slave, it can be placed directly on the machine without a control cabinet or upstream I/O level, allowing for highly compact, control cabinet-free machines.

Read more...
Precise detection of complex rotational movements
Beckhoff Automation Sensors & Transducers
The EP3751-0260 EtherCAT Box module by Beckhoff connects an acceleration sensor with an inertial measurement unit - a gyroscope. This provides accurate detection of acceleration and rotational motion in addition to shock, vibration and tilt measurement, both as preprocessed values and as raw sensor data.

Read more...
Easy integration of a motor into a machine
Beckhoff Automation Motion Control & Drives
The AL8000 and AL8100 linear motor series now offers integrated position detection, thanks to the addition of a feedback system. This makes the entire process of integrating a motor into a machine much easier, as users no longer have to mount the scanning head themselves. Users also benefit from all the advantages of Beckhoff’s One Cable Technology.

Read more...