classic | mobile
 

Search...

SA Instrumentation & Control Buyers' Guide

Technews Industry Guide - IIoT

Technews Industry Guide - Maintenance, Reliability & Asset Optimisation

 

Telco sensors for safety in mobile racking systems
December 2016, Sensors & Transducers


Mobile racking enables compact storage while keeping the stored pallets individually accessible. Where storage space is expensive, for example in cold stores, mobile racking is the perfect solution. Telco Sensors makes sure safety is guaranteed by an infrared beam system, mounted on each mobile rack and at the outer sides of the complete installation.

Light transmitters (LT) and light receivers (LR) are installed so the beam runs parallel along the bottom edge of the storage rack, approximately 10 cm in front of it. If there is any object or person present, the beam will be blocked and the Telco amplifier (PA) will activate the output causing the rack controller to deactivate the motors immediately. The rack will continue its movement as soon as the beam has been re-established. The Telco Sensors 9000 series Spacemaster transmitter and receiver offer a solid state relay output as an alternative to the NPN/PNP transistor output.

For more information contact Gail Norton Instrumentation, +27 (0)31 701 4861, telco@telcosa.co.za, www.gailnortoninstrumentation.co.za


Credit(s)
Supplied By: Gail Norton Instrumentation
Tel: +27 31 701 4861
Fax: +27 31 702 9819
Email: telco@telcosa.co.za
www: www.gailnortoninstrumentation.co.za
Share via email     Share via LinkedIn   Print this page

Further reading:

  • Omron combats counterfeiting in pharmaceutical applications
    February 2017, Omron Electronics, Sensors & Transducers
    Omron’s expertise in machine automation and vision systems means it is ideally placed to advise and assist in implementing serialisation systems to reduce counterfeiting and improve consumer information ...
  • Accurate water activity measurement in food
    February 2017, Labotec, Sensors & Transducers
    Free water in food products can be jointly responsible for the growth of undesirable organisms, such as bacteria or fungi, as well as chemical or biochemical reactions that react to form polymeric products, ...
  • Telco Sensors solve packaging problem
    February 2017, Gail Norton Instrumentation, Sensors & Transducers
    Telco Sensors provide the packaging industry with photoelectric/infrared sensor solutions for challenging applications. The company’s sensor solution experience and problem solving spans various fields ...
  • Leuze’s new contrast sensor
    February 2017, Countapulse Controls, Sensors & Transducers
    A new contrast sensor that combines product usability with high performance has been added to the Leuze sensing solution product line-up. Ideally suited to packaging processes, the innovative sensor will ...
  • Fibre optic sheet break detector
    February 2017, UIC Instrumentation, Sensors & Transducers
    Kajaani Process Measurements’ KB2 fibre optic sheet break detector is designed to handle all kinds of break detection applications. With RGB-colour based sensing it can detect different colours and then ...
  • Inductive sensors for intelligent position monitoring
    February 2017, ifm Electronic RSA, Sensors & Transducers
    ifm’s new inductive sensors with IO-Link incorporate several functions in one unit. They can be used as switching sensors with adjustable switch point or measuring systems with a measured value transmitted ...
  • Temperature measuring amplifiers with ultra high channel density
    February 2017, RET Automation Controls, Sensors & Transducers
    Turck has added the IMX12-TI temperature measuring amplifier to its IMX interface technology series. With a width of only 12,5 mm and a high channel density, the devices save valuable space in the cabinet. ...
  • Jumo sensors with IO-Link
    February 2017, ASSTech Process Electronics + Instrumentation , Sensors & Transducers
    Jumo has introduced two new sensors with an IO-Link interface – the dTRANS p35 pressure sensor and the dTRANS T1000 temperature sensor. Both have a wide application range, from tool machines to the food ...
  • Capacitive sensors with IO-Link
    January 2017, RET Automation Controls, Sensors & Transducers
    Turck has introduced its BCT capacitive sensors with an IO-Link interface. IO-Link makes it easy to set the parameters of the capacitive switch in applications such as level control. The internal process ...
  • Switch-point level control sensor
    January 2017, Gail Norton Instrumentation, Level Measurement & Control
    The TAG level switch functions in all kinds of materials, conductive as well as non-conductive fluids, grains, powders, plastic raw materials, oils and fuels, water and sewage etc. The function of the ...
  • LVIT technology offers flexibility in factory automation
    January 2017, Sensors & Transducers
    LVITs (linear variable inductive transducers) are relatively low-cost, contactless position sensing devices, which utilise eddy currents induced in the surface of a conductive movable element that is ...
  • Weld nut sensor detects M5 nuts
    January 2017, RET Automation Controls, Sensors & Transducers
    Turck has added variants with a 4 mm sensor probe to its range of weld nut sensors. This makes the detection of missing M5 nuts before welding even simpler. Turck has also improved the abrasion resistance ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    classic | mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.