classic | mobile
 

Search...

SA Instrumentation & Control Buyers' Guide

 

Zest’s miniature circuit breakers for complete solutions
December 2015, Operator Interfaces, Switches & Relays


A full range of approved miniature circuit breakers, offering protection against overload and short circuit in electric conductors, is available from Zest WEG Group. The WEG MDW and MDWH miniature circuit-breaker line comply with the tripping characteristic curves B and C, according to standards IEC 60898 and IEC 60947-2.

These miniature circuit breakers have been developed to be used in low voltage circuits with direct or alternating current from 2 to 125 A and short circuit breaking capacity up to 10 kA. The full range includes all accessories in both 5 kA and 10 kA, making it possible for the Zest WEG Group to supply customers with complete solutions for specific projects.

All the circuit breakers can be used in both commercial and domestic applications.

For more information contact Kirsten Larkan, Zest WEG Group, +27 (0)11 723 6000, kirstenl@zest.co.za, www.zest.co.za


Credit(s)
Supplied By: Zest WEG Group Africa
Tel: +27 11 723 6000
Fax: +27 11 723 6001
Email: info@zestweg.com
www: www.zestweg.com
Share via email     Share via LinkedIn   Print this page

Further reading:

  • High-efficiency motors are cost savers
    August 2017, Zest WEG Group Africa, Electrical Power & Protection
    As Africa’s mines work to hold down costs and extract more value from their assets, modern high-efficiency motors from Zest WEG Group are helping to cut energy bills and maintenance. “Almost two-thirds ...
  • Solar powered VSDs for borehole applications
    August 2017, Zest WEG Group Africa, Electrical Power & Protection
    Farmers are making increasing use of photovoltaic solar panels and variable speed drives (VSDs) to get clean and continuous power to their boreholes in remote locations, cutting out the need for costly ...
  • Universal process panel meter
    August 2017, Extech Safety Systems, Operator Interfaces, Switches & Relays, IS & Ex
    Beka associates is pleased to announce the introduction of the Advisor A90 universal process meter, designed and manufactured by Beka in the UK to the same exacting standards as its hazardous area indicators ...
  • Timers and clocks for hazardous areas
    August 2017, Extech Safety Systems, Operator Interfaces, Switches & Relays, IS & Ex
    Beka’s new third generation timer/clock’s applications as a timer include simply displaying the time interval between two events detected by a hazardous area sensor. As a clock, local time can be displayed ...
  • Commitment to Africa is not just about money
    July 2017, Zest WEG Group Africa, News
    When companies invest in Africa by setting up production facilities here, they contribute far more than just finances, buildings and equipment; they offer their host countries a shortcut into the global ...
  • Building machines and panels made easy
    June 2017, Schneider Electric South Africa, Operator Interfaces, Switches & Relays
    Schneider Electric’s Harmony range of switches and indicators has been developed to ensure the highest possible level of reliability while offering a modern design to enhance an industrial machine’s aesthetic ...
  • Farmers should not underestimate motor power requirements
    June 2017, Zest WEG Group Africa, Electrical Power & Protection
    Many readers will be surprised that over 40% of global electricity is consumed by electric motors, and even more surprised that the figure for South Africa is higher still, according to Zest WEG Group ...
  • Placing critical visual alarms in hazardous areas
    May 2017, Omniflex Remote Monitoring Specialists, Operator Interfaces, Switches & Relays
    Local panels in plants perform vital safety functions and in hazardous locations, local panels must perform without compromising the integrity of the area. Annunciators have a primary safety role in local ...
  • Contactless coded safety switch
    May 2017, RET Automation Controls, Operator Interfaces, Switches & Relays
    Interlocking devices are solutions used to protect operators from dangerous machinery. As such, they represent an important and fundamental element of the machine and should be integrated during the early ...
  • Paperless recorder with manipulation detection
    May 2017, ASSTech Process Electronics + Instrumentation , Operator Interfaces, Switches & Relays
    Germany-based, Jumo’s well known Logoscreen 600 paperless recorder is now available with FDA compliant data recording and manipulation detection. The new extra code 887 ‘manipulation detection with digital ...
  • The cutting edge of collaborative robotics
    Africa Automation Fair 2017 Preview, Operator Interfaces, Switches & Relays
    Universal Robots is at the cutting edge of collaborative robotics. Visit Stand B31 to find out how these robots work in conjunction with operators on the line or join an existing line, allowing easy integration ...
  • Gigabit managed Ethernet switch
    Africa Automation Fair 2017 Preview, RJ Connect, Operator Interfaces, Switches & Relays
    The EDS-518E Gigabit-managed Ethernet switch is designed for rigorous mission-critical applications, such as factory automation, ITS and process control. The three Gigabit Ethernet ports allow great flexibility ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    classic | mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.