classic | mobile
 

Search...

SA Instrumentation & Control Buyers' Guide

Technews Industry Guide - IIoT 2017

Technews Industry Guide - Maintenance, Reliability & Asset Optimisation

 

New comparison test pump from WIKA
May 2018, Maintenance, Test & Measurement, Calibration


WIKA’s new model CPP100-M comparison test pump will generate pneumatic pressures up to 100 bar easily and precisely without the need for external pressure supply. It can also be used for vacuum generation to -950 mbar. The maximum pressure or vacuum achievable is dependent upon the connected test volume.

For accurate comparative testing, precise setting is possible using the fine adjustment valve. The reference instrument, as well as the instrument to be tested, can be mounted on the test connections at the side as both test connections feature a freely rotating knurled nut with an M20 x 1.5 female thread. The nut also enables the instruments to be aligned for convenient viewing. Two compatible adapters to G ½ female thread and ½ NPT female thread are also included.


Credit(s)
Supplied By: WIKA Instruments
Tel: +27 11 621 0000
Fax: +27 11 621 0060/59
Email: sales@wika.co.za
www: www.wika.co.za
Share via email     Share via LinkedIn   Print this page

Further reading:

  • Flowmeter for oil and gas
    June 2018, WIKA Instruments, Flow Measurement & Control
    WIKA’s new ProPak flowmeter is a combination of proven and innovative technologies for flow profile formation. It sets new standards in terms of performance and surpasses other technologies by a long ...
  • Fibre optic temperature monitoring of switchgear
    June 2018, Spero Sensors & Instrumentation, Maintenance, Test & Measurement, Calibration
    AP Sensing’s passive fibre optic cable provides accurate temperature measurements along the length of equipment such as a conveyor belt, or inside switchgear. The system enables cost-effective monitoring ...
  • IIoT platform for motor quality analysis
    June 2018, CIS Industrial Services, Maintenance, Test & Measurement, Calibration
    Motors drive industry and provide convenience in everyday life. However, if they are not maintained they can fail, which will interrupt production, affect revenue, energy efficiency and product quality, ...
  • RS Components launches thermal imaging products
    June 2018, RS Components SA, Maintenance, Test & Measurement, Calibration
    RS Components has announced availability of a new series of thermal imaging and test and measurement products from FLIR. Primarily targeting electricians, electrical engineers and technicians, and those ...
  • Wedge flowmeter
    June 2018, WIKA Instruments, Flow Measurement & Control
    The model FLC-WG wedge flowmeter consists of a pipe inside which a V-shaped wedge is fitted. Through this constriction, a differential pressure is generated which is dependent upon the volume flow. ...
  • Lever-action grease coupler
    June 2018, SKF South Africa, Maintenance, Test & Measurement, Calibration
    SKF recently released the lever-action coupler. Developed to optimise grease gun lubricant delivery, this coupler is available in two versions – one for battery powered grease guns and one for manual ...
  • Customised calibration and commissioning concepts ensure system availability
    May 2018, Endress+Hauser, Maintenance, Test & Measurement, Calibration
    The Endress+Hauser approach exceeds compliance requirements and delivers unsurpassed plant availability.
  • Drive alignment reduces wear
    May 2018, Bearing Man Group t/a BMG, Maintenance, Test & Measurement, Calibration
    BMG’s extensive range of Fenner power transmission components encompasses the Fenner Drive Alignment Laser instrument, designed for accurate pulley and sprocket alignment, to reduce wear on belts and ...
  • SKF at the forefront of digitalisation
    May 2018, SKF South Africa, Maintenance, Test & Measurement, Calibration
    The ability to collect and manipulate vast amounts of digital information will catapult manufacturing into the future. By embracing digitalisation, SKF aims to enhance its core offering – bearings technology, ...
  • Four common pressure calibration pain points
    May 2018, Comtest, Maintenance, Test & Measurement, Calibration
    1. Performing pressure calibration when a slow leak is present Performing a proper pressure calibration requires equipment and connectors that are dependable. With a leaking pressure source, keeping ...
  • The peak of performance
    May 2018, Siemens Digital Factory & Process Indust. & Drives, Maintenance, Test & Measurement, Calibration
    Maintenance of the world’s steepest cogwheel railway automated with technology from Siemens.
  • Omron introduces condition monitoring devices
    May 2018, Omron Electronics, Maintenance, Test & Measurement, Calibration
    Omron Corporation has introduced four series of condition monitoring devices for workers to monitor the operational status at manufacturing sites:    • Motor condition monitoring devices that predict the ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    classic | mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.